• 제목/요약/키워드: Bi-Sn

검색결과 220건 처리시간 0.037초

Pb-Free 도금용액 및 피막의 신뢰성평가 (A Reliability Test for Pb-Free Plating Solution and its Deposit)

  • 허진영;구석본;이홍기
    • 청정기술
    • /
    • 제11권3호
    • /
    • pp.153-164
    • /
    • 2005
  • This study found a reliable evaluation for four kinds of pb-Free plating solutions and it's layers, through pure Sn, SnAg, SnBi and SnCu. These four kind of solutions are widely used to pb-Free plating. Hull-cell, Harring-blum, coverage, throwing power, current efficiency, stability, life-time, composition, hardness, roughness, abrasion, scratch, solderability, corrosion, contact angle, morphology, SIR(Surface insulation resistance) and Whisker test were experimented. Also, Using ICP, XRF, FE-SEM, EDS, temperature/humidity chamber, solderability tester, hardness tester, roughness tester, abrasion tester, salt spray tester, contact angle tester, SIR tester, and microscope. In this paper could be shown the systematic and various analysis for reliability about four kinds of pb-Free plating solutions, processes and it's deposit surface.

  • PDF

북미산 흑호두나무 Bi-Sn 용융합금 복합체의 제조와 특성 (Manufacturing and Properties of Bi-Sn Impregnated Wood Composites of Juglans nigra)

  • 강석구;박계신;이호;서인수;이종신;이화형
    • 한국가구학회지
    • /
    • 제22권1호
    • /
    • pp.54-62
    • /
    • 2011
  • The metalized wood composites with natural grain of imported Juglans nigra, which was impregnated with low melting alloy were manufactured and evaluated in this study. And the proper manufacturing conditions was also investigated in this study. The low melting alloy with bismuth (Bi) and tin (Sn) which are harmless to humans, was applied to this new composites. The composites showed not only no defects of discoloration, delamination, swelling, and cracking, because of high dimensional stability and low thickness swelling, but also much improved performance such as high bending strength, high hardness, abrasion resistance, high thermal conductivity as floor materials. This study also suggested the proper impregnating condition, such as 10 minutes of the preliminary vacuum time, $186^{\circ}C$ of the heating temperature and 10 minutes of the maintaining pressure time at the pressure of $30kgf/cm^2$. This metalized wood composites showed 7 times higher density than control, great increase in bending strength from $131.8N/mm^2$ to $192.3N/mm^2$, and great increase in hardness from $18.2N/mm^2$ to $90.4N/mm^2$. The composites demonstrated not only high emissivity of 91%, high shilding effectiveness of 92.59∼99.99%, high fire resistance but also great decrease in abrasion depth, water absorption and thickness swelling.

  • PDF

Pb-free Status and Strategy of Semiconductor Business in Samsung Electronics

  • Jeong Se-Young
    • 한국마이크로전자및패키징학회:학술대회논문집
    • /
    • 한국마이크로전자및패키징학회 2004년도 ISMP Pb-free solders and the PCB technologies related to Pb-free solders
    • /
    • pp.79-92
    • /
    • 2004
  • RoHS compliant products are now being mass-produced. Eco-product(Pb-free+RoHS compliant+Halogen-free) will be possible from 2005. Pb-free flip chip will be qualified by 2004. 4Q. Lead Finish: SnBi-Under mass production Pd PPF-Under small production Matte Sn-will be internally qualified by 2004. 4Q Development of Pb-free Solder Ball: Stable Supply, Cost Down.

  • PDF

중국 호남성 시죽원 광상의 W-Sn-Bi-Mo광화작용 (W-Sn-Bi-Mo Mineralization of Shizhuyuan deposit, Hunan Province, China)

  • 윤경무;김상중;이현구;이찬희
    • 자원환경지질
    • /
    • 제35권3호
    • /
    • pp.179-189
    • /
    • 2002
  • 중국 호남성 침주시에서 북동 16 km지점에 위치하는 시죽원 다금속 광상의 지질은 원생대의 변성퇴적암류, 데본기탄산염암, 쥬라기 화강암류, 백악기 반암류 및 초염기성맥암으로 구성된다. 시죽일 다금속 광상은 중-조립질 흑운모화강암과 관련되어 있다. 광체의 산출상태, 광물의 산출상태 및 공생관계를 토대로 광화시기는 스카른, 그라이젠 및 열수시기로 나뉜다. 스카른 시기의 광체는 주로 Ca-스카른으로 천리산 화강암체 주변에 발달되며, 석류석, 휘석, 베수비아나이트, 규회석, 각섬석, 형석, 녹염석, 방해석, 회중석, 철망간중석, 휘창연석, 휘수연석, 석석, 자연창연, 미확인 Bi-Te-S계 광물, 자철석 및 적철석 등이 산출된다. 그라이젠 시기는 중-조립질 흑운모화강암의 잔류용액과 관련되며, 광체는 판상 및 맥상으로 구분된다. 이 시기는 주로 석영, 장석, 백운모, 녹니석, 전기석, 황옥, 녹주석, 인회석, 회중석, 철망간중석, 휘수연석, 휘창연석, 석석, 자연창연, 미확인 우라늄광물, 미확인 희토류광물로 구성되고, 소량의 황철석, 자철석, 황동석, 적철석 등이 산출된다. 회중석은 누대조직을 보이며, 중심부에서 MoO$_3$ 함량이 9.17%로 외곽보다 높게 나타난다. 철망간중석의 화학조성은 WO$_3$; 71.20~77.37 wt.%, FeO; 9.37~18.4 wt.%, MnO; 8.17~15.31 wt.% 및 CaO; 0.01~4.82 wt.% 이다. 석석의 FeO 함량은 1.30~4.75 wt.%이고, 스카른 시기가 높은 함량을 보인다. 자연창연의 Te 및 Se 함량은 각각 0.00~1.06 wt.%와 0.00~0.57 wt.%이다. 미확인 Bi-Te-S 계 광물은 Bl: 78.62~80.75 wt.%, Te: 12.26~14.76 wt.%, Cu; 0.00~0.42 wt.%, S; 5.68~6.84 wt.%, Se; 0.44~0.78 wt.%.이다.

Bi계 세라믹에서 초전도체 특성에 미치는 도우핑 원소의 영향 (Effect of Doping Elements on Superconducting Characteristics in Bi-system Ceramics)

  • 양승호;박용필;김용주
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2000년도 하계학술대회 논문집
    • /
    • pp.198-203
    • /
    • 2000
  • This paper investigated the effects of doping elements on the Bi-Sr-Ca-Cu-O ceramics. The doping elements can be classified into four groups depending on their superconducting characteristics in the Bi-Sr-Ca-Cu-O structure. The first group of doping elements(Co, Fe, Ni and Zn) substitute into the copper site and can reduce the critical temperatures of the 2223 and 2212 phases. The second group of doping elements(Y and La) substitute into the Ca site and cause the disappearance of the 2223 phase and increase the critical temperatures in the 2212 phase. The third group of doping elements(P and K) have a tendency to decompose the superconducting phase and reduce the optimal sintering temperature. The fourth group of doping elements(B, Si, Sn and Ba) almost unaffected the superconductivity of the 2223 and 2212 phase.

  • PDF

Bi-Sr-Ca-Cu-O 세라믹의 도우핑 특성 (Deping characteristics of the Bi-Sr-Ca-Cu-O ceramics)

  • 박용필;김영천;황석영
    • E2M - 전기 전자와 첨단 소재
    • /
    • 제9권1호
    • /
    • pp.1-8
    • /
    • 1996
  • We investigated the effects of doping elements on the Bi-Sr-Ca-Cu-O ceramics. The doping elements can be classified into four groups depending on their supeconducting characteristics in the Bi-Sr-Ca-Cu-O structure. The first group of doping elements(Co, Fe, Ni and Zn) substitute into the copper site and can reduce the critical temperatures of the 2223 and 2212 phases. The second group of doping elements(Y and La) substitute into the Ca site and cause the disappearance of the 2223 phase and increase the critical temperatures in the 2212 phase. The third group of doping elements(P and K) have a tendency to decompose the superconducting phase and reduce the optimal sintering temperature. The fourth group of doping elements(B, Si, Sn and Ba) almost unaffected the superconductivity of the 2223 and 2212 phase.

  • PDF