• Journal of the Korean Society for Heat Treatment
• /
• v.14 no.2
• /
• pp.89-95
• /
• 2001

The 7175Al alloy is particularly interesting for its high strength and sufficient ductility, fracture toughness and corrosion resistance. Currently vigorous efforts have been made to develop large rockets usable for various purposes in the space. This has created the demand of big size of 7175Al billet which would be applied to heavy forgings. The aim of this study is to investigate the quality level of big billet and the effect of billet size on the mechanical properties of large 7175Al ring roll forgings. The billets range from 370 mm to 720 mm in diameter were homogenized and forged after direct chill casting. The size and volume fraction of second phase particles In ${\Phi}720$ mm billet are larger than those of ${\Phi}370$ mm billet, and its ductility is lower for the condition of homogenization and T6 treatment. The Cu-rich phases formed in interdendritic sites are considered to provide the preferential crack path during cold upsetting. The fracture toughness of ring roll forgings which are made by ${\Phi}370$ mm billet is higher than those of ${\Phi}720$ mm billet.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.2309-2318
• /
• 2010

It is a plan the government increases a railroad section SOC investment, and to activate railroad construction while a railroad wins the spotlight with green transportation. But an error of the demand forecast that is a base of a railroad investment evaluation follows in occurring big, there is it with an operation with an obstacle of a railroad investment. Case of the Incheon International Airport Railroad which went into operation recently, While a present transportation demand showed about 10% than a demand forecasted in a past conference, it was magnified in a social problem. A lot of research was gone on in road project about traffic demand forecast and error, a study to find out the error cause is an insufficient situation although errors of a railroad occurs big. So, this study looked for errors and causes about trip generation model and modes sharing model of railroad demand forecast but it was defined causes so that it can occur similar problems in the future. Especially it investigated causes after comparing rate of development plan for the realization and O/D size in trip generation model and after comparing rate of modes sharing of past and current and conducting a survey for airport users. In conclusion, it suggested method to reduce errors of railroad demand forecasting in the future.

• International Journal of Advanced Culture Technology
• /
• v.6 no.4
• /
• pp.58-64
• /
• 2018

The Extraposition phenomenon in English has been analyzed mainly through two approaches: a derivational approach under the Principles & Parameters framework (P&P) and a representational approach under the early Minimalist framework (MP). The first one tries to understand the phenomenon as a result of the movement of a Big Subject first to the end of a sentence which is then followed by the insertion of an expletive 'it' to the empty Subject position. On the other hand, the second one tries to understand it by way of assuming a Big Subject originally base-generated at the end of a sentence which is followed by the insertion of an expletive 'it' to the empty Subject position. The two approaches, however, are not free from theoretical defects at all: the full derivational approach was under controversy in terms of (1) the failure of the Binding Theory and (2) its inability to suggest anything about the marginal reading issue. On the while, the representational approach has been argued (1) to violate the thematic hierarchy that should be kept in D-structure, and (2) to be also unable to suggest the slightest difference in marginal reading issue as the first one. In this paper I focus mainly on analyzing the 'It'-Extraposition phenomenon in the Optimality Theory. I will show that by way of (i) some newly developed constraints such as Subj., and AHSubj. and (ii) a constraint hierarchy of Subj.>>AHSubj., the controversies of 'It-Extraposition' such as (1) the analysis of construction and (2) the very closely related issue of 'marginal reading issue' can be explained properly.

• Journal of KIISE
• /
• v.43 no.5
• /
• pp.524-530
• /
• 2016

The desire to access data faster and the growth of next-generation memories such as non-volatile memories, contribute to the development of research on memory file systems. It is recommended that memory mapped file I/O, which has less overhead than read-write I/O, is utilized in a high-performance memory file system. Memory mapped file I/O, however, brings a page table overhead, which becomes one of the big overheads that needs to be resolved in the entire file I/O performance. We find that same overheads occur unnecessarily, because a page table of a file is removed whenever a file is opened after being closed. To remove the duplicated overhead, we propose the mapping cache, a technique that does not delete a page table of a file but saves the page table to be reused when the mapping of the file is released. We demonstrate that mapping cache improves the performance of traditional file I/O by 2.8x and web server performance by 12%.

• Proceedings of the KIEE Conference
• /
• 2005.11a
• /
• pp.145-147
• /
• 2005

In present, most of metallic structures(gas pipeline, oil pipeline, water pipeline, etc) are running parallel with subway and power line in seoul. Moreover subway system and power line make a stray current due to electrical corrosion on metallic structures. The owner of metallic structures has a burden of responsibility for the protection of corrosion and the prevention against big accident such as gas explosion or soil pollution and so on. So, they have to measure and analyze the data about P/S(Pipe to Soil) potential due to stray current of subway system. So, we have developed the Real-time Wireless Remote Monitoring System for Stray Current of Subway System. In this system, the permanent buried type reference electrode is necessary. In this paper, results of development of buried type reference electrode using porous ceramic$({\alpha}-Al_{2}O_{3})$ are presented.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.1
• /
• pp.49.2-49.2
• /
• 2011

To investigate whether radio galaxies have systematically different accretion disk compared to radio-quiet AGN, we obtained high quality optical spectra for a sample of 22 young radio galaxies, using the KAST Double Spectrograph at the Lick 3-m telescope. Young radio galaxies are particularly useful since the age of the radio phenomena is comparable to that of accretion disk. Based on the optical emission-line diagnostics of narrow line region, which is thought to be photoionized by the nuclear radiation, we constrain the states of the accretion disk. In addition to strong emission lines, i.e., [O I], [O II], [O III], and [Ne III], we use the [Ar III] line to break the degeneracy between the ionization parameter and the SED shape. We find that young radio galaxies show systematically different emission line ratios compared to radio-quiet Type II AGN, suggesting that young radio galaxies probably have the power-law SED without a strong big blue bump. We will present the main results of the emission-line diagnostics.

• Advances in Computational Design
• /
• v.7 no.2
• /
• pp.129-137
• /
• 2022

Compo-casting method is one of the popular technique to produce metal based matrix composites. But, one of the main challenges in this process is un-uniform spreading of reinforced subdivisions (particles) inside the metallic matrix and the lack of desirable mechanical properties of the final produced composites due to the low bonding strength among the metal matrix and reinforcement particles. To remove these difficulties and to promote the mechanical properties of these kind of composites, the WARM ARB technique was utilized as supplementary technique to heighten the mechanical and microstructural evolution of the casted Al/Al₂O₃ composite strips. The microstructure evolution and mechanical properties of these composites have been considered versus different WARM ARB cycles by tensile test, average Vickers micro hardness test, wear test and scanning electron microscopy (SEM). The SEM results revealed that during the higher warm- ARB cycles, big alumina clusters are broken and make a uniform distribution of alumina particles. It was shown that cumulating the forming cycles improved the mechanical properties of composites. In general, combined compo-casting and ARB process would consent making Al/Al₂O₃ composites with high consistency, good microstructural and mechanical properties.

• Journal of Environmental Health Sciences
• /
• v.20 no.1
• /
• pp.62-67
• /
• 1994

Introduction : Recently, water and environmental pollution becomes serious social problem and high technology makes this pollution accelerate. Hydrogen sulfide, the main subject of our research, is one of the most dangerous air pollutant like SO$_x$ and NO$_x$. The major contaminant in coal gasification is H$_2$S, which is very toxic, hazardous and extremely corrosive. Therefore, control of hydrogen sulfide to a safe level is essential. Although commercial desulfurization process called liquid scrubbing is effective for removal of H$_2$S, it has drawbacks, the loss of sensible heat of the gas and costly wastewater treatment. Many investigations are carried out about high-temperature removal ol H$_2$S in hot coal-derived gas using metal oxide or mixed metal qxide sorbents. It was reported that ZnO was very effective sorbent for H2S removal, but it has big flaw to vaporize elemental zinc above 600\ulcorner \ulcorner As alternative, metal oxides such as CaO, $Fe_2O_3$, TiO$_2$ and CuO were added to ZnO. Especially, different results are reported for $Fe_2O_3$ additive. Tamhankar et al. reported SiO$_2$ with 45 wt% $Fe_2O_3$ sorbent is favorable for removal of H$_2$S and regeneration.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.23 no.2
• /
• pp.101-110
• /
• 2023

Background: Dentists make various efforts to reduce patients' anxiety and fear associated with dental treatment. Dental sedation is an advanced method that dentists can perform to reduce patients' anxiety and fear and provide effective dental treatment. However, dental sedation is different from general dental treatment and requires separate learning, and if done incorrectly, can lead to serious complications. Therefore, sedation is performed by a limited number of dentists who have received specific training. This study aimed to investigate the proportion of dentists who practice sedation and the main sedatives they use in the context of the Republic of Korea. Methods: We used the customized health information data provided by the Korean National Health Insurance. We investigated the number of dental hospitals or clinics that claimed insurance for eight main sedatives commonly used in dental sedation from January, 2007 to September, 2019 at the Health Insurance Review and Assessment Service. We also identified the changes in the number of dental medical institutions by region and year and analyzed the number and proportion of dental medical institutions prescribing each sedative. Results: In 2007, 302 dental hospitals prescribed sedatives, and the number increased to 613 in 2019. In 2007, approximately 2.18% of the total 13,796 dental institutions prescribed sedatives, increasing to 3.31% in 2019. In 2007, 168 institutions (55.6%) prescribed N₂O alone, and in 2019, 510 institutions (83.1%) made claims for it. In 2007, 76 (25.1%) hospitals made claims for chloral hydrate, but the number gradually decreased, with only 29 hospitals (4.7%) prescribing it in 2019. Hospitals that prescribed a combination of N₂O, chloral hydrate, and hydroxyzine increased from 27 (8.9%) in 2007 to 51 (9%) in 2017 but decreased to 38 (6.1%) in 2019. The use of a combination of N₂O and midazolam increased from 20 hospitals (6.6%) in 2007 to 51 hospitals (8.3%) in 2019. Conclusion: While there is a critical limitation to the investigation of dental hospitals performing sedation using insurance claims data, namely exclusion of dental clinics providing non-insured treatments, we found that in 2019, approximately 3.31% of the dental clinics were practicing sedation and that N₂O was the most commonly prescribed sedative.

• Journal of KIISE
• /
• v.43 no.11
• /
• pp.1216-1222
• /
• 2016

The advent of large-scale web services has resulted in gradual increase in the amount of data used in those services. These big data are managed efficiently by DBMS such as MySQL and MariaDB, which use InnoDB engine as their storage engine, since InnoDB guarantees ACID and is suitable for handling large-scale data. To improve I/O performance, InnoDB caches data and index of its database through a buffer pool. It also supports multiple buffer pools to mitigate lock contentions. However, the multiple buffer pool scheme leads to the additional data consistency overhead. In this paper, we analyze the overhead of the multiple buffer pool scheme. In our experimental results, although multiple buffer pool scheme mitigates the lock contention by up to 46.3%, throughput of DMBS is significantly degraded by up to 50.6% due to increased disk I/O and fsync calls.