• Journal of the Korean Society of Marine Environment & Safety
• /
• v.14 no.1
• /
• pp.45-54
• /
• 2008

"Summer Deadweight Tonnage(SDWT)" is used as the criteria of the berthing capacity when establishing port entry limits under current guideline. The important factors affecting to the maximum ship size of possible berthing are mass, length and breath of the ship rather than deadweight. Therefore this guideline should be modified to ensure safety and efficient operation of berth. This study aimed to propose a rational guideline to adjust the berthing capacity. In order to decide proper berthing capacity, three berths of Port of Ulsan were selected and systematic evaluations for the safety of passage transit, berthing maneuvers, ship motions at berth and stabilities of structures were conducted. Small changes of ship size had little effect on those characteristics and little significant differences were found according to the increase of ship size at the same displacement. The evaluation results of the increasement of 50% of berthing capacity at 20,000 DWT, 25% at 40,000 DWT and 13% at 150,000 DWT were within the design criteria in which the berths were built. Therefore, if the channel width, diameter of turning circle, berth length and mooring arrangements are satisfied with the criteria, the current berth limitations should be adjusted by the displacement. as substitute for the deadweight.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.11a
• /
• pp.149-150
• /
• 2022

External forces acting on the mooring facilities include wave, wind, current, and ship's kinetic energy. In particular, the ship's kinetic energy is changing as the ship become larger, and larger carrying capacity. It was intended to analyze the berthing velocity measurement data at on tanker terminals equipped with a DAS (Docking Aid System) through statistical means and algorithms and use it as basic data for safer and more efficient pier design and pilotage.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.08a
• /
• pp.3-13
• /
• 2004

The total tug capacity needed for berthing/de-berthing operations of a ship may vary depending on the ship type, size, loading conditions, and environmental circumstances. Traditionally, total tug capacity is determined based on the local guidelines of port authorities or on the rule of thumb. However, the social demands for the enhancement of ship safety at harbor and the economical demands for the cost-effectiveness of tug usage makes it necessary for port authorities to develop more reasonable and detailed guidelines on tug usage which takes various conditions into account. In this paper, the method to estimate the optimum tug capacity of VLCC is suggested by considering various ship conditions such as its size, loading conditions, and environmental circumstances such as wind, wave, tidal currents, and geographical characteristics of a terminal. This method is applied to a VLCC terminal located in Gwang-Yang Harbor of Korea and the results are compared with the local guidelines of the harbor, which shows that there may be a room for the amendment of local guidelines on tug usage.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.1
• /
• pp.67-73
• /
• 2016

This study analyzed the state of the vessels which were using the berth for dangerous goods more than its carrying capacity in the major dangerous cargo handling port of Ulsan in Korea, The result of the analysis showed that a ship which has 3 times more than the maximum berthing capacity was moored at berth. Accordingly, a simulation model for 50,000 DWT berth was built and carried out the mooring safety analysis with 50,000 DWT, 70,000 DWT and 100,000 DWT vessels by mooring assessment program. The evaluation was carried out according to the standard environment presented in OCIMF standards. 50,000 DWT vessel was evaluated to meet the acceptable criteria but, 70,000 DWT and 100,000 DWT vessels exceeded the acceptable limit as per external conditions. Consequently, safe mooring guidelines were suggested and also proposed the building of common 'Mooring safety guideline' for port with assessment of different cases.

• Journal of Navigation and Port Research
• /
• v.28 no.7
• /
• pp.609-617
• /
• 2004

The total tug capacity needed for berthing/unberthing operations of a ship may vary depending on the ship's type, size, loading conditions, and environmental circumstances. Traditionally, total tug capacity is determined based on the local guidelines of port authorities or on the rule of thumb. However, the social demands for the enhancement of ship safety at harbor and the economical demands for the cost-effectiveness of tug usage makes it necessary for port authorities to develop more reasonable and detailed guidelines on tug usage which takes various conditions into account. In this paper, the method to estimate the optimum tug capacity of VLCC is suggested by considering various ship conditions such as its size, loading conditions, and environmental circumstances including wind, wave, tidal currents, and geographical characteristics of a terminal. This method is applied to the VLCC terminal located in Gwang-Yang harbor of Korea and the results are compared with the local guidelines of the harbor, which shows that there may be a room for the amendment of local guidelines on tug usage.

• Journal of the Korean Institute of Navigation
• /
• v.11 no.1
• /
• pp.39-65
• /
• 1987

Since the middle of 1950's, containerization has been rapidly spread over the world in virtue of great merits providing to interensts, and the fundamental changes in port management and prot operations are resulted. As the container terminal is a complex system which is consisted of various subsystems, the treatment for improving the productivity is required in a comprehensive fashion, both in each of its parts and as an integrated system. This paper aims to make an intensive analysis of the Busan Container Terminal system, especially focusing on its subsystems such as ship operation system, storage system and transfer system. First of all, the intrinsic capacity of various subsystems is calculated and it is checked whether the current operation is being performed effectively through the formal analysis. Secondly, the suggestion is presented to improve the operation by considering the throughput that the port of Busan will have to accept in the near future. The results are as follows; 1) As the inefficiency is due to the imbalance between various subsystems at Busan terminal, transfer equipment level must be up to 31% for straddle carrier and 67% transfer crane above all. 2) The yard capacity must be increased by reducing the free dwell time of containers in order to accept the traffic volume smoothly in the near future. 3) The better way to reduce the port congestion is to change berthing rule from the FIFP to the Pre-allocated system by considering the ship arrival pattern.

• Journal of Ocean Engineering and Technology
• /
• v.13 no.3B
• /
• pp.116-126
• /
• 1999

The purpose of this study is to analyze the economic aspect of sea transportation system between Inchon and Youngjong island in which Inchon international airport is being constructed. Total demand of sea transportation arising from in the airport and Yongyu Muwi leisure complex was estimated. To select optimum transportation route, environmental conditions in and around Inchon harbour and Youngjong island including the change of water depth by tide current, fog, rain, wind adn typhoon, ets., were investigated. The preliminary consideration on ships (size, velocity, transport capacity, price), routes, operational modes, terminals and berthing facilities were carried out. The transportation cost per passenger by sea transportation system was estimated to compare with that of land transportation system. It was found that sea transportation system proposed is competitive to the transportation system.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.2109-2112
• /
• 2007

독도는 울릉도에서도 동남쪽으로 약 87.4km 떨어져 외해의 영향을 많이 받고 있는 지역이지만 방파제 등 외곽시설이 전무하여 평상파랑에도 접안이 어려운 경우가 많아서 독도 관광자원 활용도 및 편의시설 제공면에서 많은 어려움이 있다. 이에 본 연구에서는 독도 접안시설의 전면에 최근 국내에 본격적으로 도입되고 있는 부방파제(floating breakwater)를 설치할 경우 고정식 방파제 설치에 따른 문제점을 충분히 개선할 수 있다고 판단하여, 부방파제 설치에 따른 기술적인 타당성과 부두 이용률 개선효과 등을 연구 하였다. 독도의 접안시설은 해역이 동도와 서도에 의해 북쪽은 일부 차폐되고 남쪽은 직접 노출되어 있는 지리적 특성이 있어 주 파향인 남쪽계열의 8개 파향(SE, SSE, S, SW, SSW, WSW, W, WNW)의 평상파 제어가 가능하도록 방파제를 배치하였고, 이에 따른 부두 이용률 검토결과 부방파제를 설치할 경우 남쪽계열 파랑에 대하여 현상태에 비하여 부두 이용률이 대략 2배정도 증가되는 것으로 나타났으며, 부방파제 계류시스템의 안정에 대해서도 부체에 영향을 주는 외력에 대하여 계류체인의 길이와 Anchor Block 자중의 규모를 적당히 조정하면 충분히 안정한 것으로 검토되었다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.5
• /
• pp.445-453
• /
• 2020

The use of tugboats for the safe berthing/unberthing of ships is the most crucial factor in the safe and efficient operation of the harbor. However, the adequate number and size of tugboats that should be held based on the characteristics of the port have not been investigated in detail, which causes disputes between involved parties. Therefore, the suitable number of tugboats and the ratio of the tugboat horsepower were determined in this study using simulation techniques, with focus on Ulsan Port. First, the ship and tugboat-operating models were designed for simulation application. Next, the input variables defined in the model design were standardized in an inputtable form using ARENA software. In addition, the arrival and division process of the ship was designed and simulated as an ARENA model. Finally, the simulation results for six scenarios showed that an effective tugboat operation could be achieved when 42 tugboats were held at Ulsan Port.

• Journal of Korea Port Economic Association
• /
• v.23 no.2
• /
• pp.109-120
• /
• 2007

The purpose of this paper is to verify the two problems(normalization for the different inputs and outputs data, translation invariant for the negative data) which will be occurred in measuring the seaport DEA(data envelopment analysis) efficiency. The main result is as follow: Normalization and translation invariant in the BCC model for measuring the seaport efficiency by using 26 Korean seaport data in 1995 with two inputs(berthing capacity, cargo handling capacity) and three outputs(import cargo throughput, export cargo throughput, number of ship calls) was verified. The main policy implication of this paper is that the port management authority should collect the more specific data and publish these data on the inputs and outputs in the seaports with consideration of negative(ex. accident numbers in each seaport) and positive value for analyzing the efficiency by the scholars, because normalization and translation invariant in the data was verified.