• 대한치과교정학회지
• /
• 제20권2호
• /
• pp.409-417
• /
• 1990

Tooth movement would be impeded by frictional force arised between archwire and tube, bracket or elastics in the fixed orthodontic appliances, which could be changed variably by such several factors as the contact area, normal (perpendicular) force and the condition of contact surface. There were many literatures about frictional force in the orthodontic region, but different results were obtained from little controlled research so that was very difficult in clinical application. Therefore we have reviewed comprehensively previous literatures about frictional force and thus several results were obtained as follows: 1. For use species of the orthodontic wire, frictional force was influenced mainly by surface roughness of wire in the absence of binding, while that was influenced mainly by normal force in high binding angulation. 2. For the cross-section and diameter of the wire, the contact area influenced mainly on frictional force in the absence of binding, while wire stiffness influenced mainly on frictional force in high binding angulation. 3. The greater the bracket width, the greater frictional force, and frictional force of the plastic bracket was larger than that of the metal bracket. 4. For ligation type, frictional force of the stainless steel ligation was larger than that of the elastic ligation, and frictional force was directly proportional to ligation force. 5. Variable frictional force were occured from the saliva combined with such another factors as normal force and mode of surface oxide et al.

• 한국식품위생안전성학회지
• /
• 제7권2호
• /
• pp.77-82
• /
• 1992

천연색소 Brazilin 및 Hematoxylin의 BSA에 대한 결합 특성을 fluorescence probe 법을 이용하여 측정하였다. Brazilin 및 Hematoxylin은 BSA에 대해 강한 결합 친화력을 보였으며 Hematoxylin은 Brazilin 보다 더 강한 결합력을 보였다. Brazilin 및 Hematoxylin의 농도 증가에 따라 결합상수는 감소하였으며, 이는 probe-단백 결합체와 양화합물간의 상호작용 또는 Probe와 양화합물간의 결합체 형성에 기인하는 것으로 추정되었다. 양화합물과 BSA의 결합은 pH 및 이온강도에 의존적이었으며, 이 결합에는 electrostatic force 및 hydrophobic force 가 관여하는 것으로 추정되었다.

• Bulletin of the Korean Chemical Society
• /
• 제33권11호
• /
• pp.3597-3600
• /
• 2012

Thrombin binding aptamter (TBA-15) is a 15-mer guanine-rich oligonucleotide. This DNA apamer specifically binds to the thrombin protein involved in blood coagulation. Using extensive umbrella sampling molecular dynamics simulation method at all atom level, we investigated the potential of mean force (PMF) upon pulling the DNA aptamer from the binding mode of aptamer/thrombin complex. From this calculation, the free energy cost for a full dissociation of this aptamer/protein complex is 17 kcal/mol, indicating a substantial binding affinity of TBA-15. Interestingly, this PMF reveals noticeable plateau regions along the pulling coordinate. Possible structural changes of this complex in the plateau were investigated in details.

• Applied Microscopy
• /
• 제51권
• /
• pp.17.1-17.10
• /
• 2021

Our previous study on the binding activity between Cel5H and clay minerals showed highest binding efficiency among other cellulase enzymes cloned. Here, based on previous studies, we hypothesized that the positive amino acids on the surface of Cel5H protein may play an important role in binding to clay surfaces. To examine this, protein sequences of Bacillus licheniformis Cel5H (BlCel5H) and Paenibacillus polymyxa Cel5A (PpCel5A) were analyzed and then selected amino acids were mutated. These mutated proteins were investigated for binding activity and force measurement via atomic force microscopy (AFM). A total of seven amino acids which are only present in BlCel5H but not in PpCel5A were selected for mutational studies and the positive residues which are present in both were omitted. Of the seven selected surface lysine residues, only three mutants K196A(M2), K54A(M3) and K157T(M4) showed 12%, 7% and 8% less clay mineral binding ability, respectively compared with wild-type. The probable reason why other mutants did not show altered binding efficiency might be due to relative location of amino acids on the protein surface. Meanwhile, measurement of adhesion forces on mica sheets showed a well-defined maximum at 69±19 pN for wild-type, 58±19 pN for M2, 53±19 pN for M3, and 49±19 pN for M4 proteins. Hence, our results demonstrated that relative location of surface amino acids of Cel5H protein especially positive charged amino acids are important in the process of clay mineral-protein binding interaction through electrostatic exchange of charges.

• 한국정밀공학회지
• /
• 제14권8호
• /
• pp.29-39
• /
• 1997

The clamp, as the structure which is used for supporting the pipe in the atomic power plant, is produced with a certain degree of anticlastic curvature in the current manufacturing process. In this study, the structural analysis of the clamp and the pipe was performed using ABAQUS. And the finite element modelling for the analysis was made by an HyperMesh. The contact forces which are transferred between the clamp and the pipe for the external force are changed according to the binding force of bolts and keeps the clamp tightly and protects the slipping between the clamp and the pipe. The clamps with the anticlastic curvature and with the flat curvature are considered in order to invest the anticlastic effect. In this study, another case is suggested. The present case does not have the stiffness ring on the end of the clamp but the suggested case has the ring. For the present case, the results showed that the equivalent stress is higher in the anticlastic curvature case than in the flat curvature case and the equivalent stresses on the pipe are almost the same as the binding force increses. For the suggested case, the result showed that the equivalent stress in the anticlastic curvature case decreases until some binding force and increases as the binding forces increase and is lower in some range than in the flat curvature case. From this study, the clamp with the anticlastic curvature in the suggested method is better than the clamp with the flat curvature and the optimal binding force are given.

• 정보처리학회논문지C
• /
• 제13C권3호
• /
• pp.267-274
• /
• 2006

MIPv6에서 경로 최적화를 제공하기 위한 바인딩 갱신은 다양한 공격에 취약할 수 있다. 따라서, 안전한 바인딩 갱신이 MIPv6의 중요한 연구 과제가 되었으며, 이를 위한 여러 프로토콜들이 제안되었다. 본 연구에서는 기존의 여러 바인딩 갱신 프로토콜들의 특성을 비교 분석하고, 그 중에서 보안성 및 성능에서 우수한 평가를 받는 SUCV 프로토콜에 대한 공격 취약점과 관리의 문제점을 제시하고, 이를 해결할 수 있는 개선된 바인딩 갱신 프로토콜을 제안한다. 또한, 상세한 분석을 통해 제안 프로토콜이 SUCV 프로토콜이 갖는 redirect 공격, DoS 공격 및 brute force 공격에 대한 취약성과 관리적 문제점을 개선하고 MN의 연산 부하를 감소시킴을 제시한다.

• Applied Biological Chemistry
• /
• 제1권
• /
• pp.48-54
• /
• 1960

5-Iodopyrimidines와 Human serum albumin 간(間)의 결합(結合)에 있어 이들의 결합량(結合量)은 첫째 5-Iodopyrimidines 분자내(分子內) Iodine에 대(對)한 Introducing group이 변(變)함에 따라 변(變)하게 된다. 다시 말해서 결합량(結合量)은 5-Iodopyrimidines 분자내(分子內) 보다 강(强)한 electron donating group이 존재(存在) 함에 따라 한층 더 증가하게 된다고 말할 수 있다. 둘째 이들 두 물질간(物質間)의 결합량(結合量)은 또한 PH 증가에 따라서도 증가한다고 말할 수 있는데 이는 PH 증가에 따라 Human serum albumin 분자자체내(分子自體內)의 Configuration이 변(變)하게 됨으로서 분자내(分子內) electrostatic repulsion에 의(依)한 새로운 결합부분(結合部分)이 증가될 것이며, 이 부분(部分)에서의 복합체(復合體)를 형성(形成)함에 기인(基因)한다고 생각된다. 이러한 실험적(實驗的) 결과(結果)를 토대로 하여 5-Iodopyrimidines가 antithyroid action과 어떠한 관계(關係)를 갖고 있는가의 실험(實驗)을 함으로서 결합량(結合量)에 따른 antithyroid activity 서열(序列)을 결정(決定)할 수도 있을 것이다.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권8호
• /
• pp.1046-1053
• /
• 1999

The musculotendon model is presented to show the declines in muscle force and shortening velocity during muscle fatigue due to the repeated functional electrical stimulation (FES). It consists of the nonlinear activation and contraction dynamics including physiological concepts of muscle fatigue. The activation dynamics represents $Ca^{2+}$ binding and unbinding mechanism with troponins of cross-bridges in sarcoplasm. It has the constant binding rate or activation time constant and two step nonlinear unbinding rate or inactivation time constant. The contraction dynamics is the modified Hill type model to represent muscle force - length and muscle force - velocity relations. A muscle fatigue profile as a function of the intracellular acidification, pH is applied into the contraction dynamics to represent the force decline. The computer simulation shows that muscle force and shortening velocity decline in stimulation time. And we validate the model. The model can predicts the proper muscle force without changing its parameters even when existing the estimation errors of the optimal fiber length. The change in the estimate of the optimal fiber length has an effect only on muscle time constant in transient period not on the tetanic force in the steady-state and relaxation periods.

• 한국진공학회지
• /
• 제1권1호
• /
• pp.83-87
• /
• 1992

최근 Angle Resolved Ultraviolet Photoemission Spectroscopy(ARUPS)를 통하여 Mo(011)과 W(011)의 surface Fermi contour에 관한 연구가 발표되었다. Hydrogen 흡착시 W(011)의 electron contour는 팽창하였다. 이것은 electron contour를 이루는 surface state가 hydrogen 흡착시 higher binding energy로 이동한 결과이다. Surface state의 higher binding energy로의 이동은 결국 band flattening으로 이해되며, 이 band flattening 에 S.E.Trullinger의 long range dipole dipole force와 Kohn anomaly 현상을 부합시켜 W(011) surface에 수소 흡착시 일어나는 reconstruction 현상에 대한 설명을 시도해 보았다.

• 펄프종이기술
• /
• 제34권1호
• /
• pp.22-29
• /
• 2002

The coated paper was greatly affected by the basic physical properties of the binder as well as the amount of the coating formula. High glass transition temperature (Tg) of the styrene-butadiene (SB) latex, selected as the binder in our study, gave the high stiffness to the coated paper, but lowered the binding force and print gloss. The average particle size of the SB latex also greatly affected to the coated paper so that the smaller particle size improved the rheological property of the coating formula and increased the binding force and print gloss. Another property of the SBR latex, gel content, was important because when its value was small, the latex was easily deformed at the high temperature and increased air permeability to the coated paper. Therefore, the lower gel content consequently resulted in the higher blistering resistance, especially in the web paper. The larger portion of the SB latex in the coated formula improved the binding force and print gloss, but decreased the ink set-off and ink-trapping to the coated paper. The heavier coating improved optical properties such as opacity, paper gloss and paper smoothness, to the coated paper.