• Asian Journal of Atmospheric Environment
• /
• v.7 no.3
• /
• pp.152-160
• /
• 2013

Seven potentially harmful bifunctional carbonyls were measured in particulate and gaseous phases at a roadside site and a suburban site in an area about 30 km north-northwest from Tokyo metropolitan area in the Kanto region in Japan. For the first time, these compounds were measured in both phases with a time resolution of 2 h. We found that wind direction is an important parameter that affects the collection of these compounds near the source, and it can cover the effects of other important variables. Our results confirmed that motor vehicles and especially diesel fuelled vehicles are important sources of these compounds. Photochemical generation is also an important source of these compounds in the gaseous phase. Transportation from the urban area is also important, particularly in the aerosol phase.

• Bulletin of the Korean Chemical Society
• /
• v.22 no.11
• /
• pp.1207-1212
• /
• 2001

A new photochemically bifunctional epoxy and dimethacrylate compounds were synthesized for investigating the photosensitivity under UV irradiation. Photosensitivity of the synthesized chalcone-based compounds was investigated by using UV-visible absorption and Fourier transformed infrared (FT-IR) spectroscopies. The result of spectroscopic analysis substantiated that the two chalcone-based compounds have functions of both photocrosslinking and photopolymerization by UV exposure in the presence of photoinitiator. Two kinds of photochemical reactions proceeded competitively during UV exposure. Particularly, we studied the effect of photopolymerization on the rate of photocrosslink due to cycloaddition in the two oligomeric compounds.

• Journal of the Korean Chemical Society
• /
• v.57 no.6
• /
• pp.731-737
• /
• 2013

A convenient synthesis of bifunctional sulfonamide-amide derivatives was reported. Amide coupling of 4-methyl benzoic acid 1 followed by reaction with chlorosulfonic acid produce ethyl-4-(3-(chlorosulfonyl)-4-methylbenzoyl)piperazine-1-carboxylate 4. The resulted compound on further treatment with various anilines produces the title sulfonamide-amide derivatives 5a-n. The configurations of these compounds were established by elemental analysis, IR, $^1H$ NMR, mass spectra, and by their preparation from the corresponding 4-methyl benzoic acid 1 and chlorosulfonic acid. All these new compounds demonstrate significant in vitro antibacterial and antifungal activities against all bacterial and fungal strains.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.6
• /
• pp.1727-1734
• /
• 2013

Synthesis and characterization of some novel symmetric bis-azospiropyrans are reported in this study. These bis-azospiropyrans are bifunctional chromophores with two spiropyrans linked by a bis-azo extended aromatic system that produce more color strength (large molar absorption coefficient in mero forms) due to appending two azospiropyran chromophores on one molecule. Comparing to the molar absorption coefficients of the conventional spiropyran chromophores (${\varepsilon}=0.31{\times}10^4\;M^{-1}{\cdot}cm^{-1}$) and mono-azospiropyran chromophores ($1.35{\times}10^4\;M^{-1}{\cdot}cm^{-1}$), the novel synthesized photochromes showed astonishingly increased molar absorption coefficients ($2.3-3.8{\times}10^4\;M^{-1}{\cdot}cm^{-1}$) at the same conditions. Such high molar absorption coefficients confers high sensitivity to light and more color intensity of mero form, that leads to improvement of their light sensitivity and better discrimination of spiro (OFF) form from mero (ON) ones in molecular switches. The structures were deduced from their MS, FT-IR, and $^1H$-NMR spectroscopic data and CHN analysis. All the synthesized photochemically bifunctional compounds revealed fluorescent emission in their colorless form which was faded out after exposing to UV light. Fluorescence quantum yield values of the mero forms were 0.25-0.81 and two high fluorescence quantum yield values (0.60 and 0.81) were found in these series.

• Carbon letters
• /
• v.10 no.3
• /
• pp.190-197
• /
• 2009

Various silanes, amino silane, vinyl silane, sulfur silane (TESPD), and ZS (TESPD/zinc soap complex), are added into chlorinated isobutylene-isoprene copolymer (CIIR)/soft clay/carbon black (CB) and CIIR/hard clay/CB compounds and they are investigated with respect to the vulcanization characteristics, the processability, and the mechanical properties. Comparing hard clay and soft clay filled compounds, hard clay (Suprex) filled system shows a higher die C tear than the soft clay (GK) filled one. The other properties (Mooney, extrusion torque/pressure, torque rise ($M_H-M_L$), modulus at 300%) are close to each other. Among various silanes, the ZS treated hard clay (Suprex) compound shows the highest mechanical property following hard clay(S)/vinyl silane(V) and soft clay(GK)/vinyl silane(V) compounds. The TESPD and the ZS effectively helps a formation of a strong 3-dimensional network structure between silica and CIIR via coupling reaction due to bifunctional nature of TESPD. In addition to that, the ZS added compounds show both a better processability and mechanical properties compared to the S2 ones at low concentration due to improved compatibility between zinc soap and CIIR matrix. Only the ZS added compound shows both improved processabilities (Mooney, Extrusion torque-& pressure) and improved mechanical properties (degree of crosslinking, elongation modulus, tear, and fatigue to failure counts) on both CIIR/hard clay/CB and CIIR/soft clay/CB compounds.

• Macromolecular Research
• /
• v.15 no.1
• /
• pp.74-81
• /
• 2007

A series of photoreactive mesogens based on chalcone were prepared and their morphological behavior and reactivity were studied according to a variable number of alkyloxy tail carbons. The linear ester compounds 3a-h comprised two chalcone units connected to a benzene ring through ester linkages. All linear ester compounds showed enantiotropic liquid crystalline phases. The X-ray diffractograms for the mesophases of compounds 3a-h showed a set of reflections in the small-angle region which consisted of more than three sharp diffraction peaks with d spacings in the ratio of 1:1/2:1/3, confirming the well defined smectic A structures of the compounds. Compounds 3a-h were considered to be bifunctional monomers due to the presence of two photoreactive chalcone groups. Upon UV irradiation, its polymerization proceeded through the [2+2] addition reaction between chalcone units in a stepwise manner. An image pattern was obtained by the photopolymerization of the liquid crystal of the compound (3h) with decyloxy tails through a photomask. The irradiated part became dark while the masked part remained birefringent under polarized optical microscopy, which was ascribed to the production via the UV irradiation of a polymer or a dimer having cyclobutane rings by [2+2] addition, which thereby disrupted the alignment of the molecules.

• Fibers and Polymers
• /
• v.7 no.4
• /
• pp.352-357
• /
• 2006

The cotton fabrics were pretreated by sodium 2-(2,3-dibromopropionylamino)-5-(4,6-dichloro-1,3,5-triazinylamino) benzenesulfonate (DBDCBS) at alkaline condition ofroom temperature and then dyed with four disperse dyes having amino groups (C.I. Disperse Yellow 9, C.I. Disperse Red 11, C.I. Disperse Blue 56 and C.I. Disperse Violet 1) at acidic condition of high temperature. A novel hetero-bifunctional bridge compound, DBDCBS, has two reactive groups such as dichloro-striazinyl group and ${\alpha},\;{\beta}$-dibromopropionylamido group. The first has reactivity towards hydroxy group of cellulosic fiber and the second shows reactivity towards amino groups of disperse dye containing amino groups. The results indicate that it is possible to dye polyester/cotton blend at one-bath dyeing using one kind of disperse dye containing amino groups. Therefore, two kinds of dyeing methods such as two-bath process one-bath dyeing and one-bath process one-bath dyeing were investigated and their dyeabilities were compared. The differences between these two methods were negligibly small so that perfect one-bath one-step dyeing of polyester/cotton blend by one kind of disperse dye was achieved.

• Polymer(Korea)
• /
• v.38 no.4
• /
• pp.411-416
• /
• 2014

Due to the polar characteristics of silica compared to carbon black, the degree of silica dispersion, which affects the mechanical properties of rubber compounds, is an important issue. Wolff first introduced the in-rubber structure of particles (${\alpha}_F$) to express the structure development in the compounds; however, with the introduction of bifunctional silanes, his theory could not explain the 3-dimensional network structure of the compounds. Later his theory was expanded to express the composite interaction parameter (in-rubber structure of the compound) (${\alpha}_C$), which included Wolff's filler-filler interaction parameter (${\alpha}_F$), however, there was no reported experimental result proving the theory. This research first experimentally expressed the in-rubber structure of the compound ${\alpha}_C$ (= ${\alpha}_F+{\alpha}_{FP}$(filler-silane-rubber interaction parameter) + ${\alpha}_P$ (rubber-rubber interaction parameter)) upon mono- and bifunctional silane treated silica filled natural rubber (NR) compounds. Using different structure silanes, i.e. PTES, OTES, TESPD, and TESPT, the ${\alpha}_C$ value of each compound was measured and calculated. The ${\alpha}_C$ value of TESPT treated silica filled compound was 1.64, which composed of ${\alpha}_F$ (0.99), ${\alpha}_{FP}$ (0.31), and ${\alpha}_P$ (0.34).

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.150-151
• /
• 2006

Perfluoroaryl boranes are widely employed as co-catalysts in olefin polymerization processes. Perfluoroaryl diboranes, possessing borane centers in close proximity, are a subclass of this family of compounds that are in theory capable of chelating neutral and anionic bases. The resulting anions are exceptionally weakly coordinating. We have prepared examples of such compounds and studied their coordination behavior with neutral Lewis bases that have the capability to bridge Lewis acid sites in an effort to delineate the kinetic and thermodynamic factors that influence bonding mode. When protic Lewis bases such as alcohols or water are reacted with diboranes, strong Bronsted acids capable of initiating cationic polymerizations under unusual conditions result.

• Journal of Microbiology and Biotechnology
• /
• v.28 no.7
• /
• pp.1105-1111
• /
• 2018

The flavin-dependent monooxygenase Sam5 was previously reported to be a bifunctional hydroxylase with coumarate 3-hydroxylase and resveratrol 3'-hydroxylase activities. In this article, we showed the Sam5 enzyme has 3'-hydroxylation activities for methylated resveratrols (pinostilbene and pterostilbene), hydroxylated resveratrol (oxyresveratrol), and glycosylated resveratrol (piceid) as substrates. However, piceid, a glycone-type stilbene used as a substrate for bioconversion experiments with the Sam5 enzyme expressed in Escherichia coli, did not convert to the hydroxylated compound astringin, but it was converted by in vitro enzyme reactions. Finally, we report a novel catalytic activity of Sam5 monooxygenase for the synthesis of piceatannol derivatives, 3'-hydroxylated stilbene compounds. Development of this bioproduction method for the hydroxylation of stilbenes is challenging because of the difficulty in expressing P450-type hydroxylase in E. coli and regiospecific chemical synthesis.