• Journal of Microbiology and Biotechnology
• /
• 제30권10호
• /
• pp.1559-1566
• /
• 2020

Compound K (C-K) is one of the most pharmaceutically effective ginsenosides, but it is absent in natural ginseng. However, C-K can be obtained through the hydrolysis of protopanaxadiol-type ginsenosides (PPDGs) in natural ginseng. The aim of this study was to obtain the high concentration of food-available C-K using PPDGs in Korean ginseng extract by an extracellular enzyme from Aspergillus niger KACC 46495. A. niger was cultivated in the culture medium containing the inducer carboxymethyl cellulose (CMC) for 6 days. The extracellular enzyme extracted from A. niger was prepared from the culture broth by filtration, ammonium sulfate, and dialysis. The extracellular enzyme was used for C-K production using PPDGs. The glycoside-hydrolyzing pathways for converting PPDGs into C-K by the extracellular enzyme were Rb1 → Rd → F2 → C-K, Rb2 → Rd or compound O → F2 or compound Y → C-K, and Rc → Rd or compound Mc1 → F2 or compound Mc → C-K. The extracellular enzyme from A. niger at 8.0 mg/ml, which was obtained by the induction of CMC during the cultivation, converted 6.0 mg/ml (5.6 mM) PPDGs in Korean ginseng extract into 2.8 mg/ml (4.5 mM) food-available C-K in 9 h, with a productivity of 313 mg/l/h and a molar conversion of 80%. To the best of our knowledge, the productivity and concentration of C-K of the extracellular enzyme are the highest among those by crude enzymes from wild-type microorganisms.

• 대한화학회지
• /
• 제12권1호
• /
• pp.4-11
• /
• 1968

With the selected emulsifiers for the emulsion polymerization of methyl methacrylate, the HLB of the emulsifier in the reaction system has been studied on the effect of the ratio of tetra sodium-N-(1,2-dicarboxy ethyl)-N-octadecyl sulfosuccinamate(Aerosol 22) to polyethylene glycol nonyl phenyl ether (Noigen EA 160), and also sodium lauryl sulfate(Quolac EX-UB), Disodium-N-octadecyl sulfosuccinamate (Aerosol 18) and Aerosol 22 as emulsifiers having various hydrophilic groups in the molecules have been studied. Results are as follows; 1) The viscosity of the emulsions and the molecular weight of the polymers have maximum values at a constant HLB value of emulsifiers, but their stabilities show minimum point at the value with the titration with the three kinds of mono, bi, tri-valent electrolytes. These results are agreed on the theory of Greth & Wilson in which the properties of polymer emulsions depend upon the HLB system of emulsifiers. 2) The viscosity of the emulsions and the molecular weights of the produced polymers increase more in the case of blending of Aerosol 22 to Noigen EA-160 than of the separate using. 3) The coagulation effects of the divalent electrolytes($ex,\;Ca^{++},\;Zn^{++}$) are contrast to the effects of monovalent($ex,\;Na^+$) and trivalent($ex,\;Al^{+++}$) in the emulsions with Aerosol 18 or Aerosol 22 which have more than two hydrophilic groups. It seems that the stability of the O/W emulsions by electrolytes is directly related to the parameters of surface physical chemistry such as surface geometry of surface chemical constitution of polymer particles.

• 식물조직배양학회지
• /
• 제21권2호
• /
• pp.99-103
• /
• 1994

비선택성 제초제인 bialaphos는 고등식물에 있어서 glutamine 합성을 억제하여 식물체를 고사 시키는 능력을 갖고 있다. 본 연구에서 acetylteansferase에 의해 encoding된 bialaphos 저항성 유전자(bar gene)는 세균(Pseudomonas sryngae pv tabaci)의 genomic DNA로부터 cloning된 것을 사용하였다. 수분시킨 담배의 화계에 일정한 시간별로 bar 유전자를 처리한 결과 수분 후 30-40시간 사이의 처리구 에서 형질전환 식물체가 가장 많이 얻어 졌다. 그러한 형질전환 식물체의 kanamycin과 bialaphos 저항성 형질은 자식후대(T$_1$, T$_2$)에 있어서도 우성형질로 유전되었으나 wild type의 담배는 상기의 약제를 처리 하였을때 전부 고사하였다. 그리고, T$_1$세대의 형질전환 식물체로부터 전 염색체 DNA를 추출하여 Southern 분석한 결과 bar 유전자가 식물의 염색체상에 안정하게 존재하는 것을 확인하였다. 이상의 결과로부터 담배의 수분, 수정 시기에 외부유전자인 bar를 화주에 처리함으로써 bialaphos 저항성 식물을 만들어낼 수 있었다.

• Archives of Reconstructive Microsurgery
• /
• 제14권1호
• /
• pp.63-69
• /
• 2005

Purpose: The purpose of this study was to analyze the clinical results after Steindler flexoplasty. Materials and Methods: We analyzed 6 cases who had nearly normal finger and wrist joint flexion function, but could not flex elbow joint actively because of upper arm type brachial plexus injury. We performed operation during the period from February 1997 to July 2003. There were 5 males and 1 female with mean age of 28 years (range: $19{\sim}51$ years) when Steindler flexoplasty was done. The average follow-up period was 3 years 11 months (range: 12 months${\sim}$7 years 4 months). We assessed active range of motion of elbow joint, muscle power and elbow function by Mayer & Green grade scale at last follow-up. We assessed how much they were favorable for Steindler flexoplasty and had improvement of upper extremity function and correction of deformity. Results: Postoperative, flexion range of elbow joint improved to average $111.7^{\circ}$ (range: $90{\sim}130^{\circ}$). $25.8^{\circ}$ (range: $15{\sim}45^{\circ}$) in flexion contracture and $16.6^{\circ}$ (range: $10{\sim}35^{\circ}$) in pronation contracture were remained. Range of motion of elbow joint improved to average $85.3^{\circ}$ (range: $45{\sim}105^{\circ}$). Flexion power of elbow joint improved to Grade 5 in all cases. Postoperatively on Mayer & Green grade scale, there were excellent in 3 cases(50%), good in 2 cases(33.3%), fair in 1 case(16.7%). On patient's own assessment of functional improvement, there were excellent in 4 cases(66.6%), good in 1 case(16.7%) and fair in 1 case(l6.7%). Conclusion: Steindler flexoplasty can reserve good clinical results with being improved to active flexion of elbow joint in cases who have functional hand and wrist, but paralysis upper arm muscle in brachial plexus injury.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.149-149
• /
• 2017

The RING (Really Interesting New Gene) finger proteins are known to play crucial roles in various abiotic stresses in plants. In this study, we report on RING finger E3 ligase, ${\underline{O}ryza}$ ${\underline{s}ativa}$ ${\underline{s}alt$-, ${\underline{A}BA}$- and ${\underline{d}rounght}$ stress-${\underline{i}nduced}$ RING finger ${\underline{p}}rotein{\underline{1}}$ gene (OsSAD1). In vitro ubiquitination assay demonstrated that unlike OsSAD1, a single amino acid substitution ($OsSAD1^{C168A}$) of the RING domain showed no E3 ligase activity, supporting the notion that the activity of most E3s is specified by a RING domain. Result of Yeast-Two hybridization, In vivo protein degradation assay supports that OsSAD1 interacting with 3 substrate, OsSNAC2, OsGRAS44 and OsPIRIN1, and mediates proteolysis of 3 substrates via the 26S proteasome pathway. Subcellular localizations of OsSAD1 while approximately 62% of transient signals were detected in cytosol, 38% of signals were showed nucleus. However, transiently expression of OsSAD1 was detected in cytosol 30% while as 70% of nucleus under 200 mM salt treated rice protoplasts. Results of bimolecular fluorescence complementation (BiFC) showed that two nucleus-localized proteins (OsSNAC2 and OsGRAS44) interacted with OsSAD1 in the both cytosol and nucleus. Heterogeneous overexpression of OsSAD1 Heterogeneous overexpresssion of OsSAD1 in Arabidopsis exhibited sensitive phenotypes with respect to Salt-, mannitol-responsive seed germination, seedling growth. In ABA conditions, OsSAD1 overexpression plants showed highly tolerance phenotypes, such as root length and stomatal closure. Our findings suggest that the OsSAD1 may play a negative regulator in salt stress response by modulating levels of its target proteins.

• Journal of Korean Neurosurgical Society
• /
• 제47권6호
• /
• pp.446-453
• /
• 2010

Objective : The purpose of this study was to analyze the biomechanical effects of three different constrained types of an artificial disc on the implanted and adjacent segments in the lumbar spine using a finite element model (FEM). Methods : The created intact model was validated by comparing the flexion-extension response without pre-load with the corresponding results obtained from the published experimental studies. The validated intact lumbar model was tested after implantation of three artificial discs at L4-5. Each implanted model was subjected to a combination of 400 N follower load and 5 Nm of flexion/extension moments. ABAQUS$^{TM}$ version 6.5 (ABAQUS Inc., Providence, RI, USA) and FEMAP version 8.20 (Electronic Data Systems Corp., Plano, TX, USA) were used for meshing and analysis of geometry of the intact and implanted models. Results : Under the flexion load, the intersegmental rotation angles of all the implanted models were similar to that of the intact model, but under the extension load, the values were greater than that of the intact model. The facet contact loads of three implanted models were greater than the loads observed with the intact model. Conclusion : Under the flexion load, three types of the implanted model at the L4-5 level showed the intersegmental rotation angle similar to the one measured with the intact model. Under the extension load, all of the artificial disc implanted models demonstrated an increased extension rotational angle at the operated level (L4-5), resulting in an increase under the facet contact load when compared with the adjacent segments. The increased facet load may lead to facet degeneration.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.361.2-361.2
• /
• 2014

Transition metal dichalcogenides (MoS2, WS2, WSe2, MoSe2, NbS2, NbSe2, etc.) are layered materials that can exhibit semiconducting, metallic and even superconducting behavior. In the bulk form, the semiconducting phases (MoS2, WS2, WSe2, MoSe2) have an indirect band gap. Recently, these layered systems have attracted a great deal of attention mainly due to their complementary electronic properties when compared to other two-dimensional materials, such as graphene (a semimetal) and boron nitride (an insulator). However, these bulk properties could be significantly modified when the system becomes mono-layered; the indirect band gap becomes direct. Such changes in the band structure when reducing the thickness of a WS2 film have important implications for the development of novel applications, such as valleytronics. In this work, we report for the controlled synthesis of large-area (~cm2) single-, bi-, and few-layer WS2 using a two-step process. WOx thin films were deposited onto a Si/SiO2 substrate, and these films were then sulfurized under vacuum in a second step occurring at high temperatures ($750^{\circ}C$). Furthermore, we have developed an efficient route to transfer these WS2 films onto different substrates, using concentrated HF. WS2 films of different thicknesses have been analyzed by optical microscopy, Raman spectroscopy, and high-resolution transmission electron microscopy.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.356.1-356.1
• /
• 2014

The Isolation of few-layered transition metal dichalcogenides has mainly been performed by mechanical and chemical exfoliation with very low yields. in particular, the two-dimensional layer of molybdenum disulfide (MoS2) has recently attracted much interest due to its direct-gap property and potential application in optoelectronics and energy harvesting. However, the synthetic approach to obtain high-quality and large-area MoS2 atomic thin layers is still rare. In this account, a controlled thermal reduction-sulfurization method is used to synthesize large-MoOx thin films are first deposited on Si/SiO2 substrates, which are then sulfurized (under vacuum) at high temperatures. Samples with different thicknesses have been analyzed by Raman spectroscopy and TEM, and their photoluminescence properties have been evaluated. We demonstrated the presence of mono-, bi-, and few-layered MoS2 on as-grown samples. It is well known that the electronic structure of these materials is very sensitive to the number of layer, ranging from indirect band gap semiconductor in the bulk phase to direct band gap semiconductor in monolayers. This synthetic approach is simple, scalable, and applicable to other transition metal dichalcogenides. Meanwhile, the obtained MoS2 films are transferable to arbitrary substrates, providing great opportunities to make layered composites by stacking various atomically thin layers.

• 자원환경지질
• /
• 제12권2호
• /
• pp.79-93
• /
• 1979

한반도 내에 부존되고 있는 중적광상들은 세 주요한 Metallousenetic Epoch (Pre-Cambrian E., Jurassic-early Cretaceous E., 및 late Cretaceous-early Tertiary E.)에 생성되었고 성인으로 열수작용과 접촉교대작용에 기인된다고 보고되었다. 이중 12개 광상(달성, 산내, 일광, 상동, 대화, 월악, 복수, 옥방, 쌍전, 홍성, 삼봉, 청양)을 본 연구의 대상으로 택하고 각 지역에서 채취한 표품중 모두 25개 시료에 대하여 지화학적 실험을 수행하였다. 즉 각 분쇄된 시료 (-80+120mesh)는 super panner, 중액, isodynamic separator, UV lamp를 이용한 물리적인 처리과정을 거쳐 최종으로 입체현미경 하에서 단체분리된 후 Jarrell-Ash 1.5m Grating Spectrometer를 이용하여 본 연구대상 시료로 개발한 Spectrochemical method (Carrier: NaCl, Internal standard: $La_2O_3$)로 정량 분석되었다. 본 연구에서 밝혀낸 국내 회중석 광내에 함유되는 희유 윈소의 종류는 모두 Al, Bi, Fe, Si, Mn, Pb, Mg, Sn, Mo, Cu, Sr, Cr, Y, Ag, Ti, Ni, As, Yb의 18개 원소이며, 이들은 각각의 절대적 및 상대적인 함량과 각 광화작용의 시기, 광상의 성인, 모암, 각 원소의 mobility 그리고 회중석광의 형광색 및 육안색과 비교 검토되었다. 본 연구의 결과로 회중석광이 정출되는 과정에서 유사한 지질환경의 물리화학적인 여건이 이루어지면 그 내에 함유되는 몇 성분원소들의 화학적인 특성은 매우 유사성을 보여주는 typochemical habit를 가짐을 알 수 있었다. 본 연구에서 밝혀진 한국산 회중석 광내의 희유성분(稀有成分)으로서 Y, Mn, Sr 원소들의 Geochemical mobility의 특성(特性)은 앞으로 회중석광의 심도탐광을 위하여 고려되어야하고, 더욱 연구개발되어야 할 것이다. 또한 상기 회중석 광내의 물리적 및 화학적으로 결합되어 있는 불순물의 희유성분들은 선광 제련 파정에서 금속성분의 추출농집공정(工程)에 유용한 자료가 될 것이다.

• 대한족부족관절학회지
• /
• 제13권1호
• /
• pp.7-13
• /
• 2009

Purpose: The purpose of this study was to evaluate the effect of Sodium hyaluronate-Sodium carboxymethyl cellulose (HA-CMC) on tissue adhesion after tenorrhapy in tenotomized Achilles tendon of the Sprague-Dawley rat. Materials and Methods: Twenty-eight legs of 14 Sprague-Dawley rat were used in study. After tenotomy of the Achilles tendons, tenorrhaphies were performed. Simple tenorrhaphy without any other procedures were performed on the left Achilles tendons (control group), and additional HA-CMC injections were done prior to the tenorrhaphy on the right Achilles tendons (HA-CMC group). Gross and histological examinations were made to identify differences between the two groups, 1, 2, 6, 8, 10, 12 and 14 weeks respectively. Results: Distinct decrease in granulation tissues and adhesions were seen in the HA-CMC group during gross inspection at 6 and 8 week after the operation. On histological analysis of the HA-CMC group, although increased infiltrations of inflammation cells were observed during 1 week, less adhesion were seen at 6, 8 and 10 weeks after the operation. In HA-CMC group, superior healing processes were seen at 6, 8 and 10 weeks and less fibrotic changes, compared to control group, were seen at 2 and 6 weeks. Conclusion: Prevention of adjacent tissue adhesion was made possible through decrease in collagen deposition and fibrosis by injecting HA-CMC before tenorrhaphy of Achilles tendon. Also, histologically faster healing process of the collagen fibers within the Achilles tendon was observed.