• 한국전기전자재료학회논문지
• /
• 제34권5호
• /
• pp.321-326
• /
• 2021

We fabricated BiAlO thin film by a solution process with a brush coating to be used as liquid crystal (LC) alignment layer. Solution-processed BiAlO was coated on the glass substrate by brush process. Prepared thin films were annealed at different temperatures of 80℃, 180℃, and 280℃. To verify whether the BiAlO film was formed properly, X-ray photoelectron spectroscopy analysis was performed on Bi and Al. Using a crystal rotation method by polarized optical microscopy, LC alignment state was evaluated. At the annealing temperature of 280℃, the uniform homogenous LC alignment was achieved. To reveal the mechanism of LC alignment by brush coating, field emission scanning electron microscope was used. Through this analysis, spin-coated and brush coated film surface were compared. It was revealed that physical anisotropy was induced by brush coating at a high annealing temperature. Particles were aligned in one direction along which brush coating was made, resulting in a physical anisotropy that affects a uniform LC alignment. Therefore, it was confirmed that brush coating combined with BiAlO thin film annealed at high temperature has a significant potential for LC alignment.

• 한국인터넷방송통신학회논문지
• /
• 제17권5호
• /
• pp.187-192
• /
• 2017

마이크로스트립 콤 어레이 안테나에 대한 CSRR-메타물질의 영향을 연구하였다. 마이크로스트립 콤 어레이 안테나는 12개의 방사체로 구성되었고 24GHz ISM 대역에서 16.09dBi의 이득과 0.24GHz 대역폭을 갖도록 설계하였다. 설계된 안테나는 안테나 면에 수직한 방사빔과 16.09dBi의 동일편파 이득, -10.86dBi의 교차편파 이득을 갖고 있었다. CSRR-메타물질은 0.24GHz이던 마이크로스트립 콤 어레이 안테나의 임피던스 대역폭을 3.6GHz로 대폭 증가시켰으나 동일편파 이득이 10.8dBi로 되고 교차편파 이득이 14.1dBi로 되어 동일편파와 교차편파가 혼재했으며 안테나 이득을 1.99dB 만큼 저하시켰다. 한편, CSRR 링의 스플릿 방향에 따른 연구에서 링의 스플릿 방향을 위로하거나 아래로 했을 때는 거의 같은 특성을 보였다. 그러나 링의 스플릿 방향을 위와 아래로 교번하여 배치하였을 때는 동일편파 이득이 -1.29dBi로 감소하고 교차편파 이득이 13.9dBi로 증가하여 교차편파가 주가 되는 파로 변환되었다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제1권1호
• /
• pp.7-14
• /
• 1999

Wekk oriented $Bi_{2} Sr_{2} CaCu_{2} O_{8}$ suppercondcting thick films were fabricared on copper tape by LiReac-PreCu (liquid reaction between a Cu-free precousor and Cu tape) method. Cu-free precursor power which is composed of $Bi_{2}Sr_{2}Ca_{5}$ was printed on a copper tape by screen printing and was heat-treated. The speciment were partially in a molten state at the heat treatment temperature (85$0^{\circ}C$~87$0^{\circ}C$). The heat heat treatments for the reaction were performed in air or low oxygen pressure in several stages. XRD analyses of the resulting Bi2Sr2CaCu2O8 superconducting tapes show that the $Bi_{2} Sr_{2} CaCu_{2} O_{8}$ phase is dominant and a small amount of $Bi_{2} Sr_{2} Cu_{2} O_{6}$ phase is detected. Both phases are aligned in the c-axis direction.

• Journal of Magnetics
• /
• 제21권2호
• /
• pp.168-172
• /
• 2016

$BiMnO_3$ has been a promising candidate as a magnetoelectric multiferroic while there have been many controversial reports on its ferroelectricity. The detailed analysis of its film growth, especially the growth of thin film having monoclinic symmetry has not been reported. We studied the effect of miscut angle, the substrate surface, and film thickness on the symmetry of $BiMnO_3$ thin film. A flat $SrTiO_3$ (110) substrate resulted in a thin film with three domains of $BiMnO_3$ and 1 degree miscut in the $SrTiO_3$ (110) substrate resulted in dominant domain preference in the $BiMnO_3$ thin film. The larger miscut resulted in a nearly perfect detwinned $BiMnO_3$ film with a monoclinic phase. This strong power of domain selection due to the step edge of the substrate was efficient even for the thicker film which showed a rather relaxed growth behavior along the $SrTiO_3$ [1-10] direction.

• 디지털융복합연구
• /
• 제15권9호
• /
• pp.427-434
• /
• 2017

본 연구는 국내 4개의 브랜드체험관을 분석하여, 브랜드체험관에서의 BI 표현 요소를 분석하고 브랜드체험관에서의 BI 표현 개선 방향을 제안하는데 목적이 있다. 1차적으로 문헌연구를 통해 현재 브랜드마케팅과 시각적 경험적 BI 요소의 이론적 배경을 고찰하고 이를 분석할 공간 표현 특성에 대해서 조사하였다. 2차로 이를 토대로 추출된 분석 기준을 가지고 국내의 4개 브랜드체험관을 분석하였다. 그 결과, 브랜드체험관은 BI 표현 개선을 위해 자사의 브랜드 이미지를 체험관에 명확하게 표현해야 하고 다양한 콘텐츠와 상황을 통해 이미지를 효과적으로 전달할 체험 전략이 필요하다. 또한, 단기적인 체험이 아닌 지속적인 관계를 이어 갈 장기적인 체험 콘텐츠도 필요하다. 본 연구를 바탕으로 앞으로 브랜드체험관의 BI 표현 연구를 위한 참고자료로 사용될 것을 기대하며, 이후 진행될 다른 분야의 BI 연구에도 도움이 되기를 바란다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.979-983
• /
• 2008

A bi-modal tram can travel in not only dedicated way but also road so as to reduce construction costs and increase vehicle operation efficiency, whose passenger capacity is 2,500 to 7,000 persons/direction/hour. A bi-modal has an electronic guidance system that knows the location and route of the vehicle, and uses magnetic markers in the road surface for reference. Since a bi-modal tram will be operated in the downtown area, there is some possibility that strong wind occurred between high-rise buildings can produce sudden lateral movement (displacement) of the vehicle to influence its automatic operation controlled by electronic guidance system. For bi-modal tram in the automatic operation mode, lateral movements occurred by strong wind were calculated and analyzed in the dynamic model developed by using the ADAMS. Some useful relations among vehicle speeds, wind speeds, and lateral behaviors were discussed in this paper.

• 한국전기전자재료학회논문지
• /
• 제16권5호
• /
• pp.429-434
• /
• 2003

The magnetic field sensor was fabricated with superconducting ceramics of BiPbSrCaCuO system. The sensor at liquid nitrogen temperature showed the increase of electrical resistance by applying magnetic field. Actually, the voltage drop across the sensor was changed from zero to a value more than 100 $\mu\textrm{V}$ by the applied magnetic field. The change of electrical resistance depended on magnetic field. The sensitivity of this sensor was 2.9 $\Omega$/T. The sensing limit was about 1.5${\times}$10$\^$-5/ T. The increase of electrical resistance by the magnetic field was ascribed to a modification of the Josephson junctions due to the penetrating magnetic flux into the superconducting material. Considering the observed properties of the superconductor with trapped magnetic flux, a magnetic sensor was fabricated to detect simultaneously both the intensity and the direction of the magnetic field.

• 한국전기전자재료학회논문지
• /
• 제17권7호
• /
• pp.788-792
• /
• 2004

The Electromagnetic properties in BiPbSrCaCuO superconductor was studied. In the measurement of current-voltage characteristics, a voltage across the superconducting sample was observed on applying an external magnetic field. The voltage continues to appear the removal of the magnetic field. The appearance of the voltage is ascribed to the trapping of magnetic flux. Depanding on the direction of appied magnetic flux less than $2.5\times{10}^-5$ T, the voltage in the magnetized sample increases or decreases. It is considered that mechanism of voltage occurrence can be explained by applying filament model.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.583-586
• /
• 2003

BiSrCaCuO superconducting thin films have been fabricated by co-deposition using the faraday cup. Despite setting the composition of thin film Bi2212, Bi(2201, 2212, 2223) phase were appeared. It was confirmed the obtained field of stabilizing phase was represented in the diagonal direction of the right below end in the Arrhenius plot of temperature of the substrate and $PO_3$, and it was distributed in the rezone.

• Transactions on Electrical and Electronic Materials
• /
• 제12권6호
• /
• pp.258-261
• /
• 2011

A ferroelectric $(Bi,La)_4Ti_3O_{12}$ (BLT) thin film fabricated by the pulsed-DC sputtering method was evaluated on a cell structure to check its compatibility to high density ferroelectric random access memory (FeRAM) devices. The BLT composition in the sputtering target was $Bi_{4.8}La_{1.0}Ti_{3.0}O_{12}$. Firstly, a BLT film was deposited on a buried Pt/$IrO_x$/Ir bottom electrode stack with W-plug connected to the transistor in a lower place. Then, the film was finally crystallized at $700^{\circ}C$ for 30 seconds in oxygen ambient. The annealed BLT layer was found to have randomly oriented and small ellipsoidal-shaped grains (long direction: ~100 nm, short direction: ~20 nm). The small and uniform-sized grains with random orientations were considered to be suitable for high density FeRAM devices.