• Journal of Advanced Navigation Technology
• /
• v.15 no.2
• /
• pp.248-255
• /
• 2011

An investigation has been carried out, by computer simulation, to evaluate the impact of dispersion compensation configurations on 960 Gbps wavelength division multiplexed (WDM) system with optical phase conjugator (OPC). The considered dispersion compensation configurations in this research are conventional one-end type and bi-end type. One-end and bi-end type are made by using one dispersion compensating fiber (DCF) and two DCFs to decrease dispersion accumulated in one single mode fiber (SMF) span, respectively. It is found that bi-end compensation configuration offers the equal performance with that of one-end configuration in WDM system with residual dispersion per span (RDPS) of 400 ps/nm if net residual dispersion (NRD) had to be optimized in each cases.

• Korean Journal of Materials Research
• /
• v.6 no.7
• /
• pp.684-691
• /
• 1996

To enhance the formation of Bi,Sr,Ca,Cu,O,(Bi-2223) single phase in a shorter reaction time, the intermediate compounds such as Bi,Sr,CuO,(Bi-2201). BizSr,CaCuz08(Bi-2212) and (Ca, Sr,, ,9)CuOz in the Bi-Sr-Ca-Cu-0 system were used as the precursors. The formation of Bi-2223 was enhanced in the mixture of Bi-2201 and (Ca, ,,Sr, 119)C~eOsZpe,c ially from the mixture with (Ca, 9I Sr, ,,)CuO,-rich composition compared to Bi, iPb, 4Sr2Ca,Cu3010-cxo mposition. The formation of Bi- 2223 essentially completed within 60h at 860$^{\circ}$C and 870$^{\circ}$C. However, a small amount of the remnant Bi-2212 phase did not disappear even after a prolonged reaction at 870'C. The merit of the proposed synthetic method using the intermediate precusors can be summarized as a shorter reaction time for the formation of Bi-2223 phase, in addition to a smaller amount of second phases compared to the conventional solid-state reaction method.

• Progress in Superconductivity and Cryogenics
• /
• v.6 no.1
• /
• pp.1-5
• /
• 2004

Long length of Bi-2223/Ag superconducting wives were fabricated by stacking and drawing process with advanced heat-treatment schedules. Intermediate annealing was carried out to increase the homogeneity and uniformity of the superconducting filaments embedded in the silver matrix. Phase modification from tetragonal to orthorhombic Bi-2212 by pre heat treatment(PHT) was executed to improve the texture and phase transformation of Bi-2223. Drawing stress was measured to predict the sausaging and stress limit. Rolling Parameters such as thickness. width and winding tension were investigated to roll the tape with uniformity. 1 km length of Bi-2223/Ag superconducting wires were fabricated without any breakage. Critical current (Je) of 270 m length of superconducting tapes was measured over than $70 A/cm^2$ continuously after final sintering.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11b
• /
• pp.304-307
• /
• 2001

High quality BSCCO thin films have been fabricated by means of an ion beam sputtering at various substrate temperatures, $T_{sub}$, and ozone gas pressures, $PO_3$. The correlation diagrams of the BSCCO phases appeared against $T_{sub}$ and $PO_3$ are established in the 2212 and 2223 compositional films. In spite of 2212 compositional sputtering, Bi220l and Bi2223 phases as well as Bi2212 one come out as stable phases depending on $T_{sub}$ and $PO_3$. From these results, the thermodynamic evaluations of ${\Delta}H$ and ${\Delta}S$ S, which are related with Gibbs' free energy change for single Bi2212 or Bi2223 phase are performed.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2003.02a
• /
• pp.105-108
• /
• 2003

Long length of Bi-2223 superconducting wires were fabricated by stacking, drawing process with different precursor owders and different heat-treatment histories. The precursor powders were 2 kinds of Pb content. And a part of the tapes were experienced pre-annealing process which caused tetragonal structure of Bi-2212 phase to orthorhombic structure of it was during drawing process. We confirmed the transformation of Bi-2212 phase from tetragonal structure to orthorhombic structure and reduction of second phases. We designed and made a continuous Ic measurement system for Bi-2223/Ag HTS tape. We could achieve best Ic of 65 A at the Bi-2223/Ag tape using low Pb content of precursor powder and experienced pre-annealing process.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.05a
• /
• pp.623-626
• /
• 2002

High quality BSCCO thin films have been fabricated by means of an ion beam sputtering at various substrate temperatures, Tsub, and ozone gas pressures, pO$_3$. The correlation diagrams of the BSCCO phases with Tsub and pO$_3$are established in the 2212 and 2223 compositional films. In spite of 2212 compositional sputterina Bi2201 and Bi2223 as well as Bi2212 phases come out as stable phases depending on Tsub and pO$_3$. From these results, the thermodynamic evaluation of ΔH and ΔS, which are related with Gibbs' free energy change for single Bi2212 or Bi2223 phase, was performed.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11a
• /
• pp.304-307
• /
• 2001

High quality BSCCO thin films have been fabricated by means of an ion beam sputtering at various substrate temperatures, T$\sub$sub/, and ozone gas pressures, PO$_3$. The correlation diagrams of the BSCCO Phases appeared against T7ub and PO3 are established in the 2212 and 2223 compositional films. In spite of 2212 compositional sputtering, Bi2201 and Bi2223 phases as well as Bi2212 one come out as stable Phases depending on T$\sub$sub/ and PO$_3$. From these results, the thermodynamic evaluations of ΔH and ΔS, which are related with Gibbs' free energy change for single Bi2212 or Bi2223 phase are performed.

• Journal of the Korean Magnetics Society
• /
• v.2 no.1
• /
• pp.29-36
• /
• 1992

The fundamental research about the amorphous ferrite, which is expected as the important material for electronic and information imdustry in future, was carried out in this work. Because the ferromagnetic amorphous ferrites reported recently are very inferior in magnetic properties than the crystalline ferrites, the development of the more ferromagnetic amorphous ferrites is required. In order to obtain the fundamental data for the preparation of amorphous ferrites, the hand-made twin-roller quenching apparatus was used for rapid quenching. Investigation on amorphous ferrite in the system $CaO-Bi_{2}O_{3}-Fe_{2}O_{3}$ has been carried out in the composition of 10-50 mole% CaO, 10-50 mole% $Bi_{2}O_{3}$, 40-70 mole% $Fe_{2}O_{3}$. Large magnetization values were obtained near the composition of the mixture of $BiFeO_{3}$ and $CaFe_{4}O_{7}$. Especially, an amorphous ${(CaO)}_{20}{(Bi_{2}O_{3})_{15}{(Fe_{2}O_{3})}_{65}$ specimen has a magmetization value of about 21.84 emu/g at 0K(10 kOe). Fe $M\"{o}ssbauer$ absorption spectrum indicates that this specimen is compsed of two amorphous phases, antiferromagnetic phase($\alpha$-phase) and ferromagnetic phase($\beta$-phase). Crystallization of this amorphous ferrite was happened in steps-$550^{\circ}C$ and $775^{\circ}C$, then observed crystal phases were perovskite phase of $BiFeO_{3}$ and $Fe_{2}O_{3}$ phase.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.12
• /
• pp.3011-3015
• /
• 2009

Structural and thermo-analytical studies were carried out to understand the phase formation kinetics of the single phase $Bi_5Ti_3FeO_{15}$ (BTFO) nanocrystals in $Bi_2O_3-Fe_2O_3-TiO_2$, during the polymerized complex (PC) synthesis method. The crystallization of Aurivillius phase $Bi_5Ti_3FeO_{15}$ layered perovskite was found to be initiated and achieved under the temperature conditions in the range of ${\sim}$800 to 1050$^{\circ}C$. The activation energy for grain growth of $Bi_5Ti_3FeO_{15}$ nanocrystals (NCs) was very low in case of NCs formed by PC (2.61 kJ/mol) than that formed by the solid state reaction (SSR) method (10.9 kJ/mol). The energy involved in the phase transformation of Aurivillius phase $Bi_5Ti_3FeO_{15}$ from $Bi_2O_3-Fe_2O_3-TiO_2$ system was ${\sim}$ 69.8 kJ/mol. The formation kinetics study of $Bi_5Ti_3FeO_{15}$ synthesized by SSR and PC methods would not only render a large impact in the nanocrystalline material development but also in achieving highly efficient visible photocatalysts.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05d
• /
• pp.61-64
• /
• 2003

This paper presents Bi thin films have been fabricated by atomic layer-by-layer deposition and co-deposition at an IBS method. The growth rates of the films was set in the region from 0.17 to 0.27 nm/min. Mg(100) was used as a substrate. In order to appreciate stable existing region of Bi 2212 phase with temperature and ozone pressure, the substrate temperature was varied between 655 and $820^{\circ}C$ and the highly condensed ozone gas pressure$(PO_3)$ in vacuum chamber was varied between $2.0{\times}10^{-6}$ and $2.3{\times}10^{-5}$ Torr. Bi 2212 phase appeared in the temperature range of 750 and $795^{\circ}C$ and single phase of Bi 2201 existed in the lower region than $785^{\circ}C$. Whereas, $O_3$ dependance on structural formation was scarcely observed regardless of the pressure variation. And high quality of c-axis oriented Bi 2212 thin film with $T_c$(onset) of about 90 K and $T_c$(zero) of about 45 K is obtained. Only a small amount of CuO in some films was observed as impurity, and no impurity phase such as $CaCuO_2$ was observed in all of the obtained films.