• 한국염색가공학회지
• /
• 제14권2호
• /
• pp.85-85
• /
• 2002

The interaction between berberine and tannin in aqueous solution was investigated spectrophotometerically. The dyeing mechanism of silk fabrics (control and tannin treated silk fabrics) with berberine was based on thermodynamic parameters obtained from equilibrium adsorption experiments. In adsorption spectra of aqueous solution of berberine and tannin mixture two isosbestic points (328nm, 357nm) were found and the mole fraction of reaction of components was 1:1. Initial dyeing rates were increased and the diffusion of dye was more effective by tannin treatment. Without regard to tannin treatment the adsorption isotherm of berberine was the langmuir type except high temperature, 80℃. By tannin treatment the saturation dye uptake was increased, the increase of dye uptake appeared to be a result of entropy change rather than enthalpy change. All these results can be interpreted by the hydrophobic interaction between berberine and silk treated with tannin and it is reasonable to conclude that not only the ionic force, but also the hydrophobic interaction contributes to the binding of berberine and tannin treated silk treated with tannin.

• 한국염색가공학회지
• /
• 제14권2호
• /
• pp.9-17
• /
• 2002

The interaction between berberine and tannin in aqueous solution was investigated spectrophotometerically. The dyeing mechanism of silk fabrics (control and tannin treated silk fabrics) with berberine was based on thermodynamic parameters obtained from equilibrium adsorption experiments. In adsorption spectra of aqueous solution of berberine and tannin mixture two isosbestic points (328nm, 357nm) were found and the mole fraction of reaction of components was 1:1. Initial dyeing rates were increased and the diffusion of dye was more effective by tannin treatment. Without regard to tannin treatment the adsorption isotherm of berberine was the langmuir type except high temperature, $80^\circ{C}$. By tannin treatment the saturation dye uptake was increased, the increase of dye uptake appeared to be a result of entropy change rather than enthalpy change. All these results can be interpreted by the hydrophobic interaction between berberine and silk treated with tannin and it is reasonable to conclude that not only the ionic force, but also the hydrophobic interaction contributes to the binding of berberine and tannin treated silk treated with tannin.

• 한국축산식품학회:학술대회논문집
• /
• 한국축산식품학회 2005년도 제36차 추계 학술발표대회
• /
• pp.136-141
• /
• 2005

In this research, PSF and PBF indicated beneficial influence on water binding ability of meat comparing to conventional freezing methods. High pressure in freezing process resulted some changes inhysical characteristics of pork: increment each color value, shear force and pH in PSF, PAF and PBF.

• Journal of Preventive Medicine and Public Health
• /
• 제45권6호
• /
• pp.364-373
• /
• 2012

The United Nations Environmental Program Governing Council has regulated mercury as a global pollutant since 2001 and has been preparing the mercury convention, which will have a strongly binding force through Global Mercury Assessment, Global Mercury Partnership Activities, and establishment of the Open-Ended Working Group on Mercury. The European Union maintains an inclusive strategy on risks and contamination of mercury, and has executed the Mercury Export Ban Act since December in 2010. The US Environmental Protection Agency established the Mercury Action Plan (1998) and the Mercury Roadmap (2006) and has proposed systematic mercury management methods to reduce the health risks posed by mercury exposure. Japan, which experienced Minamata disease, aims vigorously at perfection in mercury management in several ways. In Korea, the Ministry of Environment established the Comprehensive Plan and Countermeasures for Mercury Management to prepare for the mercury convention and to reduce risks of mercury to protect public health.

• 한국전기전자재료학회논문지
• /
• 제17권6호
• /
• pp.615-621
• /
• 2004

This paper describes a new constructing method of multifunctional biosensor using many kinds of biomaterials. A metal particle and an array was fabricated by photolithographic. Biomaterials were immobilized on the metal particle. The array and the particles were mixed in a buffer solution, and were arranged by magnetic force interaction and random fluidic self-assembly. A quarter of total Ni dots were covered by the particles. The binding direction of the particles was controllable, and condition of particles was almost with Au surface on top. The particles were successfully arranged on the array. The biomaterial activities were detected by chemiluminescence and electrochemical methods.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 C
• /
• pp.1909-1911
• /
• 2003

This research describes a new constructing method of multifunctional biosensor using many kinds of biomaterials. A metal particle and an array was fabricated by photolithographic. Biomaterials were immobilized on the metal particle. The array and the particles were mixed in a buffer solution, and were arranged by magnetic force interaction and self-assembly. A quarter of total Ni dots were covered by the particles. The binding direction of the particles was controllable, and condition of particles was almost with Au surface on top. The particles were successfully arranged on the array. The biomaterial activities were detected by chemiluminescence and electrochemical methods.

• 항공우주시스템공학회지
• /
• 제15권4호
• /
• pp.1-6
• /
• 2021

The non-explosive holding and release mechanism is used to prevent damage to the mission component caused by explosives when the deployment structure for Cube Satellites is separated. However, among the several types available, the non-explosive holding and release mechanism system using nylon wires depend on the nylon wire knot method and tightening power of the worker. Therefore, in this study, we conducted experiments with the operation of a new holding and release mechanism system by conceptualizing the Boa System Dial, which can provide a constant tightening force regardless of worker proficiency and deploying a imitational solar panel. In this study, the process of binding and unbinding with constant tension was recorded while applying the novel non-explosive holding and release mechanism using the Boa System Dial proposed. In addition, required advances are indicated for the application of the proposed system to actual Cube Satellites.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2009년도 춘계학술발표대회
• /
• pp.1218-1221
• /
• 2009

최근 Internet Engineering Task Force에서 표준화가 된 Proxy Mobile IPv6는 기존의 이동성 보장 프로토콜인 Mobile IPv6가 가지는 많은 문제점을 보완했다. 하지만, Proxy Mobile IPv6에서 같은 Local Mobility Anchor 내에 있고, 다른 Mobile Access Gateway에 있는 Mobile Node 사이의 패킷 전송에 있어서 발생하는 삼각 라우팅 문제는 여전히 존재한다. 이 문제점을 해결하기 위해 최근 Liebsch의 드래프트와 A.Dutta의 드래프트에서 제안된 두 가지의 Route Optimization 기법의 동작 과정을 알아보고, 상호 데이터 전송 상황에서 더 나은 성능을 제공하는 새로운 Route Optimization 기법을 제안한다. 제안한 Route Optimization 기법은 Corresponding Information을 이용하여 Mobile Access Gateway 간 Corresponding Binding을 완료하여, Route Optimization을 설정한다. 제안한 Correspondent Information을 이용한 Route Optimization 기법은 기존의 기법보다 상호 데이터 전송 상황에서 Route Optimization에 필요한 메시지 수가 적기 때문에 시그널링 비용이 감소하였다.

• 대한기계학회논문집A
• /
• 제31권10호
• /
• pp.986-992
• /
• 2007

This paper presents the fabrication and characterization of carbon films pyrolyzed with various photoresists for bioMEMS applications. To verify the usefulness of pyrolyzed carbon films as an electrode material in an electrochemical biosensor developed by the authors, interactions between avidin and biotin on the pyrolyzed carbon film were studied via electrochemical impedance spectroscopy based on electrostatic interactions between avidin and negatively-charged ferricyanide. The pyrolyzed carbon films were characterized using a surface profiler, a precision semiconductor parameter analyzer, a nanoindentor, scanning electron microscopy, and atomic force microscopy. Amine conjugated biotin was immobilized on the electrode using EDC/NHS as crosslinkers after $O_2$ plasma treatment to enhance functional groups on the carbon electrode pyrolyzed at $1000^{\circ}C$ with AZ9260. The detection of avidin binding with different concentrations in a range of 0.75 nM to $7.5\;{\mu}M$ to the pyrolyzed carbon electrode modified with biotin was carried out by measuring the electrochemical impedance change. The results show that avidin binds to the biotin on the electrode not by non-specific interaction but by specific interaction, and that EIS successfully detects this binding event. Pyrolyzed carbon films are a promising material for miniaturization, integration, and low-cost fabrication in electrochemical biosensors.

• 한국대기환경학회지
• /
• 제9권3호
• /
• pp.191-199
• /
• 1993

This paper describes the results of a systematic study to determine the characteristics of particle generated from various types of asbestos containing material(ACM) and manmade fiber material(MMFM) during operations of cutting and grinding in laboratory and workplace. Tests were conducted with a specially designed glove box which allowed complete sampling of the generated asbestos fibers. Specificially, air measurements were made during ACM and MMFM installation in building. All personal air samples collected were identified by polarized light microscopy(PLM), X-ray diffraction(XRD) and scanning electron microscope with energy dispersive X-ray analysis(SEM/EDXA). Also, the samples were counted by phase contrast microscope(PCM) in order to compare the results with the permissible exposure standard for workplace. Results indicate that the characterisitcs of fibers found in the roofing sheet, the ceiling and the wall insulation boards were identical to those of asbestos, while the characteristics of fibers found in the ceiling insulation board, the floor tile and the sprayed on insulation products in parking area were identical to those of asbestos, while the characteristics of fibers found in the ceiling insulation board, the floor tile and the sprayed on insulation products in parking area were identical to those of rock wool. The concentrations of airborne fibers from various building materials cut by a grinder for 5 minutes were in the ranges of 0.09 $\sim$ 1.71 fibers/cc(f/cc). The highest concentration(1.71f/cc) was found during grinding the wall insulation board which also contains rock wool. The airborne fiber concentrations generated by installing at workplace were ranged from 0.0009 to 0.029 f/cc. All asbestos fibers from the ceiling insulation board at workplace were less than 20$\mu$m in length and more than 20% of them had the average aspect ratio greater than 20. Therefore, for the purpose of decreasing asbestos and man-made fiber concentrations at the workplace, the ceiling and wall board should use strong binding material to increase the binding force with fiber. Also, the permissible exposure standard for workplace(2.0f/cc) in Korea should be constituted below the maximum avaiable concentration measured at glove box.