• 전기학회논문지
• /
• 제60권11호
• /
• pp.2021-2027
• /
• 2011

Recently the power system consists of the more complicated structure, due to increase of power demands. In this circumstance, the congestion and loss capacity in transmission line is also increased. Accordingly, the investment planning of transmission system is required to reduce the congestion and loss of the transmission line. This paper proposes a method to compute the congestion and loss costs which are the key elements in economic assessment of the power system planning. And the benefit of market participants in CBP (Cost Based Pool) is computed. To demonstrate the efficient of the suggested methods, these methods are applied to peak load system of 2016 in the 4th Basic plan of Long-Them Electricity Supply and Demand.

• Asian-Australasian Journal of Animal Sciences
• /
• 제7권1호
• /
• pp.49-55
• /
• 1994

This study was conducted to compare the of rearing native and cross-bred dairy cows and returns received from them. For this purpose, 144 cows of 132 household from 24 villages were randomly selected. of them, 96 were native cows and 48 were cross-bred cows. The study revealed that among the structure of cost components, labour charge occupied the major share in the total cost of milk production per litre. The total cost of rearing native and cross-bred cows was Tk. 14,155 and Tk. 19,854 per annum, respectively. The average net cost of milk production per litre was Tk. 14.12 for native cows and Tk. 0.52 and for cross-bred cows were Taka 3.40. The benefit-cost ratio of milk per litre was higher (1:1.33) in cross-bred cows than native ones (1:1.04). The study further showed that in comparing with bulk line cost, the price of milk per litre received by the farmers was higher in cross-bred cows than native cows. Therefore, the study recommends dairying with cross-bred cows as encouraging and viable commercial enterprise in Banfladesh.

• Earthquakes and Structures
• /
• 제21권5호
• /
• pp.505-514
• /
• 2021

A formulation based on structural reliability and cost effectiveness is proposed to provide recommendations to select the best retrofit strategy for schools with reinforced concrete frames and masonry walls, among three proposed alternatives. The cost calculation includes the retrofit cost and the expected costs of failure consequences. Also, the uncertainty of the seismic hazard is considered for each school site. The formulation identifies the potential failure modes, among shear and bending forces for beams, and flexure-compression forces for columns, for each school, and the seismic damages suffered by the schools after the earthquake of September 17, 2017 are taken into account to calibrate the damaged conditions per school. The school safety level is measured through its global failure probability, instead of only the local failure probability. The proposed retrofit alternatives are appraised in terms of the cost/benefit balance under future earthquakes, for the respective site seismic hazard, as opposed to the current practice of just restoring the structure original resistance. The best retrofit is the one that corresponds to the minimum value of the expected life cycle cost. The study, with further developments, may be used to develop general recommendations to retrofit schools located at seismic zones.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1584-1589
• /
• 2003

Simple and effectively developed learning control logic is used to control vibration of U type Tuned Liquid Damper system. The purpose of this paper is design optimal control system to deal with unknown errors from nonlinearity and variation that cost modeling difficulty in complex structure and is followed with the desired behavior. Finally this hybrid control method applied to U type Tuned Liquid Damper structure gives the benefit from better performance of precision and stability of the structure by reducing vibration effect. This research leads to safety design in various structure to robust unspecified foreign disturbances such as earthquake.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 춘계학술대회 논문집
• /
• pp.559-564
• /
• 1995

Feature based design approach is widely studied for the application of mechanical part design and process planning. Mechanical parts are associated with volumetric form features in nature. Therfore, one of the important characteristics that reside in the form feature research until now is that features have been studied in connection with CAPP for material removal. We studied the application of feature based design for ship structure design. Ship structure has interesting nature that tis distinct from mechanical parts. Among these are multiple cell structure, non-volumetric part and production by welding or assembling. An idea of applying feature based design paradigm for design, process planning, cost analysis and engineering calculation was shown. Non-manifold geometric modeler ACIS was adopted to fully benefit from the non-manifold nature of ship structure.

• 대한기계학회논문집A
• /
• 제28권11호
• /
• pp.1656-1663
• /
• 2004

As the structures become larger, higher and more complicated, the demand for safety level has increased. In recent years, TLD(Tuned Liquid Damper) proved to be a successful control tool for reducing structural vibrations. For this reason, the influence of some key parameters of the U-type TLD on the dynamic response is studied. And simple and effectively developed learning control logic is used to control vibration of U type Tuned Liquid Damper system. The purpose of this paper is design optimal control system to deal with unknown errors from non linearity and variation that cost modeling difficulty in complex structure and is followed with the desired behavior. Finally this hybrid control method applied to U type Tuned Liquid Damper structure gives the benefit from better performance of precision and stability of the structure by reducing vibration effect. This research leads to safety design in various structure to robust unspecified foreign disturbances such as windy-load and earthquake.

• 보건행정학회지
• /
• 제15권3호
• /
• pp.17-39
• /
• 2005

Social solidarity, equity in financing, and efficiency in administration have been core issues in the development of Korean health insurance reformation since 1988. This study is to investigate the trend of administrative cost in Korean National Health Insurance from various aspects. For the analysis of administrative cost, the expenditures of each insurance society and the National Health Insurance Corporation are divided into 4 items of (1) insurance benefit, (2) administrative cost, (3) an agency provision accounts, (4) other expenses, and then they are reorganized. The analyses based on 5 types of the health insurance administrative cost showed that efficiency in administration has been improved generally. We, however, should consider qualitative aspects such as customer's satisfaction with health insurance administration, prompt service, control of unjust expenditure (unjust claims), and provision of medical service including health consultation in assessing efficiency of administration. And, in order to connect the administrative costs of health insurance with efficiency, we need to give a fundamentally new definition, which can contain elaborateness of expenditure in details including the structure and evaluation method of administrative costs. It may be necessary to develop new indicators or analyzing methods hereafter.

• Earthquakes and Structures
• /
• 제11권4호
• /
• pp.583-607
• /
• 2016

One of the main applications of seismic risk assessment is that an specific design could be selected for a bridge from different alternatives by considering damage losses alongside primary construction costs. Therefore, in this paper, the focus is on selecting the shape of pylon, which is a changeable component in the design of a cable-stayed bridge, as a double criterion decision-making problem. Different shapes of pylons include H, A, Y, and diamond shape, and the two criterion are construction costs and probable earthquake losses. In this research, decision-making is performed by using developed seismic risk assessment process as a powerful method. Considering the existing uncertainties in seismic risk assessment process, the combined incremental dynamic analysis (IDA) and uniform design (UD) based fragility assessment method is proposed, in which the UD method is utilized to provide the logical capacity models of the structure, and the IDA method is employed to give the probabilistic seismic demand model of structure. Using the aforementioned models and by defining damage states, the fragility curves of the bridge system are obtained for the different pylon shapes usage. Finally, by combining the fragility curves with damage losses and implementing the proposed cost-loss-benefit (CLB) method, the seismic risk assessment process is developed with financial-comparative approach. Thus, the optimal shape of the pylon can be determined using double criterion decision-making. The final results of decision-making study indicate that the optimal pylon shapes for the studied span of cable-stayed bridge are, respectively, H shape, diamond shape, Y shape, and A shape.

• 한국항만경제학회지
• /
• 제26권3호
• /
• pp.42-55
• /
• 2010

본 논문의 핵심은 일정한 전용항만을 운용하는데 있어 발생되는 물유비용을 크게 3가지로 나누어 이들의 합계가 최소화 될 수 있는 선박톤수 별 연간 발주 항차 수를 최적화하는 것이다. 즉 항만에서 적항과 양항간을 오가며 발생되는 해상수송비용, 도착 선박이 항만에서 선석을 기다리며 발생되는 대기비용, 그리고 수입된 화물이 하역되어 야적장에 보관된 상태에서 발생되는 재고유지비용 등의 비용발생 행태가 대, 중, 소 3가지 선급별 연간 항차 수의 배정에 따라 상이한 만큼, 이들 비용의 합계가 최소화 될 수 있는 최적 항차 배정 의사결정이 요구된다. 이때 해상수송비용은 주어진 선급 별, 항만 별 요율로써 확정할 수 있고, 항만 대기비용은 시뮬레이션 모델로써 추정할 수 있다. 그리고 야적장의 화물 재고유지비용은 연간 평균재고량에 화물 별 단가(單價)와 이자율 등을 감안하여 추정할 수 있다. 포항제철(주)의 원료수입 전용부두를 운영하는 사례 분석 결과에서 규모의 경제 효과에 의한 해상수송비용을 최소화하기 위해 대형선박의 연간 항차 배정 율을 증가시킬 경우, 일정 비율을 지나면 선박 대기비용이 급격히 상승하고 야적장의 재고비용도 다소 상승되어 결국 총비용이 증가하는 것으로 나타났다. 따라서 현재의 전용항만 구조하에서 물류비용을 최소화하기 위해서는 중형선은 연간 총 배정 항차 수의 약 50% 정도의 비중으로, 대형선은 약 33% 정도, 그리고 소형선은 약 17% 내외로 구성하는 것이 최적인 것으로 나타났다. 물론 이러한 분석 결과는 추후 새로운 선석의 건설, 수입화종과 화물량, 단가 등의 변수에 따라 달라질 수 있다.

• 한국유기농업학회지
• /
• 제21권3호
• /
• pp.335-350
• /
• 2013

With the efforts to development of renewable energy technologies, and increasing awareness to environmental issues, the usage of wood pallets has been increasing every year since the introduction of wood pallet technology to the domestic market. until 2009, majority usage of pellet boiler was in the residential houses. In an effort to increase the distribution of wood pellet boiler to cultivation facilities with high usage of fuels, The Ministry of Agriculture and Forestry has launched a distribution project of wood pellet boiler for fuel usage as a part of the agricultural and fishery energy efficiency projects. Although only small number of farms with a heat-culturing facility have replaced from conventional boiler to pellet boiler. Although part of reason for low usage of pallet boiler is lack of understanding and information of it, the main reasons are high initial cost and uncertainty of its cost efficiency. Also, most people from agricultural industry don't realize it's significance in terms of environmental benefit due to lack of understanding in 'resource circulation' and 'adopting to climate change'. In this study, first, we did a cost-efficiency analysis of the farm which uses a diesel boiler to grow cucumber, tomato, paprika. Then we replaced the diesel boiler to a pallet boiler and measured its cost-efficiency again. By comparing the cost-efficiency of the diesel boiler with the pellet boiler, we analyzed the economic viability of pellet boiler. Then we analyzed viability of pallet boiler usage in terms of 'resource circulation' and 'adopting to climate change'. As a result of our analysis, we have found out that under the current system of government support, the energy usage varies depends of the types crops grown and the higher the energy use, the more cost efficient it is to use the pallet boiler. Also, it is economically viable to use the pallet boiler in terms of 'resource circulation' and 'adopting to climate change'.