• Korean Journal of Organic Agriculture
• /
• v.21 no.4
• /
• pp.501-522
• /
• 2013

This study has performed comparative analysis on benefit indicators in agricultural irrigation and drainage project cases between Korea and Japan. The irrigation and drainage project with publicity should do economic analysis of direct benefit factors as well as indirect benefit factors. However, traditional economic evaluations are used that benefit factors are lack of consistency and focused on direct benefits. Therefore, the purpose of this study was to develop indicators for the economic evaluation of irrigation and drainage projects. We conducted a case study between Korea and Japan. The resulting benefit factors was divided into direct factors and indirect factors. The direct benefit factors were increase in income, cost savings. The indirect benefit factors were protection of property due to flooding, agricultural promotion, aesthetic improvement. The implications of this study are that the indicators of economic analysis can be evaluated and easily applied. Moreover, these indicators could promote the feasibility of economic analysis.

• Textile Coloration and Finishing
• /
• v.32 no.2
• /
• pp.80-88
• /
• 2020

Supercritical fluid dyeing is a new alternative to the conventional aqueous process because of its environmental benefits. In this study, dyeing properties of Nylon 6 fabrics were investigated depending on dyeing temperature and pressure in supercritical CO₂ fluid dyeing system. In order to select the optimal condition for supercritical fluid dyeing of Nylon 6 fabrics, dyeing temperature and pressure were varied from 100, 110, 120℃, 200, 230, 260bar, respectively. The results of K/S values and levelling properties showed that the optimal dyeing condition for Nylon 6 fabrics was 110℃ and 230bar in the supercritical CO₂ fluid dyeing system. The washing fastness ratings of the dyed Nylon 6 fabrics under supercritical medium were good for both fading and staining except for staining on nylon.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.11a
• /
• pp.949-952
• /
• 2006

An understanding of rheological property on cement paste is one of the important factor to design concrete such as High-fluidity Concrete (HFC) for a specific application. The HFC is a specially proportioned hydraulic cement concrete that enables the fresh concrete to flow easily into the forms and around the reinforcement and prestressing steel without vibration and segregation. Use of this type of concrete for the concrete building construction, manufacture of precast, prestressed bridge elements provides the benefits of increased rate of production and safety, reduced labor needs, and lower noise levels. This paper presents the performance of rheological properties of cement paste incorporating domestic high-water-reduced-admixture (HWRA) for an Ultra-high-fluidity concrete (UHFC). Investigation was carried out on cement pastes with combinations of various dosages of HWRA and water/cement ratios.

• Journal of the Korean Society of Safety
• /
• v.23 no.6
• /
• pp.34-37
• /
• 2008

The composite materials are widely used in the many applications of industry as well as aerospace field because of their high specific stiffness and strength which benefits the material and provides potential energy savings. However, composite materials also have a low property about external applied impact. In this paper, impact tests were conducted on different sample types(glass, carbon and kevlar composite) to obtain information such as absorbed energy and composite deformation using an instrumented impact test machine (DYNATUP 8250). 3 type samples were compared to experimental results. The data from impact test provided valuable information between the different type samples by wet lay up. This paper shows results of that kevlar composite has larger absorption energy and deformation than others.

• The Korean Journal of Air & Space Law and Policy
• /
• v.14
• /
• pp.87-110
• /
• 2001

This Article examines a structure of two Conventions of Space Station, compares 1988 Convention and 1998 Convention, and tries to apply "model" to it. The structure of 1988 Convention shows us three phases: the Convention as a framework, the bilateral memorandum of understanding and the legislation by domestic process of United States. There were many advantageous provisions for United States. In 1998 Convention, however, those provisions are dampened and provisions become impartial, for example, the criminal jurisdiction, the right of intellectual property and the codes of conducts in Space Station. On the other hand, we sets the "model" up, that is "input of national benefits and ideas ${\Rightarrow}$ process of law-making ${\Rightarrow}$ output of common benefits, universal ideas and wastes." In the case of applying this "model" to 1988 and 1998 Conventions, we are convinced of enough possibility to understand and explain the legal system of Space Station by this "model." This result awakes us that study of legal system of Space Station according to the "model" influences the fundamental theory of International Law Study: the relation between international law and domestic law. This "model" has possibility to change the theory of relation between from "international law and domestic law" to "domestic law and domestic law through international legal system." In the end, we should reconsider on "policy-oriented jurisprudence" by professor McDougal to use his key words for explanation of concepts in the "model," because his theory contains important suggestions to the study of law-making process and legal system for outer space activities in the near future.

• Korean Association of Arts Management
• /
• no.51
• /
• pp.191-219
• /
• 2019

Adoption of applicable law for the international trade of artworks is closely related to the results of lawsuits. Recently, starting with New York, the hub of the international artworks market, a modern, mixed-law is gradually being adopted more. It is difficult to designate an applicable law of an international trade of artworks through private laws regulations of relevant countries, and the public laws regulations must also be considered in relation to individual benefits and the public benefits to the relevant countries. With regards to the foreign relations issues, Korea's private international law embraces a so-called public order theory, and according to the Section 7 of the Act on the Private International Law and its enactment history, the compulsory provision, which seems appropriate for application to the corresponding matter, applies without regards to the selection of the applicable law. The Civil Act of Korea acknowledges bona fide acquisition of a cultural asset, in principle, if the Cultural Heritage Protection Act is not applicable. Moreover, a lost artwork is also a subject of bona fide acquisition; however, if the relevant artwork is either stolen or lost, the original owner has the right to demand the return of that artwork within 2 years of being stolen or lost according to the Section 250 of the Civil Act. Also, if the buyer purchased from a distributor specializing in the artworks, such as auction, open market or gallery, the buyer could request a compensation of the purchase price from the original owner, and if the buyer purchased through a private transaction, the buyer cannot demand a compensation of the purchase price and must return the artwork.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.38 no.2
• /
• pp.25-36
• /
• 2010

The generally known important functions of forests include air purification and the health benefits that humans can receive when relaxing and enjoying recreation in the forests. In recent years, people have appreciated the value of the natural environment but it is not easy to answer the question how much monetary value a natural environment has. Because environmental property is public property, which is not traded on the market, market prices cannot be established, so it is not easy to assess the currency value. Methods for estimating environmental property value have been studied by economists. The representative method for measuring environmental property value is a contingent valuation method, or CVM. Various methods have been researched and attempted along with the development and fusion of mathematics, statistics, and economics. Representative methods of CVM are single-bound and double-bound logit and probit methods. This study has been carried out to compare four estimates. Estimates are as follows: the lowest estimate is derived from a single-bound logit WTPmedian while the highest estimate is from double-bound probit WTPmean. While there are some preceding studies on price estimation and methods of measurement through CVM, they offer only partial comparisons. This study suggests four analytic methods and prices through 1,123 questionnaires. The results can be used for the subsequent comparison of estimate prices and the methods of measurement

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.1766-1784
• /
• 2011

In the past, station-area development projects were proceeded for modernizing the station facilities and improving the customer's convenience facilities by attracting private financing. But the site of station-are a development has a limitation that limits of benefits comparing with initial cost and absence of collateral by constructed the national property. For the advancing business value, merchandising facilities were adopted. There were many problems like coming the loss of city development opportunities. Now, station-area developments are considered the station and city plan. so, they are rapidly rised up the life in the station, need of making cultural space, improvement efficiency, combination and connectivity of transportation system and need of journey to Work Distance. Accordingly, this study suggests the station-area development projects by analysis of market conditions and forecast about housing and office that meets the trend of station-area development and secures feasible business value.

• Proceedings of the KSME Conference
• /
• 2001.06c
• /
• pp.263-268
• /
• 2001

MCPs means Micro Cellular Plastics. The micro-cells are generated in the products by the difference of dissolution through the pressure drop after super critical fluid of CO2 or N2 dissolves into polymer. We have developed injection molding process adopting MCPs and applied it to a broad range of injection molded thermoplastic materials and applications. It can prevent the leakage of impact strength and increase the thermal conductivity, moreover regulate the thermal conductivity. Then we can develop the high strength foaming plastics. Also, it can be gained a competitive advantage by utilizing its processing benefits, e.g. the lightweight products and significant reductions in material consumption.

• Journal of the Korea Institute of Building Construction
• /
• v.6 no.4 s.22
• /
• pp.93-98
• /
• 2006

Admixture materials are used in mixing concrete or mortar to improve quality and performance of the concrete. This study examines the potential use of talc as a substitute for cement, the benefits of recycling waste resources for economical efficiency and quality improvement of concrete. The test was carried out by replacing the plain mix with fine grains of talc at the rate of 10%, 20%, and 30%. Talc was divided into three groups depending on the degree of pulverizing. For wet concrete, porosity, slump, bleeding per unit, and setting time by penetration resistance were measured; similarly, for dry concrete, strength and watertight Property were tested. Test results showed that the amount of bleeding and setting time could be shortened, but the strength and watertight proofing severely deteriorated. However, at the replacement rate of 10%, talc showed equal performance with the plain at all degrees of pulverization, which suggests its potential use as admixture material.