• Journal of Technologic Dentistry
• /
• v.27 no.1
• /
• pp.89-95
• /
• 2005

In the manufacture of ceramo-metal crown, difference of fracture strength according to the metal depth has been known to be an important influence on enough intensity and internal stress to endure an occlusion-pressure as well as aesthetics of rehabilitating similar colour such as natural teeth. Depth of ceramic material could be determined by that of metal in three groups: first case of thin depth, second case of thick depth, and third case of constant depth. For the enhancement of the fracture strength between metal and ceramic materials and aesthetic satisfaction, a study on the bonding force, fracture strength, and aesthetics have been required more. In this study, therefore metal coping were made in three groups of A, B and C by using both ceramic powder of Norithe and metal of Columbium, which have been used primarily in the market. A group was made in $0.2mm\times10mm\times10mm$, B group was made in $0.4mm\times10mm\times10mm$, and, C group was made in $0.8mm\times10mm\times10mm$, respectively. The number of metal coping in each group was 10, and total sample numbers used in this study were 30 metal copings. After these metal coping tissue were in the process of build-up in 1.5mm constant depth of porcelain, firing, and glazing, the fracture strength about each metal coping tissue was investigated using oil press. It was found that the average values of durable occlusion pressure for separation of ceramic material in the porcelain fused to metal crown (PFM) in the each group showed the increasing order of A group (30 bar), B group (42 bar), and C group (44 bar), respectively. Proper depth of metal coping in the PFM was considered to be 0.4mm in the B group because this metal size showed higher durable property to the occlusion pressure and better coupling strength in the ceramo-metal crown.

• Composites Research
• /
• v.31 no.1
• /
• pp.8-11
• /
• 2018

Sheet molding compound (SMC) is one of the most economical fiber reinforced composite fabrication processing for automotive applications. In this study, we studied the optimum formulation for the production of SMC which shows low specific gravity without lowering the mechanical properties by using glass bubble (GB) which is a low specific gravity filler and glass fiber (GF) as a reinforcing material. The tensile strength increased with the increase of the GF in the SMC, and the specific gravity decreased with the increase of the GB. The synergistic effect of improving the mechanical properties as the specific gravity is lowered is found in the optimum formulation. The synergy effect was confirmed by the internal structure analysis that the dispersion effect of the crack propagation of the GB and the improvement of the binding force between the fiber and the matrix due to the incorporation of the GB.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.17
• /
• pp.7-35
• /
• 2002

In many international financing transactions Korean companies are required to issue a guarantee. Thus far, however, legal issues on international guarantees have not been fully discussed in Korea. This is partly because most of the international guarantees are governed by a foreign law such as English law or the laws of the State of New York. In this articles the author examines major concepts or terms and conditions of a typical international guarantee, e.g., language on consideration, primary obligor, joint and several guarantee, unconditional and irrevocable guarantee, continuing guarantee, right of subrogation, representations and warranties, covenant or undertaking, currency indemnity, assignment, participation, governing law and jurisdiction clause, etc. For reference, standard forms of a guarantee and a standby letter of credit are attached to the article. In examining the terms and conditions, the author compares them with similar or equivalent concepts under Korean law. The author further discusses some Korean law issues that may arise under international guarantees governed by a foreign law. These issues include the application of the ultra vires doctrine under Article 34 of the Civil Code of Korea, the validity of an international guarantee which a Korean company has issued in violation of the guarantee ceiling set under Article 10 of the Law on Monopoly Regulation and Fair Trade of Korea and the validity of an international guarantee which a Korean party has issued in violation of the Foreign Exchange Transaction Law. In addition, the author discusses some issues under a so-called independent guarantee and a standby letter of credit. In this regard, reference is made to the Uniform Rules for Demand Guarantee (URDG), International Standby Practices (ISP98) and the Convention on Independent Guarantees and Stand-by Letters of Credit adopted by the United Nations in 1995. Finally, the author examines major terms and conditions of typical comfort letters and discusses some legal issues, such as the binding force of the comfort letter. In dealing with the issues the author underscores that to the extent the issues are not properly dealt with by an international norm such as Uniform Customs and Practice for Documentary Credits or ISP 98, the issues must be analyzed by reference to the governing law of the relevant instrument.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.36 no.2
• /
• pp.60-69
• /
• 2004

Application methods of chemicals were investigated to minimize strength reduction of corrugated boards under the high humidity environment encountered in the cold chain system. Starch insolubilizers were introduced in the starch solution preparation of the Stein hall method and their insolubilization effect of starch binder were estimated. The performance of water repellent agents(WRA) and moisture proof agents(MPA) were evaluated in terms of water and moisture resistance. And effects of the combination of the chemicals and the coating method were also examined. Addition of the polyamine polyamide insolubilizer to the main part in the Stein hall process improved the binding force and water resistance of starch, which contributed to minimize the strength reduction of paper under the high humidity environment. AZC and Glyoxal type insolubilizers could not be used in the experiment due to an excessively increased viscosity of starch solution and the poor stability. Conventional WRA treatment to the base paper enhanced water and moisture resistance very slightly even though water repellency of the paper reached R10 by the treatment. MPA showed excellent performance than WRA not only in water and moisture resistance but in water repellency. Double coating on paper with MPA was more effective than the single coating at the same coating weight. A newly developed MPA showed excellent performance and runnability only by a single coating instead of a double coating.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.105-105
• /
• 2011

ZnO is a promising material since it could be applied to many fields such as solar cells, laser diodes, thin films transistors and gas sensors. ZnO has a wide and direct band gap for about 3.37 eV at room temperature and a high exciton binding energy of 60 meV. In particular, ZnO features high sensitivity to toxic and combustible gas such as CO, NOX, so on. The development of gas sensors to monitor the toxic and combustible gases is imperative due to the concerns for enviromental pollution and the safety requirements for the industry. In this study, we investigated the effect of substrate temperature and post-annealing on structural and electrical properties of ZnO thin films. ZnO thin films were deposited by pulsed laser deposition (PLD) at various temperatures at from room temperature to $600^{\circ}C$. After that, post-annealing were performed at $600^{\circ}C$. To inspect the structural properties of the deposited ZnO thin films, X-ray diffraction (XRD) was carried out. For gas sensors, the morphology of the films is dominant factor since it is deeply related with the film surface area. Therefore, the atomic force microscopy (AFM) and field emission scanning electron microscopy (FE-SEM) were used to observe the surface of the ZnO thin films. Furthermore, we analyzed the electrical properties by using a Hall measurement system.

• Textile Coloration and Finishing
• /
• v.16 no.3
• /
• pp.22-30
• /
• 2004

The polyester fabrics were treated with the chitosan with various solubility in optimized treatment condition. The treatment method was discussed to be a high functional finishing for the polyester fabric to obtain the high moisture absorption and anti-microorganism property by evaluating the effect of the chitosan purification method on the yield and anti-microorganism property of the chitosan. On the other hand, soluble polyurethane was added to the chitosan treatment solution and/or plasma pretreatment was done. The addition of soluble polyurethane give a high add-on ratio as well as a linen like effect of treated polyester fabric. The results were as follows: 1. In the treatment of polyester fabric by the chitosan solution, a soluble PU resin and low temperature plasma treatment were done to obtain high binding force between the fabrics and the chitosan. The add-on rate and the moisture absorption ratio of the fabrics treated with the chitosan-PU after treated with the plasma slightly increased more than those of the fabrics treated with the chitosan only. 2. Anti-static property of the fabrics treated with the chitosan decreased rapidly with increasing of the chitosan concentration. The washing fastness of the fabrics treated with the chitosan-PU after treated with the plasma was better than those of the fabrics treated with chitosan only. The wrinkle resistance of the treated fabrics decreased constantly with the concentration of the chitosan. The bending rigidity of the treated fabrics increased greatly. On the treatment of polyester fabric under optimum condition, the microorganism reduction rate kept above 90％ after 10times launderings. 3. As the polyester fabrics which has flat yam was used as a weft yams were treated with the chitosan-PU as give a functional finishing effects such as durability, moisture absorption, anti-static and anti- microorganism property. Treated polyester fabric showed a good functional finishing effect and a linen like property.

• Korean Chemical Engineering Research
• /
• v.46 no.6
• /
• pp.1081-1086
• /
• 2008

QDs-LEDs(quantum dot light emitting device) should contain well-organized arrays of QDs on an electron transport layer. Thin films of CdSe/ZnS core-shell QDs were successfully fabricated on $TiO_2$ substrates by using PDMS stamp and micro contact printing method. 2-Carboxyethylphosphonic acid(CAPO) and 1,6-hexanedithiol(HDT) were employed as molecular linkers in assembling CdSe/ZnS core-shell QDs with high-density and uniform array. The CAPO increased the binding strength between the QDs and the substrates, and the HDT induced the strong inter-particle attractions of assembled QDs. The assembling properties of QDs thin films were characterized by SEM, AFM, optical microscope and photoluminescence spectroscope(PL).

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.8
• /
• pp.1345-1357
• /
• 2018

Objective: This study examined the influence of dietary supplementation of Nigella sativa seeds, Rosmarinus officinalis leaves and their combination on carcass attributes, fatty acid (FA) composition, gene expression, lipid oxidation and physicochemical properties of longissimus dorsi (LD), semitendinosus (ST), and supraspinatus (SS) muscles in Dorper lambs. Methods: Twenty-four Dorper lambs ($18.68{\pm}0.6kg$, 4 to 5 months old) were randomly assigned to a concentrate mixture containing either, no supplement (control, T1), 1% Rosmarinus officinalis leaves (T2), 1% Nigella sativa seeds (T3), or 1% Rosmarinus officinalis leaves+1% Nigella sativa seeds (T4) on a dry matter basis. The lambs were fed the treatments with urea-treated rice straw for 90 days, slaughtered and the muscles were subjected to a 7 d postmortem chill storage. Results: The T2 lambs had greater (p<0.05) slaughter and cold carcass weights than the control lambs. Dietary supplements did not affect (p>0.05) chill loss, dressing percentage, carcass composition, intramuscular fat and muscle pH in Dorper lambs. Meat from supplemented lambs had lower (p<0.05) cooking and drip losses, shear force, lightness, and lipid oxidation and greater (p<0.05) redness compared with the control meat. The impact of dietary supplements on muscle FA varied with muscle type. Diet had no effect (p>0.05) on the expression of stearoyl-CoA desaturase and lipoprotein lipase genes in LD and ST muscles in Dorper lambs. The T2 and T3 diets up regulated the expression of AMP-activated protein kinase alpha 2 gene in LD and ST muscles and up regulated the expression of sterol regulatory element-binding protein 1 in ST muscle in Dorper lambs. Conclusion: Dietary supplementation of Nigella sativa seeds and Rosmarinus officinalis leaves had beneficial effects on meat quality in Dorper lambs.

• Journal of the Economic Geographical Society of Korea
• /
• v.17 no.4
• /
• pp.801-816
• /
• 2014

This paper is a theoretically grounded empirical study aimed at shedding light on the Triple Helix of University-Industry-Government (U-I-G) relations in biotechnology cluster of Singapore. It questions the issue about the gap between theoretical consideration of the Triple Helix of U-I-G relations and the actual reality in biotechnology cluster, and the experience of Singapore was investigated. In terms of evolutionary perspective, biotechnology cluster in Singapore has gone through ongoing processes from a certain stage to other, and within the processes the Triple Helix nexus has been found. Analysis of the empirical study reveals significant findings: first, the government policies play a critical role in the operation of U-I-G relations rather than universities; second, therefore, the binding force of U-I-G relationships is based on the government policies being comprehensive including researchers immigration, student scholarship for local students, and tax and non-tax incentives for firms, rather than focusing on a targeted policy; third, the role of government starts from an initial stage, and it's role is ongoing processes by supporting infrastructure, human sources and continuous nourishment enabling the triple helix of U-I-G relations.

• Food Science of Animal Resources
• /
• v.34 no.6
• /
• pp.777-783
• /
• 2014

This study investigated the effect of various freezing and thawing techniques on the quality of beef. Meat samples were frozen using natural convection freezing (NF), individual quick freezing (IQF), or cryogenic freezing (CF) techniques, followed by natural convection thawing (NCT) or running water thawing (RT). The meat was frozen until the core temperature reached $-12^{\circ}C$ and then stored at $-24^{\circ}C$, followed by thawing until the temperature reached $5^{\circ}C$. Quality parameters, such as the pH, water binding properties, CIE color, shear force, and microstructure of the beef were elucidated. Although the freezing and thawing combinations did not cause remarkable changes in the quality parameters, rapid freezing, in the order of CF, IQF, and NF, was found to minimize the quality deterioration. In the case of thawing methods, NCT was better than RT and the meat quality was influence on the thawing temperature rather than the thawing rate. Although the microstructure of the frozen beef exhibited an excessive loss of integrity after the freezing and thawing, it did not cause any remarkable change in the beef quality. Taken together, these results demonstrate that CF and NCT form the best combination for beef processing; however, IQF and NCT may have practical applications in the frozen food industry.