• Journal of Korea Technology Innovation Society
• /
• v.16 no.3
• /
• pp.630-649
• /
• 2013

Korea Meteorological Administration has promoted the next generation urban and rural smart weather service project. The purpose of this project is to provide the necessary information to urban and rural districts by using the subdivided meteorological information. This study attempts to assess the value of the next generation urban and rural smart weather service project by using contingent valuation method. According to estimating result, annual mean willingness to pay per household for the next generation urban and rural smart weather service project is 2,947 won.

• Journal of Preventive Medicine and Public Health
• /
• v.36 no.3
• /
• pp.230-238
• /
• 2003

Objectives : To estimate the value of statistical life (VSL) and health damage cost on theoretical mortality estimates due to environmental pollution. Methods : We assessed the health risk on three environmental problems and eight sub-problems. Willingness to pay (WTP) was elucidated from a questionnaire survey with dichotomous contingent valuation method and VSL (which is the division of WTP by the change of risk reduction) calculated from WTP. Damage costs were estimated by multiplying VSL by the theoretical mortality estimates. Results : VSLs from death caused by air pollution, indoor air pollution and drinking water contamination were about 0.3, 0.5 and 0.3 billion won, respectively. Damage costs of particulate matters ($PM_{10}$) and radon were higher in the sub-problems and were above 100 billion won. Because damage cost depends on theoretical mortality estimate and WTP, its uncertainty is reduced in the estimating process. Conclusion : Health damage cost or risk benefit should be considered as one scientific criterion for decision making in environmental policy.

• Journal of Labour Economics
• /
• v.31 no.1
• /
• pp.59-103
• /
• 2008

The purpose of this study is to estimate the effectiveness of vocational training for the unemployed. The results show that the unemployed who received vocational training commended better performances than those unemployed without any vocational training in respect to the duration of job-seeking period and the success rate of obtaining a job, however no significant change can be found in their wage level after holding a job between the two groups. It can be seen from the cost-benefit analysis, although the trained unemployed show better performance than the untrained unemployed, those that were trained by the Korea Chamber of Commerce and Industry(KCCI) do not show better performance than those that were trained through a private vocational train school since the training cost is much higher in the KCCI.

• Asian Journal of Business Environment
• /
• v.14 no.2
• /
• pp.11-18
• /
• 2024

Purpose: The purpose of this study is to empirically evaluate the unintended welfare losses induced by paid sick leave, examine the severity of the unintended moral hazard loss caused by paid sick leave, and evaluate how much moral hazard cost society can accept to obtain paid sick leave benefits. Research Design, Data and Methodology: We examine the Medical Expenditure Panel Survey data collected in 2013 and 2014 by employing a panel probit analysis to control for individual heterogeneity. Results: The estimation result shows that the probability of absence due to paid sick leave increases from 4.91% to 7.84%. Among them, excluding the probability of increasing absence from 1.29% to 2.69% due to the actual disease, the probability of absence due to the moral hazard was estimated to be 2.41% to 6.49% in the proposed models. Based on the result, if we evaluate the increase in absence caused by moral hazard as a social cost, the estimated cost is approximately $174 to $297 per worker per year. Conclusion: Considering these expected costs, our society can obtain the access benefit from paid sick leave if we are willing to accept the moral hazard cost.

• Journal of Korean Society of Forest Science
• /
• v.66 no.1
• /
• pp.68-73
• /
• 1984

Modern society has required to make maximization of the public benefit for forests. The increased public interest and concern for forests have been resulted from high mechanization of industrial activity associated with development of national economy, expansion of urban population, and necessity of more Leisure time caused by improvement of standard living condition. Attention shifted to the managing of forest (and on the basis of multiple use concept, achieving both public benefit and economic function. Management standards and control must be strengthened on all operations to encompass the various forest resources; outdoor recreation, watersheds, wildlife and fisheries, timber, rangeland, and aesthetic values. Particularly, in order to determine public interests and balance the needs in relation to available resources, more research is essential to develope and activate quantification of these intangeble forest resource values.

• Journal of Environmental Impact Assessment
• /
• v.7 no.2
• /
• pp.89-102
• /
• 1998

The purpose of this study is to seek AEI(Air Environmental Indices), PSI(Pollutant Standard Index) and the urban air quality control goal(the best available alternative energy program) by assessing the best ratio of energy types used in urban enterprises, based on harmful health effect and air quality standard and costs. This study is focused on an urban area(Puchun), where area sourcees are associated with heavy traffic, large population, and its industrial sources with large emissions. In the first step, air modeling, estimation of AEI and PSI, and benefit-cost analysis were carried out. In the second step, we assessed that 660 scenarios about the ratio of B-C oil, light oil and LNG used in urban enterprises with regard to air quality and cost. In the third step, the best available alternative energy program was selected for the ratio of energy species(B-C oil, light oil and LNG) by using the lexicographic method. From the emission analysis, main source of $NO_2$ is identified as industries and air quality is evaluated according to the ratio of B-C oil, light oil and LNG used in urban enterprise. The modeling data of TSP, $SO_2$, $NO_2$, CO, $O_3$, by ISC3 and PBM are respectively $118{\mu}g/m^3$, 0.027ppm, 0.025ppm, 2.0ppm, 0.55ppm in indurstrial area. That data are close to Environmental Air Quality Standard. By means of sensitivity analysis, we obtained the difference in concentration between the areas(Nae-dong, Joong-dong) according to the ratio of B-C oil, light oil and LNG used in the industries. From the result of alternatives assessment the lowest AEI value and cost, the ratio of B-C oil, light oil and LNG are 2.5%, 20%, 77.5%, respectively.

• Journal of Korean Society of Transportation
• /
• v.25 no.6
• /
• pp.19-31
• /
• 2007

When estimating the benefits from an investment project in the transportation sector, errors caused by many factors may exist. This study focuses on user equilibrium traffic assignment methods and stopping criteria. According to previous studies, when using a user equilibrium assignment model, the benefits of travel time savings can be effected by the relative gap value. As the stopping criteria decreases, the time needed for traffic assignment increases, so that lowering the criteria cannot be the best solution. Therefore, an effort is necessary to reduce this change rate and thus improve reliability. This paper considers three methods: reducing the links subject to benefit calculation, extracting sub-area O/D tables and networks, and applying the mean value of successive traffic assignment results. The results of the analysis show that the method using the mean value of five results is more proper than the other methods. Using the sub-area analysis method, if the study area is small the benefits of a project might be over- or under-estimated. This paper used a nationwide O/D table and network at peak time as a case study. The resulting patterns can differ according to basic data to be used in analysis. So further analysis using the data from metropolitan areas are needed.

• Korean Chemical Engineering Research
• /
• v.52 no.5
• /
• pp.564-573
• /
• 2014

Economic optimization of cumene manufacturing process to produce cumene from benzene and propylene was studied. The chosen objective function was the operational profit per year that subtracted capital cost, utility cost, and reactants cost from product revenue and other benefit. The number of design variables of the optimization are 6. Matlab connected to and controlled Unisim Design to calculate operational profit with the given design variables. As the first step of the optimization, design variable points was sampled and operational profit was calculated by using Unisim Design. By using the sampled data, the estimation model to calculate the operational profit was constructed, and the optimization was performed on the estimation model. This study compared second order polynomial and support vector regression as the estimation method. As the sampling method, central composite design was compared with Hammersley sequence sampling. The optimization results showed that support vector regression and Hammersley sequence sampling were superior than second order polynomial and central composite design, respectively. The optimized operational profit was 17.96 MM$ per year, which was 12% higher than 16.04 MM$ of base case.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.2
• /
• pp.133-139
• /
• 2011

Estimation of biomass carbon stock is an important research for estimation of public benefit of forest. Previous studies about biomass carbon stock estimation have limitations, which come from the used deterministic models. The most serious problem of deterministic models is that deterministic models do not provide any explanation about the relevant effects of errors. In this study, the effects of location errors were analyzed in order to estimation of biomass carbon stock of Danyang area using Monte Carlo simulation method. More specifically, the k-Nearest Neighbor(kNN) algorithm was used for basic estimation. In this procedure, random and systematic errors were added on the location of Sample plot, and effects on estimation error were analyzed by checking the changes of RMSE. As a result of random error simulation, mean RMSE of estimation was increased from 24.8 tonC/ha to 26 tonC/ha when 0.5~1 pixel location errors were added. However, mean RMSE was converged after the location errors were added 0.8 pixel, because of characteristic of study site. In case of the systematic error simulation, any significant trends of RMSE were not detected in the test data.

• Korean Association of Arts Management
• /
• no.53
• /
• pp.101-125
• /
• 2020

This paper presents the problems and improvement methods in estimating demand and benefit, which have been controversial in the feasibility study of building cultural facilities. Although there are justifications for supplying cultural facilities by expanding leisure time and increasing income, the economic burden from the insolvent operation after construction is high. Feasibility studies can prevent these problems in advance. In order to estimate the demand for cultural facilities, similar facilities were selected and the gravity model was used to estimate the demand. In the future, it is necessary to prepare the criteria for setting the reference facility to increase the accuracy of the demand estimation. In addition, in the case of cultural facilities constructed through feasibility study, it is necessary to induce and enforce the disclosure of operational data and information, and to establish a database so that it can be used as a reference facility for demand estimation in future feasibility study on cultural facility. Accurate benefit estimation requires multiple CVM surveys. In addition to the current CVM survey, this paper suggest that supplementary online non-face-to-face surveys is considered. Furthermore, this research suggests that the use of video media for explanation of alternative materials for cultural facilities to be constructed because the WTP may be excessive due to lack of alternatives for survey respondents in the current CVM survey.