• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.8
• /
• pp.785-789
• /
• 2006

BiSrCaCuO(2223) superconductor was fabricated by the thermal pyrolysis method. The superconducting precursor produced by the dehydration of the gel at $120^{\circ}C$ for 12 h is not in the amorphous state as expected but in a crystalline state. In this paper, the establishment of fabrication condition was examined so as to improve the related properties to the practical use of BiSrCaCuO superconductor, and we reported the production of the BiSrCaCuO by the pyrolysis method.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2002.02a
• /
• pp.355-357
• /
• 2002

The relationship between magnetic properties of BiPbSrCaCuO superconductor and externally applied magnetic field was studied to develop a magnetic field polarity sensor. The behavior was related to the magnetic flux trapped in the superconductor, which penetrates through the material by the external magnetic field. Some portion of the superconductor was changed to a normal state by the trapped magnetic flux. Electrical characteristics of the superconductor with trapped magnetic flux were extremely sensitive to the external magnetic field and showed different responses depending on the direction of the magnetic field.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.43 no.5
• /
• pp.795-801
• /
• 1994

The BiPbSrCaCuO superconductor was fabricated by diffusion of The dual layer composed of SrS12TCaS11TCuS12TOS1xT in upper layer and BiS12TPbSI0.3TCuS12TOS1yT in lower layer, and varified growh-mechanism of BiPbSrCaCuO superconducting phase. And, we produced optimum conditions of spread volume and each stage of sintering time were upper layer:Lower layer=1:0.2, 1:0.4, 1:0.6 and 24hr., 120hr., 210hr. From the result, the optimum conditions are spread volume(Upper layer:Lower layer=1:0.6), sintering time(210hrs.) at 820$^{\circ}C$.The BiPbSrCaCuO superconductor, fabricated optimum condition, showed zero resistance at critical temperature of 70k.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.500-502
• /
• 2000

BiPbSrCaCuO 계 초전도체에서 관측되는 자기부양효과에 대하여 연구를 수행하였다. BiPbSrCaCuO 계 초전도체에 산화은을 첨가한 시료와 첨가하지 않은 시료의 자기적 특성을 측정하여 자기부양효과의 메카니즘에 대하여 고찰하였다. toroidal자석에서 관측되는 자기부양 효과는 자석의 중심부분에서만 발생하며, 자석의 ring 부분에서는 관측되지 않았다. 이 결과는 본 연구의 자기 부양효과의 발생에는 자석의 형상 및 자속의 분포 형태와 밀접한 관련이 있음을 의미한다.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.55 no.4
• /
• pp.209-212
• /
• 2006

The electromagnetic effect observed in a BiSrCaCuO superconductor was studied. The electromagnetic properties of a $Ag_2O$ doped BiSrCaCuO superconductor and an undoped superconductor were evaluated to investigate the contribution of the pinning effect. It was confirmed experimentally that a large amount of magnetic flux was trapped in the $Ag_2O$ doped BiSrCaCuO than that in the undoped one, indicating that the pinning centers of magnetic flux are related closely to the occurrence mechanism of magnetic phenomena. It was considered that by adding $Ag_2O$, the area where normal conduction takes place increases and the magnetic flux penetrating through the sample increases. It also was considered that $Ag_2O$ acts to increase pinning centers of magnetic flux.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.65-68
• /
• 1999

A well oriented Bi2212 superconductor thick films were fabricated by screen printing with a Cu-free Bi-Sr-Ca-O mixture powder on a copper plate and heat-treating at 820-88$0^{\circ}C$ for several minute in air. During the heat-treatment, the printing layer partially melted by reaction between the Cu-free precursor and CuO of the oxidizing copper plate. In the partial melting state, it is believed that the solid phase is Bi-free phase and Cu-rich phase and the composition of the liquid is around Bi : Sr : Ca : Cu = 2 : 2 : 0 : 1. Following the partial melting, the Bi2212 superconducting phase is formed at Bi-free phase/liquid interface by nucleation and grows. With decreasing the Bi composition in the precursor powder, the critical temperature(T$_{c}$) of the fabricated Bi2212 thick film increased to about 79 K.K.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.5
• /
• pp.545-551
• /
• 2004

Magnetic suspension effect has been studied by using superconductor of BiPbSrCaCuO ceramics containing Ag$_2$O. Magnetic flux measurements of a toroidal magnet revealed a concave shaped field distribution with a null field along the axis of the torus at the point where the field reversed. The suspension effect was observed only for the Ag$_2$O doped and field cooled sample which is attributed to the enhanced flux pinning due to the field cooled condition. It has been cleared that Ag$_2$O acts as pinning center which plays an important role to the magnetic suspension effect. Magnetic repulsive force which affects a superconductor located in magnetic flux from toroidal magnet has been investigated. It has been concluded that the magnetic suspension effect arises from the interaction between the pinning effect and the diamagnetic effect.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.5
• /
• pp.429-434
• /
• 2003

The magnetic field sensor was fabricated with superconducting ceramics of BiPbSrCaCuO system. The sensor at liquid nitrogen temperature showed the increase of electrical resistance by applying magnetic field. Actually, the voltage drop across the sensor was changed from zero to a value more than 100 $\mu\textrm{V}$ by the applied magnetic field. The change of electrical resistance depended on magnetic field. The sensitivity of this sensor was 2.9 $\Omega$/T. The sensing limit was about 1.5${\times}$10$\^$-5/ T. The increase of electrical resistance by the magnetic field was ascribed to a modification of the Josephson junctions due to the penetrating magnetic flux into the superconducting material. Considering the observed properties of the superconductor with trapped magnetic flux, a magnetic sensor was fabricated to detect simultaneously both the intensity and the direction of the magnetic field.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.7
• /
• pp.788-792
• /
• 2004

The Electromagnetic properties in BiPbSrCaCuO superconductor was studied. In the measurement of current-voltage characteristics, a voltage across the superconducting sample was observed on applying an external magnetic field. The voltage continues to appear the removal of the magnetic field. The appearance of the voltage is ascribed to the trapping of magnetic flux. Depanding on the direction of appied magnetic flux less than $2.5\times{10}^-5$ T, the voltage in the magnetized sample increases or decreases. It is considered that mechanism of voltage occurrence can be explained by applying filament model.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.05b
• /
• pp.177-179
• /
• 2004

Suspension effect has been studied by using superconductor of BiPbSrCaCuO ceramics containing $Ag_2O$. It has been cleared that $Ag_2O$ acts as pinning center which plays an important role to the suspension effect. Magnetic repulsive force which affects a superconductor located in magnetic flux from toroidal magnet has been investigated. It has been concluded that the suspension effect arises from the interaction between the pinning effect and the diamagnetic effect.