• Earthquakes and Structures
• /
• v.19 no.5
• /
• pp.315-329
• /
• 2020

Through bolt connections in Concrete Filled Steel Tubes (CFSTs) has been proved to be good in terms of seismic performance and constructability. Stiffened extended end plate connection with full through type bolt helps to avoid field weld altogether, and hence to improve the quality of joints. An experimental study was conducted on the hysteretic performance of square interior beam-column connections using flat extended end plates with through bolt. The study focuses on the effect of the bond between the tie rod and the core concrete on the cyclic performance of the joint. The study also quantifies how much the interior joint is getting strengthened due to the confinement effect induced by bi-directional bolting, which is widely used in 3D moment resisting frames. For a better understanding of the mechanism and for the prediction of shear capacity of the panel zone, a mathematical model was generated. The various parameters included in the model are the influence of axial load, amount of prestress induced by bolt tightening, anchorage, and the concrete strut action. The study investigates the strength, stiffness, ductility, and energy dissipation characteristics. The results indicate that the seismic resistance is at par with American Institute of Steel Construction (AISC) seismic recommendations. The bidirectional bolting and bond effect have got remarkable influence on the performance of joints.

• Atmosphere
• /
• v.21 no.2
• /
• pp.143-149
• /
• 2011

A new multi-timescale analysis method, Ensemble Empirical Mode Decomposition (EEMD), is used to diagnose the variation of the MJO activity determined by 850hPa and 200hPa zonal winds from the National Centers for Environmental Prediction/National Center for Atmospheric Research (NCEP/NCAR) Reanalysis data for the 56-yr period from 1950 to 2005. The results show that MJO activity can be decomposed into 9 quasi-periodic oscillations and a trend. With each level of contribution of the quasi-periodic oscillation discussed, the bi-seasonal oscillation, the interannual oscillation and the trend of the MJO activity are the most prominent features. The trend increases almost linearly, so that prior to around 1978 the activity of the MJO is lower than that during the latter part. This may be related to the tropical sea surface temperature(SST). It is speculated that the interdecadal change in the MJO activity appeared in around 1978 is related to the warmer SST in the equatorial warm pool, especially over the Indian Ocean.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.77-82
• /
• 2002

운율은 음성의 초분절적인 면에 연관하는 음성의 한 성으로서 통상적으로 화자는 음성을 달하는 과정에서 청자의 이해를 돕기 위해 운율을 사용하게 된다. 본 논문은 이러한 운율을 이루는 성분 중의 하나인 운율구의 위치 예측에 대한 성능을 향상시키는 것에 그 목적을 둔다. 한국어 운율 정보에 대한 표기 방법 중의 하나인 K-ToBI를 기반으로 하여, 운율구의 경계와 그에 대한 레벨을 Break Indices 정보로서 나타내었고, 통계학 분야에서 제안된 Support Vector Machine(SVM)을 이용하여 시스템의 예측률 향상을 꾀하였다. 기존의 방법에서 사용된 트리 기반 모델을 이용하여 한국어 운율에 가장 많은 영향을 끼치는 언어 정보들을 추출하였고 이를 실험에 적용하였다. 기존의 트리 모델과 SVM 모델에 대한 예측률을 비교한 결과, 경계 유무 정보 예측과 4단계의 레벨을 가지는 경계 정보의 예측에서 모두 본 방법이 보다 높은 예측률을 보여 주어 본 연구에서 제시한 접근법이 운율구의 경계 정보를 예측하는 데에 있어 더욱 효과적인 접근법임을 실험적으로 입증하였다.

• Research in Community and Public Health Nursing
• /
• v.12 no.3
• /
• pp.557-569
• /
• 2001

The purpose of the study was to test the Pender's New Health Promotion Model in order to explain and predict female workers' health promotion behavior at manufacturing plants by using latent variable structural equation model. The data were collected from 280 female workers at 8 electronic factories located at Seoul. Kyunggi. and Incheon using a structured questionnaire through interview and self-report. LISREL was used to test the model. The results are as follows: 8 out of 15 paths of the modified one from the hypothetical model of Health Promotion were statistically significant and the total variance was 40%. The relationship between the previous health behavior and the cognitive emotional factor, and the interpersonal factor. and the situational factor each. and the relationship between perceived health status and interpersonal factor, and health promotion behavior each among gamma paths were unidirectional. On the beta paths. the relationship between the interpersonal factor and the cognitive emotional factor was bi-directional: the relationships amongst the interpersonal factor and the commitment to action, and the health promotion behavior were unidirectional. But the commitment to action was not a significant mediating factor to the health promotion behavior. Pender's New Model is considered good to explain and predict the female workers' health promotion behavior. The interpersonal factor should be considered in occupational nursing practice. But the concepts of situation and commitment to action should be further validated and measured.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.16 no.10
• /
• pp.3230-3255
• /
• 2022

Causality mining in NLP is a significant area of interest, which benefits in many daily life applications, including decision making, business risk management, question answering, future event prediction, scenario generation, and information retrieval. Mining those causalities was a challenging and open problem for the prior non-statistical and statistical techniques using web sources that required hand-crafted linguistics patterns for feature engineering, which were subject to domain knowledge and required much human effort. Those studies overlooked implicit, ambiguous, and heterogeneous causality and focused on explicit causality mining. In contrast to statistical and non-statistical approaches, we present Bidirectional Encoder Representations from Transformers (BERT) integrated with Multi-level Feature Networks (MFN) for causality recognition, called BERT+MFN for causality recognition in noisy and informal web datasets without human-designed features. In our model, MFN consists of a three-column knowledge-oriented network (TC-KN), bi-LSTM, and Relation Network (RN) that mine causality information at the segment level. BERT captures semantic features at the word level. We perform experiments on Alternative Lexicalization (AltLexes) datasets. The experimental outcomes show that our model outperforms baseline causality and text mining techniques.

• Steel and Composite Structures
• /
• v.48 no.5
• /
• pp.547-564
• /
• 2023

This study investigates the effect of bolt preloading on the rotational stiffness of stainless steel end-plate connections. An experimental programme incorporating 11 full-scale joint specimens are carried out comparing the behaviours of fully pre-tensioned (PT) and snug-tightened (ST) flush/extended end-plate connections, made of austenitic or lean duplex stainless steels. It is observed from the tests that the presence of bolt preloading leads to a significant increase in the rotational stiffness. A parallel finite element analysis (FEA) validated against the test results demonstrates that the geometric imperfection of end-plate has a strong influence on the moment-rotation response of preloaded end-plate connections, which is crucial to explain the observed "two-stage" behaviour of these connections. Based on the data obtained from the tests and FE parametric study, the performance of the Eurocode 3 predictive model is evaluated, which exhibits a significant deviation in predicting the rotational stiffness of stainless steel end-plate connections. A modified bi-linear model, which incorporates three key properties, is therefore proposed to enable a better prediction. Finally, the effect of bolt preloading is demonstrated at the system (structure) level considering the serviceability of semi-continuous stainless steel beams with end-plate connections.

• International Journal of Computer Science & Network Security
• /
• v.23 no.5
• /
• pp.53-64
• /
• 2023

Early detection of endometrial carcinoma in uterus is essential for effective treatment. Endometrial carcinoma is the worst kind of endometrium cancer among the others since it is considerably more likely to affect the additional parts of the body if not detected and treated early. Non-invasive medical computer vision, also known as medical image processing, is becoming increasingly essential in the clinical diagnosis of various diseases. Such techniques provide a tool for automatic image processing, allowing for an accurate and timely assessment of the lesion. One of the most difficult aspects of developing an effective automatic categorization system is the absence of huge datasets. Using image processing and deep learning, this article presented an artificial endometrium cancer diagnosis system. The processes in this study include gathering a dermoscopy images from the database, preprocessing, segmentation using hybrid Fuzzy C-Means (FCM) and optimizing the weights using the Whale Optimization Algorithm (WOA). The characteristics of the damaged endometrium cells are retrieved using the feature extraction approach after the Magnetic Resonance pictures have been segmented. The collected characteristics are classified using a deep learning-based methodology called Long Short-Term Memory (LSTM) and Bi-directional LSTM classifiers. After using the publicly accessible data set, suggested classifiers obtain an accuracy of 97% and segmentation accuracy of 93%.

• Steel and Composite Structures
• /
• v.50 no.4
• /
• pp.443-458
• /
• 2024

The construction industry, one of the biggest producers of greenhouse emissions, is under a lot of pressure as a result of growing worries about how climate change may affect local communities. Geopolymer concrete (GPC) has emerged as a feasible choice for construction materials as a result of the environmental issues connected to the manufacture of cement. The findings of this study contribute to the development of machine learning methods for estimating the properties of eco-friendly concrete, which might be used in lieu of traditional concrete to reduce CO₂ emissions in the building industry. In the present work, the compressive strength (f_c) of GPC is calculated using random forests regression (RFR) methodology where natural zeolite (NZ) and silica fume (SF) replace ground granulated blast-furnace slag (GGBFS). From the literature, a thorough set of experimental experiments on GPC samples were compiled, totaling 254 data rows. The considered RFR integrated with artificial hummingbird optimization (AHA), black widow optimization algorithm (BWOA), and chimp optimization algorithm (ChOA), abbreviated as ARFR, BRFR, and CRFR. The outcomes obtained for RFR models demonstrated satisfactory performance across all evaluation metrics in the prediction procedure. For R² metric, the CRFR model gained 0.9988 and 0.9981 in the train and test data set higher than those for BRFR (0.9982 and 0.9969), followed by ARFR (0.9971 and 0.9956). Some other error and distribution metrics depicted a roughly 50% improvement for CRFR respect to ARFR.

• Journal of KIISE
• /
• v.44 no.8
• /
• pp.803-812
• /
• 2017

T-commerce is technology-fusion service on which the user can purchase using data broadcasting technology based on bi-directional digital TVs. To achieve the best revenue under a limited environment in regard to the channel number and the variety of sales goods, organizing broadcast programs to maximize the expected sales considering the selling power of each product at each time slot. For this, this paper proposes a method to predict the sales of goods when it is assigned to each time slot. The proposed method predicts the sales of product at a time slot given the week-in-year and weather of the target day. Additionally, it combines a statistical predict model applying SVD (Singular Value Decomposition) to mitigate the sparsity problem caused by the bias in sales record. In experiments on the sales data of W-shopping, a T-commerce company, the proposed method showed NMAE (Normalized Mean Absolute Error) of 0.12 between the prediction and the actual sales, which confirms the effectiveness of the proposed method. The proposed method is practically applied to the T-commerce system of W-shopping and used for broadcasting organization.

• KIPS Transactions on Computer and Communication Systems
• /
• v.6 no.4
• /
• pp.179-188
• /
• 2017

It is very challenging to analyze the traffic flow in the city because there are lots of traffic accidents, intersections, and pedestrians etc. Now, even in mid-size cities Bus Information Systems(BIS) have been deployed, which have offered the forecast of arriving times at the stations to passengers. BIS also provides more informations such as the current locations, departure-arrival times of buses. In this paper, we perform the time-series analysis of the traffic flow using the data of the average trvel time and the average speed between stations extracted from the BIS. In the mid size cities, the data from BIS will have a important role on prediction and analysis of the traffic flow. We used the Dynamic Linear Model(DLM) for how to make the time series forecasting model to analyze and predict the average speeds at the given locations, which seem to show the representative of traffics in the city. Especially, we analysis travel times for weekdays and weekends separately. We think this study can help forecast the traffic jams, congestion areas and more accurate arrival times of buses.