• Journal of Navigation and Port Research
• /
• v.27 no.1
• /
• pp.81-86
• /
• 2003

In the paper, the power amplifier using active biasing for LDMOS MRF-21060 is designed and fabricated. Driving amplifier using AH1 and parallel power amplifier AH11 is made to drive the LDMOS MRF 21060 power amplifier. The variation of current consumption in the fabricated 5 Watt power amplifier has an excellent characteristics of less than 0.1A, whereas passive biasing circuit dissipate more than 0.5A. The implemented power amplifier has the gain over 12 dB, the gain flatness of less than $\pm$0.09dB and input and output return loss of less than -19dB over the frequency range 2.11~2.17GHz. The DC operation point of this power amplifier at temperature variation from $0^{\circ}C$ to $60^{\circ}C$ is fixed by active circuit.

• Journal of Advanced Marine Engineering and Technology
• /
• v.30 no.8
• /
• pp.901-906
• /
• 2006

In this paper, the power amplifier using active bias circuits for LDMOS(Lateral Diffused Metal Oxide Semiconductor) MRF-21180 is designed and fabricated. According to change the temperature, the gate voltage of LDMOS is controlled by the fabricated active bias circuits which is made of PNP transistor to suppress drain current. The driving amplifier using MRF-21125 and MRF-21060 is made to drive the LDMOS MRF-21180 power amplifier. The variation of current consumption in the fabricated 60 watt power amplifier has an excellent characteristics of less than 0.1 A, whereas a passive biasing circuit dissipates more than 0.5 A. The implemented power amplifier has the gain over 9 dB, the gain flatness of less than $\pm$0.1 dB and input and output return loss of less than -6 dB over the frequency range 2.11 $\sim$ 2.17 GHz. The DC operation point of this power amplifier at temperature variation 0 $^{\circ}C$ to 60 $^{\circ}C$ is fixed by active bias circuit.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.5B
• /
• pp.974-984
• /
• 2000

A CMOS voltage driver circuit for voltage down converter is proposed. An adaptive biasing technique is used to enhance load regulation characteristics. The proposed driver circuit uses the NMOS transistor as a driving transistor, so it does not suffer from large Miller capacitances which is one of the problems with conventional PMOS driving transistor, and hence achieves good phase margin and stable frequency response. No additional complex circuit for frequency compensation such as compensation capacitor is required in this implementation. For the same current capability, the size of NMOS transistor in driver circuit is smaller than that of PMOS counterpart. So the smaller die area can be achieved. The circuits is implemented using a 0.8 ${\mu}{\textrm}{m}$ CMOS process and has a die area of 150 ${\mu}{\textrm}{m}$ x 360 ${\mu}{\textrm}{m}$. Proposed circuit has a quiescent power of 60 . In the current driving range from 100 $mutextrm{A}$ to 50 ㎃, load regulation of 5.6 ㎷ is measured.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.703-706
• /
• 1998

This paper presents an efficient substrate-bias generator(SBG)for low-power, high-density DRAM's The proposed SBG can supply stable voltage with switching the supply voltage of driving circuit, and it can substitude the small capacitance for the large capacitance. The charge pumping circuit of the SBG suffere no VT loss and is to be applicable to low-voltage DRAM's. Also it can reduce the power consumption to make VBB because of it's high pumping efficiency. Using biasing voltage with positive temperature coefficient, VBB level detecting circuit can detect constant value of VBB against temperature variation. VBB level during VBB maintaining period varies 0.19% and the power dissipation during this period is 0.16mw. Charge pumping circuit can make VBB level up to -1.47V using VCC-1.5V, and do charge pumping operation one and half faster than the conventional ones. The temperature dependency of the VBB level detecting circuit is 0.34%. Therefore the proposed SBG is expected to supply a stable VBB with less power consumption when it is used in low power DRAM's.

• Journal of information and communication convergence engineering
• /
• v.17 no.4
• /
• pp.285-289
• /
• 2019

A 1.9-GHz linear CMOS power amplifier is presented. An adaptive bias circuit (ABC) that utilizes an AC ground to detect the power level of the input signal is proposed to enhance the linearity and efficiency of the power amplifier. The ABC utilizes the second harmonic component as the input to mitigate the distortion of the fundamental signal. The input power level of the ABC was detected at the AC ground located at the V_DD node of the power amplifier. The output of the ABC was fed into the inputs of the power stage. The input signal distortion was mitigated by detecting the input power level at the AC ground. The power amplifier was designed using a 180 nm RFCMOS process to evaluate the feasibility of the application of the proposed ABC in the power amplifier. The measured output power and power-added efficiency were improved by 1.7 dB and 2.9%, respectively.

• Journal of Navigation and Port Research
• /
• v.26 no.2
• /
• pp.215-220
• /
• 2002

In this paper, the 100 watt unit ower amplifier using temperature independent biasing for DTV (Digital Television) repeater application is designed and fabricated. The DC operation point of this unit power amplifier at temperature variation from $20^{\circ}C$ to $100^{\circ}C$ is fixed by active bias circuit. The variation of current consumption in the 100 watt unit power amplifier has an excellent characteristics of less than 0.6A. The implemented unit power amplifier has the gain over 12dB, the gain flatness of less than 0.5dB and input and output return, loss of than 15dB over the DTV repeater frequency range (470~806MHz). This unit power amplifier yields intermodulation distortion(IMD) of more than 32dBc at 2MHz offset, which satisfies the IMD at output power of 100 watt (50dBm).

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.32B no.5
• /
• pp.730-736
• /
• 1995

This paper presents the design of a CMOS programmable slew rate operational amplifier based upon a newly proposed concept, that is a switched parallel current subtraction circuit with adaptive biasing technique. By utilizing the newly designed circuit, it was proven that slew rate was linearly controlled and power dissipation was optimized. If the programmable slew rate amplifier is employed into mixed signal system, it can furnish the convenience of timing control and optimized power dissipation. Simulated data showed the slew rate ranging from 5. 83V/$\mu$s to 41.4V/$\mu$s, power dissipation ranging from 1.13mW to 4.1mW, and the other circuit performance parameters were proven to be comparable with those of a conventional operational amplifier.

• Journal of Sensor Science and Technology
• /
• v.7 no.1
• /
• pp.31-38
• /
• 1998

Multi-channel sensors can be used to increase the reliability and remove the random iloise in ion-sensitive field effect transistors(ISFETs). Multi-channel sensors is also an essential step toward potential fabrication of sensors for several ionic species in one device. However, when the multi-channel sensors are separately biased, the biasing problems become difficult, that is to say, the bias circuit is needed as many sensors. In this work, a circuit for biasing the four pH-ISFETs in null-balance method, where bias voltages are switched, was proposed. The proposed concept is need only one bias circuit for the four sensors. Therefore it has advantages of smaller size and lower power consumption than the case that all sensors are separately biased at a time. The proposed circuit was tested with discrete devices and its performance was investigated. In the recent trend, sensor systems are implemented as portable systems. So the verified measurement circuit was integrated by using the CMOS circuit. Fortunately, ISFET fabrication process can be compatible with CMOS process. Full circuit has a mask area of $660{\mu}m{\times}500{\mu}m$. In the future, this step will be used for developing the smart sensor system with ISFET.

• Proceedings of the IEEK Conference
• /
• 2000.07b
• /
• pp.579-582
• /
• 2000

In this paper, new linearization technique for bipolar OTAs using exponential-law circuits is described. The core circuit of the proposed OTAs is the multi-TANH doublet. The OTAs have adaptively biasing current sources, which consists of the exponential-law circuits. Three types of the OTAs are presented. The linear input voltage ranges of the OTAs are almost the same as the multi-TANH triplet. Further, the OTAs have lower power dissipation than the multi-TANH triplet.

• Journal of IKEEE
• /
• v.24 no.4
• /
• pp.942-949
• /
• 2020

In this paper, we propose an improved algorithmic ADC for CMOS Image Sensor that is suitable for a column-parallel readout circuit. The algorithm of the conventional algorithmic ADC is modified so that it can operate as a single amplifier while being independent of the capacitor ratio and insensitive to the gain of the op-amp, and it has a high conversion efficiency by using an adaptive biasing amplifier. The proposed ADC is designed with 0.18-um Magnachip CMOS process, Spectre simulation shows that the power consumption per conversion speed is reduced by 37% compared with the conventional algorithmic ADC.