• Title/Summary/Keyword: Bingham 모델

검색결과 58건 처리시간 0.02초

MR 댐퍼의 제작과 Bingham 모델의 매개변수 추정 (Manufacturing of MR Dampers and Estimation of the Bingham Model Parameters)

  • 이건명;박문수
    • 한국기계가공학회지
    • /
    • 제13권6호
    • /
    • pp.82-87
    • /
    • 2014
  • Small MR dampers with a simple structure were designed and manufactured. The Bingham model was used to represent the dynamic characteristics of the damper, and the parameters of the model were estimated from experimental data which were obtained by harmonic tests. The value of the estimated yield shear force remains positive when no electric current is applied, and it increases slowly with the current. The estimated viscous damping coefficient has a value close to zero when no electric current is applied, and it increases almost linearly with the current.

선형화 기법을 이용한 MR 감쇠기 성능평가 (Performance Evaluation of MR Damper using Equivalent Linearization Technique)

  • 이상현;민경원;이명규
    • 한국지진공학회논문집
    • /
    • 제9권2호통권42호
    • /
    • pp.1-6
    • /
    • 2005
  • 본 논문의 목적은 구조물의 지진응답제어를 위해 사용되는 MR 감쇠기의 성능을 선형화기법을 이용하여 등가의 선형 점성으로 표현하고, 이를 MR감쇠기가 설치된 축소건물에 대한 시스템식별 실험을 통해 얻은 결과와 비교하여, MR 감쇠기의 성능평가에 대한 선형화 기법의 타당성을 검증하는 것이다. 먼저, MR 감쇠기의 이력모델로 많이 사용되는 모델 중, 수학적 표현이 간단한 Bingham 모델에 등가선형화 기법을 적용하여 등가의 점성을 구하였다. 그리고, 진동대 가진실험을 통해 얻어진 MR감쇠기가 설치된 3층 소형구조물의 전달함수로부터 모드정보를 추출하고 이를 사용하여 구조물의 점성행렬을 구하였다. 선형화기법을 통해 Bingham 모델을 사용하여 예측된 점성과 실험을 통해 얻어진 MR감쇠기에 의해 증가된 점성은 5% 오차범위 이내로 일치된 결과를 보여준다.

레올로지 모델을 이용한 토석류 이동해석 (An Analysis of Debris Flow Movements Using Rheological Model)

  • 김상규;서흥석
    • 한국지반공학회지:지반
    • /
    • 제13권5호
    • /
    • pp.133-144
    • /
    • 1997
  • 기존에 발생된 토석류 퇴적물에 대한 점도실험으로북터 세립질의 성질이 빙함 소성(Bingham plastic) 모델로 표현될 수 있다는 사실이 판명되었다. 이러한 사실과 비뉴톤유체의 흐름을 해석 할 수 있도록 개발된 수치해석 프로그램 Polyflow를 이용하여 토석류의 이동을 해석하였다. 그 결과 실제와 유사한 이동결과가 얻어졌으므로 토석류의 이동은 이와 같은 기법으로 해석할 수 있다는 것을 알게 되었다.

  • PDF

압착모드하에서 ER유체의 빙햄특성 및 댐핑력 제어 (Bingham Properties and Damping Force Control of an ER Fluid under Squeeze Mode)

  • 홍성룡;최승복
    • 한국정밀공학회지
    • /
    • 제19권11호
    • /
    • pp.37-45
    • /
    • 2002
  • This paper presents the field-dependent Bingham characteristics and damping force control of an electro-rheological (ER) fluid under squeeze mode operation. The squeeze force of the ER fluid due to the imposed electric field is analyzed and an appropriate size of the disk-type electrode is devised. On the basis of the theoretical model of the ER fluid under squeeze mode operation, the yield stress and response speed of the ER fluid are distilled from the time responses of squeeze force to the step electric potentials. Measured squeeze forces under various excitation conditions are compared with the predicted ones from Bingham model and time constant obtained at the transient response test. In addition, the controllability of the field-dependent damping force of the ER fluid under squeeze mode is experimentally demonstrated by implementing simple PID controller.

MR제어기의 마찰력비에 따른 단자유도 구조물의 응답감소 (Response Reduction of a SDOF Structure based on Friction Force Ratio of MR Controller)

  • 성지영;민경원
    • 한국전산구조공학회논문집
    • /
    • 제23권4호
    • /
    • pp.435-443
    • /
    • 2010
  • 본 연구에서는 MR(Magneto-Reological)제어기가 설치된 단자유도 구조물의 응답을 예측하기 위하여 구조물의 운동방정식을 해석적으로 분석하고 주요변수를 파악하였다. MR제어기의 수치 모델로는 마찰 및 점성감쇠로 단순모델한 Bingham모델을 사용하였다. 자유진동과 조화진동일때의 응답감쇠를 결정짓는 주요변수가 각각 마찰력과 최대정적복원력의 비 $R_f$, 마찰력과 최대조화가진력의 비 $R_h$ 임을 파악하였다. 비선형 미분방정식을 등가의 선형 미분방정식으로 변환하기 위하여 마찰력에 의한 에너지 소산을 등가의 점성에너지로 치환하여 등가점성감쇠와 등가점성감쇠비를 유도하였다. 마지막으로 등가선형화과정을 검증하기 위하여 실제 지진에 대한 구조물의 응답을 비선형 미분방정식의 해와 비교하였다.

구조물의 진동 제어를 위한 압착식 MR 감쇠기의 동적 모델링 (Dynamic Modeling of Semi-active Squeeze Mode MR Damper for Structural Vibration Control)

  • 허광희;전준용
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제13권2호통권54호
    • /
    • pp.172-180
    • /
    • 2009
  • 일반적으로 MR 감쇠기를 이용한 준능동 제어 시스템을 구축하기 위해서는 감쇠장치의 동적모델이 요구된다. 여기서, 동적모델링은 감쇠장치의 발생 감쇠력 및 거동 성향 등을 수치적으로 예측하는 것이다. 따라서 본 연구에서는 이러한 MR 감쇠기의 동적거동을 실무적인 관점에서 합리적으로 모델링하기 위하여 다양한 동적모델 중 Power 모델 및 Bingham 모델을 적용해 MR 감쇠기의 동적거동특성을 예측 평가하였다. 이때 활용한 MR 감쇠기의 실험결과는 압착식 형태로 개발된 MR 감쇠기를 대상으로 동하중 실험을 수행하여 획득하였으며, 힘-변위 이력곡선으로부터 준능동 제어장치로의 타당성을 확인하였다. 또한, 각 동적모델의 예측성능을 평가하기 위하여 우선 실험결과를 이용해 각 동적모델 별 모델변수를 규명하였고, 이를 바탕으로 힘-속도 관계곡선 및 예측된 발생 감쇠력의 오차율을 산출하여 개발된 압착식 MR 감쇠기의 실험결과와 상호 비교 평가하였다. 최종적으로 본 연구에서 개발한 압착식 MR 감쇠기는 준능동 제어장치로 활용 가능함을 확인하였고, 평가된 두 가지 동적모델은 모두 우수한 예측성능을 보임으로써 본 연구에서 개발한 압착식 MR 감쇠기는 물론 MR유체를 이용한 다양한 형태의 감쇠장치의 거동특성을 수치적으로 예측하기 위하여 간단히 활용될 수 있는 가능성을 제시하였다.

준능동 진동 제어를 위한 MR 감쇠기의 동적 모델링을 통한 특성분석 (Characteristics and Dynamic Modeling of MR Damper for Semi-active Vibration Control)

  • 허광희;전승곤
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제17권6호
    • /
    • pp.61-69
    • /
    • 2013
  • 본 연구에서는 준능동 진동 제어를 위한 MR 감쇠기의 동적 모델링을 통한 특성을 분석 및 평가하였다. 실제 구조물 크기의 모형구조물을 진동제어하기 위하여 Semi-active 성능의 MR Damper를 설계/제작 하였다. 일반적으로 MR Damper를 이용한 준능동 제어 시스템을 구축하기 위해서는 감쇠장치의 발생 감쇠력 및 거동 성향 등의 데이터를 수치적으로 나타낼 수 있는 동적 모델이 요구된다. 따라서 본 연구에서는 MR Damper의 동적거동을 예측/평가 할 수 있는 모델링을 하기 위하여 다양한 동적 모델 중 Power 모델 및 Bingham 모델을 적용하였다. 이때 동적 모델과 비교/평가하기 위하여 개발된 MR Damper의 동하중 실험을 수행하였다. 동하중 실험조건은 가진 주파수를 (0.15Hz, 1.0Hz, 2.0Hz) 선정하고, 주파수별 각각 3가지씩 가진 속도를 달리하여, 변위가 감쇠력에 미치는 영향력을 확인하였다. 이렇게 얻어진 MR Damper의 동하중실험 결과를 적용하여 각 동적 모델 별 모델변수를 규명하였고, 이를 바탕으로 힘-속도 관계곡선 및 예측된 발생 감쇠력을 산출하였으며, 산출된 결과와 개발된 MR Damper의 실험 결과를 상호 비교 평가하였다. 최종적으로 본 연구에서 개발한 MR Damper는 준능동 제어장치로 활용 가능함을 확인 하였고, 다양한 변위를 이용한 실험을 통하여 정상적인 진동제어를 위해서는 최소 2mm 이상의 변위가 확보되어야 한다는 결과를 얻었다.

전도성 모델에 의한 키토산 현탁액의 유변학적 특성 연구 (Electrorheology of Chitosan Suspension by Conduction Models)

  • 최웅수;안병길;이상순;권오관
    • Tribology and Lubricants
    • /
    • 제14권4호
    • /
    • pp.95-99
    • /
    • 1998
  • The electrorheological (ER) behavior of chitosan suspension in the silicone oil was investigated. Chitosan suspension showed a typical ER response, Bingham flow behavior upon application of an electric field due to the polarizability of the branched amino group of the chitosan particles. The shear yield stress exhibited a linear dependence on the volume fraction of particles and the squared electric field. On the basis of the experimental results, chitosan suspension has been correlated with the conduction models for ER response and found to be an ER fluid.

전도성 모델에 의한 인산에스테르셀룰로오즈 현탁액의 전기유변학적 특성 연구 (Electrorheological Properties of Cellulose Phosphate Ester Suspension by Conduction Models)

  • 최웅수;고영건;박용성;권오관
    • Tribology and Lubricants
    • /
    • 제17권2호
    • /
    • pp.124-129
    • /
    • 2001
  • The electrical and rheological behaviors of the cellulose phosphate ester suspension in the silicone oil were investigated. Cellulose phosphate ester suspension showed a typical ER response (Bingham flow behavior) upon application of an electric field. The shear stress for the cellulose phosphate ester suspension exhibited a linear dependence on the volume fraction of particles and a square power of the electric field. On the basis of the experimental results, cellulose phosphate ester suspension correlated with the conduction model of Tang et al, and found to be an ER fluid.

승용차용 MR 댐퍼의 댐핑력 이력현상 모델 (Hysteresis Model of Damping Forces of MR Damper for a Passenger Car)

  • 이순규;최승복
    • 한국자동차공학회논문집
    • /
    • 제9권1호
    • /
    • pp.189-197
    • /
    • 2001
  • This paper presents hysteresis models of damping forces of a magneto-rheological (MR) damper which is applicable to a middle-sized passenger vehicle. After manufacturing a cylindrical type of the MR damper, its field-dependant damping force and hysteresis behavior are experimentally evaluated. Three different models ; Bingham model, Bouc-Wen model and Polynomial model are provided to predict the hysteretic damping force. The damping force characteristics predicted from three different models are compared with the measured results under various excitation conditions.

  • PDF