• 대한조선학회논문집
• /
• 제32권3호
• /
• pp.83-97
• /
• 1995

본 논문의 목적은 종굽힘모멘트를 받는 선각거더의 최종강도를 계산하는 간이식을 도출하는 것이다. 먼저 기 제안된바 있는 계산식들을 조사 분석하였으며, 지금까지의 계산식 도출방법을 크게 해석적 방법, 경험적 방법 및 선형근사법의 3종류로 분류하였다. 선각거더는 종굽힘모멘트의 증가와 함께 압축플랜지의 붕괴와 인장플랜지의 항복에 의해 전체적으로 최종강도에 도달한다고 알려져 있다. 이때 선측부도 압축플랜지 부근에서는 붕괴하며, 인장플랜지 부근에서는 항복상태에 도달해 있는 경우가 많다. 그러나, 중립축부근에서는 여전히 탄성상태에 남아있는 것이 보통이다. 이같은 사실을 근거로 선각 횡단면에 걸쳐 적절한 응력분포를 가정하였으며, 이것으로부터 최종강도 계산식을 해석적인 방법으로 도출하였다. 본 계산식의 정도는 기존의 모형실험 및 수치해석결과와 비교하여 검증하였다.

• 대한조선학회논문집
• /
• 제53권4호
• /
• pp.336-342
• /
• 2016

H-CSR(Harmonized Common Structural Rules) integrating CSR-BC(Common Structural Rules for Bulk Carriers) and CSR-OT(Common Structural Rules for Double Hull Oil Tankers) came into effect in July of 2015, so that bulk carrier and double hull oil tanker should comply with this rules. So far, several studies for trend analysis of requirements of structure scantling based on H-CSR have been carried out briskly. However, those studies are rare to apply H-CSR in actual structural design of ships, especially bulk carriers. In this study, an automated system for compartment arrangement is used to search the design case that minimizes still water bending moment(S.W.B.M) in 38k bulk carrier designed by Far East Ship Design & Engineering Co. Ltd. Also, various structural design cases are considered by changing arrangement of structural members to reduce ship weight. The SeaTrust-Hullscan software developed by Korean Register is used to perform structural design of ships based on mother ship and proper design cases are selected by user. The DSA(Direct Strength Analysis) is performed to evaluate structural safety for the yielding and buckling analysis by using MSC Nastran software. The effect of weight reduction is verified by comparison of ship weight between mother ship and the selected design cases.

• 한국정밀공학회지
• /
• 제23권4호
• /
• pp.176-182
• /
• 2006

Although several artificial disc designs have been developed for the treatment of discogenic low back pain, biomechanical changes with its implantation were rarely studied. To evaluate the effect of artificial disc implantation on the biomechanics of functional spinal unit, a nonlinear three-dimensional finite element model of L4-L5 was developed with 1-mm CT scan data. Biomechanical analysis was performed for two different types of artificial disc having constrained and unconstrained instant center of rotation(ICR), ProDisc and SB Charite III model. The implanted model predictions were compared with that of intact model. Angular motion of vertebral body, forces on the spinal ligaments and facet joint, and stress distribution of vertebral endplate for flexion-extension, lateral bending, and axial rotation with a compressive preload of 400N were compared. The implanted model showed increased flexion-extension range of motion compared to that of intact model. Under 6Nm moment, the range of motion were 140%, 170% and 200% of intact in SB Charite III model and 133%, 137%, and 138% in ProDisc model. The increased stress distribution on vertebral endplate for implanted cases could be able to explain the heterotopic ossification around vertebral body in clinical observation. As a result of this study, it is obvious that implanted segment with artificial disc suffers from increased motion and stress that can result in accelerated degenerated change of surrounding structure. Unconstrained ICR model showed increased in motion but less stress in the implanted segment than constrained model.

• 한국강구조학회 논문집
• /
• 제18권5호
• /
• pp.515-524
• /
• 2006

강박스거더에 편심이 작용하면 단면은 뒤틀리고, 이로 인해서 종방향으로 뒤틀림 응력이 발생한다. 휨모멘트에 의한 휨응력 이외에뒤틀림으로 인한 추가되는 종방향 응력은 경우에 따라서는 무시할 수 없이 크기 때문에 설계단계에서 반드시 고려되어야 한다. 일반적으로 중간다이아프램을 설치하여 뒤틀림 변형 자체를 억제시켜 뒤틀림응력의 크기를 제안하는 방법을 이용하는데, 이때 휨응력에 비교하여 뒤틀림응력의 크기를 통상 5~10%정도로 제한한다. 현재 적용하는 중간다이아프램 설치간격에 대한 공식은 고전적인 BEF 이론을 바탕으로 유도되었는데, 이는지나치게 보수적인 설계를 유도하고있다. 이에 본 연구에서 강박스거더의 프레임형식 중간다이아프램에 대해 3차원 유한요소해석을 수행하여 분석한 결과, 현행 중간다이아프램 단면적 공식은 지나치게 큰 값을 요구하는 것으로 나타났다. 그래서 유한요소 해석결과를 회귀분석하여 설계 초기에 적용할 수 있는 개선된 프레임형식의 중간다이아프램 단면적 설계공식을 제안하였다.

• 한국지반공학회논문집
• /
• 제20권8호
• /
• pp.135-145
• /
• 2004

본 연구에서는 화강풍화토 지반상 unpropped diaphragm wall의 거동을 연구하기 위하여 과재하중의 이격거리를 변화시키면서 원심모형실험을 수행하였다. 원심모형실험시 지반굴착은 흙과 동일한 밀도로 혼합된 zinc chloride 용액이 배수되도록 밸브를 조작하여 실시하였으며, 굴착에 따라 발생하는 지반의 변형과 벽체의 변위 및 휨모멘트를 측정하였다. 수치해석은 대부분의 지반공학 문제에 적용할 수 있는 FLAC 프로그램을 이용하였다. 수치해석에서 모형지반은 Mohr-Coulomb 모델, diaphragm wall은 탄성모델을 사용하여 2차원 평면변형률 조건으로 해석을 수행하였다. 모형실험 결과 파괴면의 직선적인 형태로 파괴면내의 배면측 지반은 벽체를 향하여 하향의 변위를 일으키면서 벽체의 회전에 의해 파괴되었으며, 파괴면의 각도는 67∼74$^{\circ}$정도로 이론적인 파괴면의 각도보다 크게 평가되었다. 실험 및 해석 결과 지반의 최대침하량이 발생하는 위치는 잘 일치하였으며, 깊이에 따른 벽체변위는 선형적인 관계를 나타내었다.

• 한국가스학회지
• /
• 제18권2호
• /
• pp.10-15
• /
• 2014

본 연구에서는 원통형 중공롤러를 갖는 와이어 소 머신에 대한 변위와 응력강도 안전성 해석결과를 제시하고 있다. 유한요소법을 사용하여 세 개의 튜브 사이에 Y형상의 편위형 컬럼과 수직형 컬럼을 설치한 중공롤러에서 변형거동과 응력강도 안전성을 높인 중공롤러를 개발하고자 한다. 동일한 직경과 길이를 갖지만, 중량을 달리하는 중공롤러 모델에서 Y 형상의 편위형 및 수직형 중공롤러에 작용하는 변위거동 안전성은 중공롤러의 전체길이에 의해 더 많은 영향을 받는 것으로 나타는데, 이것은 중공롤러의 굽힘 모멘트와 밀접한 관련이 있다. 그러나, 중공롤러의 응력강도는 중량 차이가 크지 않을 경우 절단면의 형상에 의해 더 큰 영향을 받는 것으로 나타났다. 따라서, 중공롤러의 강도안전성을 높이고, 총중량을 낮추기 위해서는 Y형상을 갖는 중공롤러를 사용하는 것이 바람직함을 알 수 있다.

• Steel and Composite Structures
• /
• 제22권1호
• /
• pp.113-139
• /
• 2016

The nonlinear seismic responses of steel buildings with perimeter moment resisting frames (PMRF) and interior gravity frames (IGF) are estimated, modeling the interior connections first as perfectly pinned (PPC), and then as partially restrained (PRC). Two 3D steel building models, twenty strong motions and three levels of the PRC rigidity, which are represented by the Richard Model and the Beam Line Theory, are considered. The RUAUMOKO Computer Program is used for the required time history nonlinear dynamic analysis. The responses can be significantly reduced when interior connections are considered as PRC, confirming what observed in experimental investigations. The reduction significantly varies with the strong motion, story, model, structural deformation, response parameter, and location of the structural element. The reduction is larger for global than for local response parameters; average reductions larger than 30% are observed for shears and displacements while they are about 20% for bending moments. The reduction is much larger for medium- than for low-rise buildings indicating a considerable influence of the structural complexity. It can be concluded that, the effect of the dissipated energy at PRC should not be neglected. Even for connections with relative small stiffness, which are usually idealized as PPC, the reduction can be significant. Thus, PRC can be used at IGF of steel buildings with PMRF to get more economical construction, to reduce the seismic response and to make steel building more seismic load tolerant. Much more research is needed to consider other aspects of the problem to reach more general conclusions.

• Steel and Composite Structures
• /
• 제26권3호
• /
• pp.329-345
• /
• 2018

This paper systematically investigated the mechanical performance of the weak-axis cover-plate connection, including a beam end monotonic loading test and a column top cyclic loading test, and a series of parametric studies for exterior and interior joints under cyclic loading using a nonlinear finite element analysis program ABAQUS, focusing on the influences of the shape of top cover-plate, the length and thickness of the cover-plate, the thickness of the skin plate, and the steel material grade. Results showed that the strains at both edges of the beam flange were greater than the middle's, thus it is necessary to take some technical methods to ensure the construction quality of the beam flange groove weld. The plastic rotation of the exterior joint can satisfy the requirement of FEMA-267 (1995) of 0.03 rad, while only one side connection of interior joint satisfied ANSI/AISC 341-10 under the column top cyclic loading. Changing the shape or the thickness or the length of the cover-plate did not significantly affect the mechanical behaviors of frame joints no matter in exterior joints or interior joints. The length and thickness of the cover-plate recommended by FEMA 267 (1995) is also suitable to the weak-axis cover-plate joint. The minimum skin plate thickness and a design procedure for the weak-axis cover-plate connections were proposed finally.

• Earthquakes and Structures
• /
• 제18권4호
• /
• pp.407-421
• /
• 2020

In-place analysis for offshore platforms is essentially required to make proper design for new structures and true assessment for existing structures, in addition to the structural integrity of platforms components under the maximum and minimum operating loads when subjected to the environmental conditions. In-place analysis have been executed to check that the structural member with all appurtenance's robustness have the capability to support the applied loads in either storm or operating conditions. A nonlinear finite element analysis is adopted for the platform structure above the seabed and pile-soil interaction to estimate the in-place behavior of a typical fixed offshore platform. The SACS software is utilized to calculate the dynamic characteristics of the platform model and the response of platform joints then the stresses at selected members, as well as their nodal displacements. The directions of environmental loads and water depth variations have significant effects in the results of the in-place analysis behavior. The most of bending moment responses of the piles are in the first fourth of pile penetration depth from pile head level. The axial deformations of piles in all load combinations cases of all piles are inversely proportional with penetration depth. The largest values of axial soil reaction are shown at the pile tips levels (the maximum penetration level). The most of lateral soil reactions resultant are in the first third of pile penetration depth from pile head level and approximately vanished after that penetration. The influence of the soil-structure interaction on the response of the jacket foundation predicts that the flexible foundation model is necessary to estimate the force responses demands of the offshore platform with a piled jacket-support structure well.

• Asian-Australasian Journal of Animal Sciences
• /
• 제19권2호
• /
• pp.245-251
• /
• 2006

The aim of this study was to investigate the effects of caponization on the bone characteristics, biomechanical property and histology in Taiwan country chickens fed to market age of 26 wks. Male Taiwan country chickens $D{\times}L_2$ were caponized or sham-operated at 8 wks of age, and selected healthy sham-operated and completely caponized chickens (prominent degenerated comb) were selected at 16 wks old and fed to 26 wks old for the trials. Fifteen intact male chickens (Intact), sham-operated chickens (Sham) and caponized chickens (Capon) were assigned for trial 1, and sixteen Intact and Capon were assigned for trial 2. Results in trial 1 showed that the abdominal fat and relative abdominal fat weights of Capon were significantly heavier than Intact and Sham (p<0.05), while the tibia weight and relative weight were the lightest (p<0.05). The tibia breaking strength, bending moment and stress of Capon were the poorest among groups (p<0.05). The trial 2 produced the similar observation that Capon were significantly lighter than Intact (p<0.05) in the tibia weight, relative tibia weight and their biomechanical properties. On histological determinations, Capon showed a thinner cartilage end and fewer chondrocytes (about 50%) and trabecular, and bigger marrow cavity; while decreased hemopoietic cells number with increased adipocytes than Intact observed by H&E stain and at low magnification. At high magnification, Capon showed a decrease in the chondrocyte size by 33 to 50%, with smaller nucleus located near the cell membrane, and exhibited monocellular form chondrocytes. Capon also showed a less strongly acidic sulfated mucosubstance with weaker dyeing property within cartilage zone, and smaller chondrocytes size by Alcian blue stain.