• Applied Chemistry for Engineering
• /
• v.22 no.4
• /
• pp.444-446
• /
• 2011

Nanosized polystyrene (PS) particles with the narrow size distribution were synthesized from styrene monomer at the presence of the surfactant (polyvinylpyrrolidone, PVP), the solvent of 95 % alcohol, and the initiator of benzoyl peroxide (BPO). Since the emulsion polymerization method was applied, many factors could have effects on the size of PS particles during polymeric process. Aside from the concentration of monomer, surfactant and initiator, the factors such as the stirring speed and the ultrasonic radiation were mainly studied. By adjusting the radiating time, PS particles with their size of about 400 nm were synthesized.

• Resources Recycling
• /
• v.20 no.3
• /
• pp.68-76
• /
• 2011

For the separation of aluminum and iron from platinum mixtures, extraction resins were synthesized and separation efficiencies were compared with those by commercial one, $P_{204}$. During synthesis, the suspension polymerization method was adopted with D2EHPA as an extractant. Also, benzoyl peroxide as a starter was divided into 3parts and injected for the uniform size and dispersion of resin particles. Comparison tests resulted in 100% separation of Fe and Pt for both synthetic and $P_{204}$ resins. In case of Al and Pt, synthetic and $P_{204}$ resin gave extraction efficiencies of 99.9% and 98.9%, respectively. Difference in extractant contents of synthetic resin(61.8%) and $P_{204}$(60%) was considered to give differences in separation efficiencies of aluminum and iron elements. For both resins, separation efficiencies of Al and Fe increased up to $55^{\circ}C$. According to FT-IR analyses of both resins, specific peaks of D2EHPA and crosslinked polystyrene were identified at the wavenumber of $1000cm^{-1}$ and $2900cm^{-1}$ respectively.

• Proceedings of the Korea Environmental Mutagen Society Conference
• /
• 2003.05a
• /
• pp.84-85
• /
• 2003

• CELLMED
• /
• v.10 no.2
• /
• pp.15.1-15.9
• /
• 2020

Introduction: Buthūr Labaniyya (Acne vulgaris) is a multifactorial disorder of the pilosebaceous units characterized by non-inflammatory and inflammatory clinical lesions. Several Unani medications have been used for centuries to treat acne. Objectives: Evaluation of safety and efficacy of Tila-i Muhāsā in patients with acne vulgaris Materials and Methods: This clinical study was conducted in patients with acne vulgaris. Patients applied Tila-i Muhāsā or 5% Benzoyl Peroxide (BPO) once daily for 6 weeks. Assessment of efficacy was carried out by Global Acne Grading System (GAGS) and Patient Global Assessment (PGA) scores. In addition, overall severity of acne was evaluated on a 5-point Cook's acne grading scale using photographic standards. Assessment of safety was performed through adverse drug reactions, local dermal tolerability, vital signs, and routine laboratory investigations. Results: A total of 60 patients (30 in each group) completed 6 weeks of treatment. The mean percentage reduction in GAGS score at 6 weeks from baseline in Unani group (66.97%) and BPO group (59.09%) was statistically significant (P<0.0001). After 6 weeks of therapy, the mean percentage reduction in PGA score compared to baseline in Unani group (57.44%) and BPO group (50.23%) was statistically significant (P<0.0001). No serious adverse events were reported in both groups; however, mild adverse events occurred more frequently in BPO group (30%) compared to Unani group (10%). Conclusion: Tila-i Muhāsā was found to be effective and safe in the treatment of acne vulgaris. However, further clinical studies with larger sample size and longer duration of therapy need to be conducted.

• Polymer(Korea)
• /
• v.34 no.1
• /
• pp.14-19
• /
• 2010

Applying acrylic silane monomer for determent of weathering damage of stone cultural assets from various sources was investigated to improve inorganic affinity of polymer impregnated to the stone for conservation treatment using impregnation of acrylic polymers under pressure. Radical polymerization was carried out with various mixture ratios of methacrylate (MMA), as the base monomer, and vinyl trimethoxy silane (VTMS). Subsequently, according to the changes of glass transition temperatures, average molecular weights, and storage moduli of the obtained copolymers, the case of adding 1 wt% of benzoyl peroxide, polymerization for 8 hrs, and mixing 5 mol% of VTMS to MMA was the optimum condition of monomer ratio and polymerization. Practically, fresh granites collected in domestic site and weathered stones were treated by following the obtained result above, and then, the moisture absorption, impact, acid resistance, and adhesion properties of the treated stones were compared to those of the corresponding stones treated with MMA only. It was found that those properties of the stones treated with PMV5 were considerably improved.

• Membrane Journal
• /
• v.23 no.3
• /
• pp.220-225
• /
• 2013

Hydrophilic monomers were polymerized for lamination on polyvinylidene fluoride (PVDF) membrane surface for hydrophilization of the membranes. Hydrophilization reduced the contact angle from $95^{\circ}$ to $55^{\circ}$ and enhanced the water flux by 10 times while it reduced the bovine serum albumin (BSA) adsorption amount to 1/4 level. Thermal polymerization process was optimized by examining several operation parameters. Dimethyl oxobuthyl acrylamide (DOAA) showed the best effect due to its better hydrophilicity than others. Increase of amount of monomer enhanced the performance until the optimum concentration of 30 wt%, beyond which excess amount of monomer resulted in homopolymerization to deteriorate the performance. Azobis (isobutyronitrile)(AIBN) initiator has greater activation temperature range than benzoyl peroxide (BPO) and it showed better hydrophilation performance. Two stage lamination process, application of initiator followed by monomer addition, was more effective than one stage process, addition of initiator and monomer at once, which still reduced the contact angle but also reduced the water flux by pore blocking phenomena.

• Applied Chemistry for Engineering
• /
• v.1 no.2
• /
• pp.232-239
• /
• 1990

${\gamma}$-Glycidoxy propyl trimethoxy slilane, CTBN rubber(carboxyl terminated butadiene acrylonitrile rubber) and GMA(glycidyl methacrylate) were reacted with the surface of silica one by one in existence of TEA(triethylamine) or BPO(benzoyl peroxide). The amount of reactant was 2.5~5.8% of treated silica weight. The treated silica was mixed with epoxy resin and MTHPA(methyltetrahydrophthalic anhydride) in the range of 0~60% (wt. %) of total component. The flexural and thermal properties were tested for cured products. In filler content 35~55%, the using of silica treated with silane/rubber or silane/rubber/vinyl represented 25% higher flexural strength, 5% lower flexural modulus and 13% higher than mixing liquid rubber 3% with epoxy resin containing untreated silica.

• Elastomers and Composites
• /
• v.44 no.2
• /
• pp.175-181
• /
• 2009

The solution polymerization was conducted to synthesize pressure sensitive adhesive for polarizer film using acrylic monomers. 2-Ethylhexyl acrylate, butyl acrylate, acrylic acid were used as acrylic monomers, benzoyl peroxide as initiator, ethyl acetate as solvent. The ratio of monomers was 2-ethylhexyl acrylate: butyl acrylate: acrylic acid = 25:50:3.6 reflecting $-40^{\circ}C$ of glass transition temperature in the pressure sensitive adhesive. The amount of initiator was determined as 0.09% to monomer considering wetting power and initial tackiness. The ratio of monomer to solvent was determined as 1:1.7 considering wetting power and transmissivity. The transmissivity of pressure sensitive adhesive increased with decreasing both viscosity and molecular weight due to reducing of refractive index by low entanglement between molecules. In the measurement of pot life, it was found that the storage stability was good at 1:1.7 of monomer: solvent without large change of viscosity during 200 min.

• Elastomers and Composites
• /
• v.47 no.3
• /
• pp.216-222
• /
• 2012

In this study, p-acryloyloxybenzoic acid(ABA) was synthesized with p-hydroxybenzoic acid(HBA) and acryloyl chloride(AC). The synthesized ABA monomer was grafted onto ethylene-propylene-diene rubber(EPDM) in toluene using benzoyl peroxide(BPO) as an initiator. The structures of ABA and EPDM-g-ABA were characterized by FT-IR, $^1H$-NMR, and $^{13}C$-NMR spectrometer. The graft ratio of EPDM-g-ABA increased with increasing the concentration of the initiator and the monomer. Mechanical properties such as tensile strength and compression set of the EPDM-g-ABA were improved with increasing the graft ratio. The $T_g$ and initial decomposition temperature were also increased with increasing the graft ratio.

• Journal of the Korean Applied Science and Technology
• /
• v.20 no.2
• /
• pp.141-147
• /
• 2003

Oxidized polyethylene wax is obtained by oxidation of polyethylene wax and it is composed of various chemicals, e.g., fatty acid, alcohol, ketone and ester. The application of oxidized polyethylene wax is determined by the composition of these chemical substances. In this basic study we observed the basic reaction parameters of time, temperature, oxygen concentration and catalysts on the oxidation reaction of low molecular weight polyethylene(PE wax) by analyzing the acid value, physical and chemical properties of oxidized PE wax to develop a new oxidation process. Acid values are increased with temperature increase in the rage of $150^{\circ}C^{\sim}180^{\circ}C$ but decreased beyond 190$^{\circ}C$. Acid values are also increased with oxygen concentration. As the oxidation reaction proceeds the molecular weight and softening points of oxidation products are decreased by cracking reaction, but the viscosities are increased. To observe the crystallinity of oxidation products SEM experiment was performed. To obtain a high acid-value product in a mild condition, we adopted free radical catalysts and the acid value of the product using catalyst was higher than the product obtained without catalyst in the same reaction condition. The effective initiators were dicumyl peroxide(DCPO), t-butylperoxy-2-ethyl hexanoate(HOPO) and benzoyl peroxide(BPO) having long half-life.