• Bulletin of the Korean Chemical Society
• /
• 제12권4호
• /
• pp.403-406
• /
• 1991

Light scattering phenomena are discussed for a nonpolar binary liquid mixture composed of an optically active solute and an optically nonactive solvent in the critical region, using the Fisher theory. Comparing them with those in the case that the Ornstein-Zernike theory is satisfied, the appropriate analytic results are obtained and discussed.

• Asian-Australasian Journal of Animal Sciences
• /
• 제24권3호
• /
• pp.344-350
• /
• 2011

Kura clover (Trifolium ambiguum M. Bieb.) is a potentially useful perennial legume because of its excellent nutritive value and persistence under environmental extremes. However, information about forage quality of kura clover - grass mixtures adapted to the North-Central USA is limited. Objectives of this research were to determine forage nutritional value of kura clover-grass mixtures under different harvest frequency and cutting height regimes. 'Rhizo' kura clover was grown alone and in binary mixtures with 'Park' Kentucky bluegrass (Poa pratensis L.), 'Comet' orchardgrass (Dactylis glomerata L.), and 'Badger' smooth bromegrass (Bromus inermis Leyss.) at the Arlington Agricultural Research Station located near Madison, WI. Three harvest frequencies ($3{\times}$, $4{\times}$, or $5{\times}$ annually) and two cutting heights (4- or 10-cm) were imposed on each binary mixture and on kura clover grown alone. Higher nutritive value was observed in the binary mixtures with more frequent harvest and lower cutting height. Averaged over 3 years and all harvest frequency and cutting height treatments, the nutritive value of the Kentucky bluegrass and smooth bromegrass mixtures was superior to that of the orchardgrass mixture ($410\;g\;kg^{-1}$ NDF and $194\;g\;kg^{-1}$ CP in the Kentucky bluegrass mixture; $405\;g\;kg^{-1}$ NDF and $188\;g\;kg^{-1}$ CP in the smooth bromegrass mixture; $435\;g\;kg^{-1}$ NDF and $175\;g\;kg^{-1}$ CP in the orchardgrass mixture). All of the mixtures and harvest management systems evaluated in this study produced forage with quality equivalent to "grade one" alfalfa hay and suitable for highproducing livestock, even though the highest quality was observed in the Kentucky bluegrass mixture with $5{\times}$ harvesting at the shorter cutting height.

• 설비공학논문집
• /
• 제5권2호
• /
• pp.111-121
• /
• 1993

Double-diffusive convection during solidification process of the binary mixture was studied numerically. Enthalpy method and finite element method were implemented in the analysis. Calculation carried out for $R{\alpha}_T=10^3-10^4$ and $R{\alpha}_T=0-10^5$. The results show that the variation of thermal Rayleigh number changes the fields of velocity, temperature and concentration, but the variation of solutal Rayleigh number gives little effects on those. In conclusion, concentration gradient can be negligible compared with temperature gradient in macroscopic point of view, although concentration gradient plays a role in forming dendrite.

• Korean Chemical Engineering Research
• /
• 제56권5호
• /
• pp.732-737
• /
• 2018

Experimental data of phase equilibria are reported for the binary mixture of 1-phenyl-2-pyrrolidone in supercritical carbon dioxide. Phase behavior data was measured in a synthetic method at a temperature ranging from 333.2 to 393.2 K and at pressures up to 97.14 MPa. The solubility of 1-phenyl-2-pyrrolidone in the carbon dioxide + 1-phenyl-2-pyrrolidone system increased as temperature increased at a constant pressure and it exhibited the type-I phase behavior. The experimental data for the binary mixture were correlated with the Peng-Robinson equation of state using mixing rule and the critical properties of 1-phenyl-2-pyrrolidone were predicted with the Joback and Lyderson method.

• 대한화학회지
• /
• 제48권3호
• /
• pp.243-248
• /
• 2004

실제 기체 및 dense gas나 액체영역까지 영역의 점성까지 두루 점성 계산에 성공적이었던 brake 점성이론을 사용하여 이성분기체의 점성을 계산하였다. Adjustable parameter가 없었으나 낮은 압력에서는 물론 고압하에서도 계산된 값은 실험치와 잘 일치하였다. Redlich-Kwong 방정식을 사용하여 점성에 관한 대응상태방정식을 구성할 수 있었으며 이로부터 초임계유체의 다양한 공업적 활용가능성을 기대할 수 있게 되었다.

• Macromolecular Research
• /
• 제11권5호
• /
• pp.303-310
• /
• 2003

The phase behavior of binary blends of dimethylpolycarbonate-tetramethyl polycarbonate (DMPCTMPC) copolycarbonates and styrene-acrylonitrile (SAN) copolymers has been examined and then compared with that of DMPC/TMPC/SAN ternary blends having the same chemical components and compositions except that the DMPC and TMPC were present in the form of homopolymers. Both binary and ternary blends were miscible at certain blends compositions, and the miscible blends showed the LCST-type phase behavior or did not phase separated until thermal degradation temperature. The miscible region of binary blends is wider than that of the corresponding ternary blends. Furthermore, the phase-separation temperatures of miscible binary blends are higher than those of miscible ternary blends at the same chemical compositions. To explain the destabilization of polymer mixture with the increase of the number of component, interaction energies of binary pairs involved in these blends were calculated from the phase separation temperatures using lattice-fluid theory and then the phase stability conditions for the polymer mixture was analyzed with volume fluctuation thermodynamics.

• 대한화학회지
• /
• 제37권6호
• /
• pp.562-569
• /
• 1993

Dimethyldodecylamine Oxide(DDAO)의 미셀화에 대한 pH 효과와 n-프로판올 효과를 조사하기위하여 유사상태분리모델(pseudophase separation model)을 이용하였다. DDAO는 양성자화된 양이온 계면활성제와 비산성화된 중성 계면활성제 두 종류로 존재할 수 있으며, 이들은 열역학적으로 이성분 혼합메셀을 형성할 수 있다. 각 성분의 조성은 용액의 pH에 따라 달라지며, 각 종류 계면활성제들의 활동도, 미셀상태의 조성, 단량체상태의 조성 및 pH에 따른 임계미셀농도를 유사상태분리이론을 이용하여 실험적인 DDAO의 적정곡선으로부터 계산하였다. 임계미셀농도와 DDAO의 산-염기 해리평형상수($K_a$)는 미셀상태의 조성에 따라 변하였으며, 이들은 pH가 5인 지점에서 최소점 현상을 보이고 있다. 그리고 n-프로판올을 첨가하므로써 DDAO의 임계미셀농도는 감소하였으며, n-프로판올의 농도가 증가할수록 임계미셀농도는 더욱 감소하였다.

• Journal of the Korean Statistical Society
• /
• 제29권4호
• /
• pp.407-422
• /
• 2000

This article is concerned with the selecting predictor variables to be included in building a class of binary response t-link regression models where both probit and logistic regression models can e approximately taken as members of the class. It is based on a modification of the stochastic search variable selection method(SSVS), intended to propose and develop a Bayesian procedure that used probabilistic considerations for selecting promising subsets of predictor variables. The procedure reformulates the binary response t-link regression setup in a hierarchical truncated normal mixture model by introducing a set of hyperparameters that will be used to identify subset choices. In this setup, the most promising subset of predictors can be identified as that with highest posterior probability in the marginal posterior distribution of the hyperparameters. To highlight the merit of the procedure, an illustrative numerical example is given.

• 대한기계학회논문집B
• /
• 제20권12호
• /
• pp.3926-3937
• /
• 1996

In recent years there has been increased interest in the continuum model associated with the solidification of binary mixtures. A review of the literature, however, shows that the model verification was not sufficient or only qualitative. Present work is conducted for the reassessment of continuum model on the solidification problems of binary mixtures widely used for model validation. In spite of using the same continuum model, the results do not agree well with those of Incropera and co-workers which are benchmark problems typically used for validation of binary mixture solidification. Inferring from the agreement of present results with the analytic, experimental and other model's numerical results, this discrepancy seems to be caused by numerical errors in applying continuum model developed by Incropera and co-workers, not by the model itself. Careful examination should be preceded before selecting validation problems.

• 대한기계학회논문집B
• /
• 제24권9호
• /
• pp.1239-1246
• /
• 2000

The objective of this work is to measure space and time resolved wall heat fluxes during nucleate pool boiling of R113/R11 mixtures using a microscale heater array in conjunction with a high speed CCD. The microscale heater array is constructed using VLSI techniques, and consists of 96 serpentine platinum resistance heaters on a transparent quartz substrate. Electronic feedback circuits are used to keep the temperature of each heater at a specified temperature and the variation in heating power required to keep the temperature constant is measured. Heat flux data around an isolated bubble are obtained with triggered CCD images. CCD images are obtained at a rate of 1000frames/second. The heat transfer variation vs. time on the heaters directly around the nucleation site is plotted and correlated with images of the bubble obtainedby using the high speed CCD. For both of the mixture(R11/R113) and pure system(pure R11, pure R113), the wall heat fluxes are presented and compared to find out the qualitative difference between pure and binary mixture nucleate boiling.