• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 A
• /
• pp.302-304
• /
• 1998

Self magnetic field in a Bus bar usually degrades the critical current in it. Actually the total critical current of a Bus bar is not the same as the sum of total critical current of each stacked HTS tape. This is due to the self field effects in a bus bar. To reduce the degradations of critical current in a bus bar, we need to analyze the self field distributions in a bus bar. Conceptually, by rearranging the each stacked tapes, the self field effects can be minimized. In this paper, we calculate the self magnetic field distributions across a bus bar analytically, with the variations of the relative angle of the two conductors in a go-and-return pair. As a result, we suggest that the optimum relative angle exist which minimize the self field effect in a bus bar.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 B
• /
• pp.1118-1120
• /
• 2004

For the first time in Korea, a 100hp high Tc superconducting(HTS) motor has been designed, developed and successfully tested recently. The design was based on 2-dimensional electromagnetic field analysis of cylindrical coordinate. The field winding of rotor was wound with Bi-2223 tapes and tested after assembled with other rotor components. The stator had air-gap type armature windings which allow higher terminal voltage and more sinusoidal voltage waveform than conventional iron cored machines. Steady state open & short-circuit test and resistive load test were conducted also in generator mode. The fabrication and test results of this machine were discussed in this paper.

• 한국초전도ㆍ저온공학회논문지
• /
• 제10권3호
• /
• pp.23-26
• /
• 2008

Constructions of coated conductor which is differently from Bi-2223 is comprised multiple coatings on a base material or substrate and designed to achieve the highest degree of alignment possibility of the atoms in the superconductor material. In this study, we are measured and analyzed degradations of critical current according to diameter. In addition to study the effects of bending strain, we observed the AC loss of coated conductor and carried out analytical study for relation between Ic degradation and AC loss as well. The measurement of AC loss and numerical calculation was carried out based on Norris theory to compare with experimental results. The relationship between critical current and AC loss of HTS tapes with partial deformation by mechanical stress was studied. These results will amount the most important basis data in the of HTS cable, magnet, etc that winding work is required.

• 에너지공학
• /
• 제20권3호
• /
• pp.185-190
• /
• 2011

본 논문은 초전도 에너지 저장장치(SMES)용 전도냉각형 고온초전도 자석의 설계, 제작 및 평가에 대해 기술한다. 고온초전도 자석은 황동 안정화재를 갖는 2개의 Bi-2223 다심 선재가 적층된 4-ply 도체로 제작된 22개의 double pancake coil(DPC)로 구성된다. 그리고, 각 DPC는 내경과 외경이 각각 500 mm, 691 mm이고 높이가 10 mm인 2개의 single solenoid coil로 구성된다. 코일 내부의 전기적 손실에 의해 발생된 열의 냉각을 위하여 DPC 사이에 두께 3 mm의 알루미늄 판이 내재된다. 고온초전도 자석은 2단 Gifford McMahon 냉동기에 의해 5.6 K까지 냉각된다. 충전전류가 증가할수록 방전시 고온초전도에서의 최대 온도가 증가 하였다. 충전전류가 360 A일 때 ��치 없이 고온초전도 자석에 1 MJ의 자기에너지가 성공적으로 저장되었다. 본 연구에서는 SMES용 전도 냉각형 고온초전도자석에 대한 열적, 전자기적 특성을 보이고, 본 연구를 통해 얻어진 결과는 전도냉각형 고온초전도자석의 최적설계 및 안정도 평가에 활용될 것이다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.3-5
• /
• 2001

Racetrack coils are used in many areas of superconductivity applications such as generators, motors, maglev, wiggler magnets and so on. The fabrication and characteristics of race-track type High Tc Superconducting (HTS) magnets were carried out. The Magnet is composed of 3 pancake coils wound by 37-filamental Bi-2223/ Ag-alloy tapes. Quench current ($I_q$) of both whole magnet and 3 pancake coils were measured. At 77K under the self-field, $I_q$ of magnet was 12A, while in the case of middle pancake coil, $I_q$ was 15A. The upper pancake coils of racetrack magnet with iron plates, magnet having optimized current distribution and initial magnet are compared with each other through 3D FEA, manufacturing and testing these magnets. The measured performance of the upper pancake coil #3 with iron plates improved by 50% on the basis of initial pancake coil #3. Quench current ($I_q$) of field winding was 12A. In addition, the fabrication processes and the characteristics of HTS magnet are described.