• Journal of KIBIM
• /
• v.11 no.3
• /
• pp.67-74
• /
• 2021

An IFC file is dependent on the IFC schema. Because of this relationship, most IFC-using software reads and interprets the IFC File by employing an early binding method, which uses a standard IFC schema. In the case of most open sources, early binding methods using standard IFC schema have a problem that they cannot express extra information of IFC File out of extended IFC schema. Also, in the case of previous studies, they suggested schema extension, such as adding attribute information to the schema, rather than the interpretation of IFC File. This study research on method of extracting shape and attribute information was conducted by analyzing the IFC File produced through the Port schema, which is an extended IFC schema. Three objects were created using the reference relationship between the Port schema definition and the IFC entity, and, at the end, the three objects were combined into one object. It has been confirmed that the shape and property data were express properly while delivering the combined object to the viewer. The process is possible because of the method of matching IFC schema and IFC File, which is dependent on IFC schema but not early binding method. However, this method has some drawbacks, such that contemporaneously generated many objects consume many memory spaces. Future research to investigate that issue further is needed.

• Journal of Electrochemical Science and Technology
• /
• v.9 no.4
• /
• pp.330-338
• /
• 2018

The adhesion strength as well as the electrochemical properties of $LiNi_{0.4}Mn_{0.4}Co_{0.2}O_2$ electrodes containing various conductive carbons (CC) such as fiber-like carbon, vapor-grown carbon fiber, carbon nanotubes, particle-like carbon, Super P, and Ketjen black is compared. The morphological properties is investigated using scanning electron microscope to reveal the interaction between the different CC and the active material. The surface and interfacial cutting analysis system is also used to measure the adhesion strength between the aluminum current collector and the composite film, and the adhesion strength between the active material and the CC of the electrodes. The results obtained from the measured adhesion strength points to the fact that the structure and the particle size of CC additives have tremendous influence on the binding property of the composite electrodes, and this in turn affects the electrochemical property of the configured electrodes.

• Journal of Korea Multimedia Society
• /
• v.8 no.3
• /
• pp.372-378
• /
• 2005

When a mobile node changes a sub network using Mobile IP, it must register its current location to the home agent. If a mobile node is far from its home network, the Binding Update (BU) time delay is longer and affects its connection state. To solve such a BU delay problem, a new component in HMIPv6, called MAP, supports the mobility of mobile node to reduce the signaling delay in handover However, in hierarchical MAP architecture, the register concentration to a specific MAP may be occurred, which affects the network management wholly. In this paper, we propose a MAP selection scheme based on ioad balancing by the mobility factor and the traffic property. By the mobility factor and the traffic property, a mobile node can select a adequate MAP on its mobility factor and traffic characteristic.

• Korean journal of food and cookery science
• /
• v.28 no.6
• /
• pp.871-881
• /
• 2012

To compare the physicochemical and gel properties of mung bean starches prepared by different purification methods, starches from Korean Eohul variety and Chinese mung bean (MB) with or without hull using alkaline solution or water as solvent were purified. The optimum conditions for making muk were investigated. Apparent amylose and total dietary fiber contents, water binding capacity, solubility and pasting properties by RVA were analyzed. The characteristics of starch gels (10% dry basis) were measured for 0 and 4 day stored at $4^{\circ}C$. The protein and ash contents were significantly different (p<0.05) and lowered in starch from dehulled MB using alkaline solution. The starches from dehulled MB using alkaline solution showed the lowest color differences. Apparent amylose contents of Eohul and Chinese starches showed 37.06-39.03% and 31.57-32.74%, respectively. Chinese starch was higher in water binding capacity but lower in solubility at $85^{\circ}C$ than others. Peak, trough, cold, and breakdown viscosities of Eohul starch were higher than those of Chinese one. Mung bean starch gel made immediately exhibited clear and glossy appearance but became whiter like milk. The crystallinities of starch and starch gel showed A and B types, respectively. The hardness, gumminess, and resilience of starch gel made immediately and hardness, cohesiveness, gumminess, and resilience of 4 day stored gels were different significantly (p<0.05). Especially, Eohul starch gels purified from hulled MB showed higher resilience (bending property) and hardness. Therefore, it was suggested that high quality muk would be made using MB starch purified from hulled Korean mung bean using water as solvent.decreased in contain more than 20% of SGP added groups. The optimal concentration of SGP was found in the range of less than 10%.

• Macromolecular Research
• /
• v.17 no.3
• /
• pp.174-180
• /
• 2009

Chemical modification of titanium/titanium oxide (Ti/$TiO_2$) substrates has recently gained a great deal of attention because of the applications of Ti/$TiO_2$-based materials to biomedical areas. The reported modification methods generally involve passive coating of Ti/$TiO_2$ substrates with protein-resistant materials, and poly(ethylene glycol) (PEG) has proven advantageous for bestowing a nonbiofouling property on the surface of Ti/$TiO_2$. However, the wider applications of Ti/$TiO_2$ based materials to biomedical areas will require the introduction of biologically active moieties onto Ti/$TiO_2$, in addition to nonbiofouling property. In this work, we therefore utilized surface-initiated polymerization to coat the Ti/$TiO_2$ substrates with polymers presenting the nonbiofouling PEG moiety and subsequently conjugated biologically active compounds to the PEG-presenting, polymeric films. Specifically, a Ti/$TiO_2$ surface was chemically modified to present an initiator for atom transfer radical polymerization, and poly(ethylene glycol) methacrylate (pEGMA) was polymerized from the surface. After activation of hydroxyl groups of poly(pEGMA) (pPEGMA) with N,N'-disuccinimidyl carbonate, biotin, a model compound, was conjugated to the pPEGMA films. The reactions were confirmed by infrared spectroscopy, X-ray photoelectron spectroscopy, contact angle goniometry, and ellipsometry. The biospecific binding of target proteins was also utilized to generate micropatterns of proteins on the Ti/$TiO_2$ surface.

• Textile Coloration and Finishing
• /
• v.16 no.3
• /
• pp.22-30
• /
• 2004

The polyester fabrics were treated with the chitosan with various solubility in optimized treatment condition. The treatment method was discussed to be a high functional finishing for the polyester fabric to obtain the high moisture absorption and anti-microorganism property by evaluating the effect of the chitosan purification method on the yield and anti-microorganism property of the chitosan. On the other hand, soluble polyurethane was added to the chitosan treatment solution and/or plasma pretreatment was done. The addition of soluble polyurethane give a high add-on ratio as well as a linen like effect of treated polyester fabric. The results were as follows: 1. In the treatment of polyester fabric by the chitosan solution, a soluble PU resin and low temperature plasma treatment were done to obtain high binding force between the fabrics and the chitosan. The add-on rate and the moisture absorption ratio of the fabrics treated with the chitosan-PU after treated with the plasma slightly increased more than those of the fabrics treated with the chitosan only. 2. Anti-static property of the fabrics treated with the chitosan decreased rapidly with increasing of the chitosan concentration. The washing fastness of the fabrics treated with the chitosan-PU after treated with the plasma was better than those of the fabrics treated with chitosan only. The wrinkle resistance of the treated fabrics decreased constantly with the concentration of the chitosan. The bending rigidity of the treated fabrics increased greatly. On the treatment of polyester fabric under optimum condition, the microorganism reduction rate kept above 90％ after 10times launderings. 3. As the polyester fabrics which has flat yam was used as a weft yams were treated with the chitosan-PU as give a functional finishing effects such as durability, moisture absorption, anti-static and anti- microorganism property. Treated polyester fabric showed a good functional finishing effect and a linen like property.

• The Korean Journal of Pharmacology
• /
• v.30 no.2
• /
• pp.153-165
• /
• 1994

In this study, we tested the influences of several ${\kappa}$ opioid ligands on the $[^3H]diprenorphine$ binding in rat and guinea pig cortex membrane preparations. Using paradigm to block ${\mu}\;and\;{\delta}$ opioid receptors with $DAMGO(1{\mu}M)$ and $DPDPE(1{\mu}M)$, $[^3H]diprenorphine$ labeled ${\kappa}$ sites. Competition analysis in both rat and guinea pig cortex has shown a single population of $[^3H]diprenorphine$ binding site with different Kd values, respectively. There is a significant difference in Ki values of (-) WIN44441 and (+)WIN44441 in both rat and guinea pig cortex. Bremazocine, (-)ethylketocyclazocine, (-)cyclazocine, nor-binaltorphimine effectively inhibited the $[^3H]diprenorphine$ binding with different Ki values in rat and guinea pig cortex. U-69,593, U-50,488H and dynorphine-A (1-8) did not inhibit the $[^3H]diprenorphine$ binding in rat but in guinea pig cortex. Nor-binaltorphimine was a ligand discriminate the ${\kappa}_1$, and ${\kappa}_2$ receptor most effectively. We, also, examined the influence of Na ion and $GTP{\gamma}S$, a nonhydrolyzable guanine nucleotide analog, on the inhibition of $[^3H]diprenorphine$ binding by diprenorphine, (-)ethyl-ketocyclazocine, U-69,593 and bremazocine. By the replacement of NaCl with N-methy-D-glucamine or addition of $GTP{\gamma}S$, Ki values of diprenorpnine were not changed and that of ethylketocyclazocine were changed significantly in both rat and guinea pig cortex. The Ki value of bremazocine was decreased by removal of Na ion, and increased by $GTP{\gamma}S$, however, was not changed by any one of either. These results suggest that there are 2 kinds of subtypes of ${\kappa}$ opioid receptor, ${\kappa}_1$, and ${\kappa}_2$, showing different Ki values for various ${\kappa}$ opioid ligands, also, bremazocine possess the antagonistic property at ${\kappa}_2$ site which is dominant subtype of K receptor in rat cortex.

• Journal of KIISE:Information Networking
• /
• v.30 no.3
• /
• pp.293-306
• /
• 2003

In recent years, distributed computing environments have been radically changing to a structure of global, heterogeneous, federative and wide-area systems. This structure's environments consist of a let of objects which are implemented on telecommunication network to provide a wide range of services. Furthermore, all of objects existing on the earth have the duplicated characteristics according to how to categorize their own names or properties. But, the existing naming or trading mechanism has not supported the binding services of duplicated objects, because of deficiency of independent location service. Also, if the duplicated objects which is existing on different nodes provide the same service, it is possible to distribute the client requests considering each system's load. For this reason, we designed and implemented a new model that can not only support the location management of replication objects, but also provide the dynamic binding service of objects located in a system with minimum overload for maintaining load balancing among nodes in wide-area object computing environments. Our model is functionally divided into two parts; one part is to obtain an unique object handle of replicated objects with same property as a naming and trading service, and the other is to search one or more contact addresses by a location service using a given object handle. From a given model mentioned above, we present the procedures for the integrated binding mechanism in design phase, that is, Naming/Trading Service and Location Service. And then, we described in details the architecture of components for Integrated Binding Service implemented. Finally, we showed our implement environment and executing result of our model.

• Macromolecular Research
• /
• v.17 no.4
• /
• pp.259-264
• /
• 2009

Chemical modification of magnetic nanoparticles(MNPs) with functional polymers has recently gained a great deal of attention because of the potential application of MNPs to in vivo and in vitro biotechnology. The potential use of MNPs as capturing agents and sensitive biosensors has been intensively investigated because MNPs exhibit good separation-capability and binding-specificity for biomolecules after suitable surface functionalization processes. In this work, we demonstrate an efficient method for the surface modification of MNPs, by combining surface-initiated polymerization and the subsequent conjugation of the biologically active molecules. The polymeric shells of non-biofouling poly(poly(ethylene glycol) methacrylate)(pPEGMA) were introduced onto the surface of MNPs by surface-initiated, atom transfer radical polymerization(SI-ATRP). With biotin as a model of biologically active compounds, the polymeric shells underwent successful post-functionalization via activation of the polymeric shells and bioconjugation of biotin. The resulting MNP hybrids showed a biospecific binding property for streptavidin and could be separated by magnet capture.

• Journal of the Korea Convergence Society
• /
• v.2 no.3
• /
• pp.1-6
• /
• 2011

Aluminum foam is one of the representative light-weight materials. In this study we analyzed the mechanical properties of the aluminum foam structures. Aluminum materials with pores have novel mechanical characteristics such as flame retardancy, damping, and energy absorption which are superior to those of polymer foam. Furthermore its reusable properties draw considerable interests. General properties, energy and acoustic absorption will be investigated and future research issues such as binding techniques of foam materials with other structures will be discussed through foam application examples.