• Nuclear Engineering and Technology
• /
• v.54 no.11
• /
• pp.4195-4208
• /
• 2022

In this study, operator habitability was numerically evaluated in the event of a fire at the main control bench board (MCB) in a reference main control room (MCR). It was investigated if evacuation variables including hot gas layer temperature (HGLT), heat flux (HF), and optical density (OD) at 1.8 m from the MCR floor exceed the reference evacuation criteria provided in NUREG/CR-6850. For a fire model validation, the simulation results of the reference MCR were compared with existing experimental results on the same reference MCR. In the simulation, various input parameters were applied to the MCB panel fire scenario: MCR height, peak heat release rate (HRR) of a panel, number of panels where fire propagation occurs, fire propagation time, door open/close conditions, and mechanical ventilation operation. A specialized-average HRR (SAHRR) concept was newly devised to comprehensively investigate how the various input parameters affect the operator's habitability. Peak values of the evacuation variables normalized by evacuation criteria of NUREG/CR-6850 were well-correlated as the power function of the SAHRR for the various input parameters. In addition, the evacuation time map was newly utilized to investigate how the evacuation time for different SAHRR was affected by changing the various input parameters. In the previous studies, it was found that the OD is the most dominant variable to determine the MCR evacuation time. In this study, however, the evacuation time map showed that the HF is the most dominant factor at the condition of without-mechanical ventilation for the MCR with a partially-open false ceiling, but the OD is the most dominant factor for all the other conditions. Therefore, the method using the SAHRR and the evacuation time map was very useful to effectively and comprehensively evaluate the operator habitability for the various input parameters in the event of MCB fires for the reference MCR.

• Explosives and Blasting
• /
• v.42 no.1
• /
• pp.23-33
• /
• 2024

Recently, various techniques and patented methods on blasting operation are being newly developed. In this study, test construction of the MDS blasting method was performed, and the fragmentation size and the occurrence rate of rocks exceeding 300mm were measured and analyzed in comparing to normal blasting method. Test construction was performed three times each for normal and the MDS at the same bench for each round, and fragmentation size(P80) and occurrence rate of rocks exceeding 300mm(S30) were measured using digital image processing. A sieve bucket was also manufactured on-site to sort oversized rock particles from muck piles, and their weights and equivalents were measured to calculate actual values. As a result, the fragmentation size decreased of 21.0% with the MDS compared to normal, and 100-S30 decreased of 10.1%, with actual values decreasing of 7.6%. Although there were variations in blasting effects for each round due to differences in rock quality at site, overall, the MDS proved to be more effective compared to normal blasting method under equivalent conditions.

• Journal of Hydrogen and New Energy
• /
• v.35 no.3
• /
• pp.310-317
• /
• 2024

In this study, Aimed to develop technology to ensure the safety of firefighters responding to hydrogen incidents and to review the performance of protective super absorbent polymer (SAP) that could help maintain the thermal protection performance of equipment with protective properties. Tests were conducted, including bench-scale and full-scale thermal exposure tests, to review the protective performance of SAP using firefighting garments commonly used by firefighters. The results showed that without SAP application, 2nd degree burn areas were measured at 9.4%, and 3rd degree burn areas at 7.7%. In contrast, when SAP was applied, the percentage of 2nd degree burn areas decreased to 7% on the lower body, and there was no temperature rise causing 3rd degree burns. Therefore, it is expected that by applying SAP to the outer surface of firefighter garments, even under temporarily high temperature conditions such as hydrogen jet flames, thermal damage to firefighters could be protected for a certain period.

• Journal of dental hygiene science
• /
• v.24 no.3
• /
• pp.152-159
• /
• 2024

Background: As interest in health increases, the number of people engaging in weight training to enhance muscle strength and muscle mass is on the rise. High-intensity weight training has been reported to induce tooth clenching habits, leading to tooth damage and temporomandibular joint (TMJ) abnormalities. Consequently, it is essential to investigate the impact of weight training accompanied by tooth clenching on oral health and to develop guidelines based on these findings. Methods: The study included male participants aged 25 years and older, comprising 15 non-exercisers and 15 professional fitness trainers who have been engaged in weight training for over 5 years. Data were collected using a self-administered questionnaire to gather information on age, exercise experience, total weight lifted in three major weight training exercises (deadlift, bench press, and squat), and teeth clenching habits. Additionally, examinations for tooth cracks and fractures, TMJ noise and pain, maximum mouth opening, occlusal force, and occlusal contact area were conducted. Results: Compared to non-exercisers, professional fitness trainers who have been engaged in weight training for over 5 years exhibited a higher prevalence of teeth clenching habits. While there were no significant differences between the two groups in occlusal contact area and the extent of tooth fractures, there were significant differences in occlusal force and the degree of tooth cracks. Furthermore, unlike joint noise and TMJ pain, the maximum mouth opening was significantly reduced in professional fitness trainers compared to non-exercisers. Conclusion: Our study suggests that the continuation of high-intensity exercise, which induces teeth clenching habits, may cause tooth damage and TMJ disorders.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.26 no.2
• /
• pp.427-436
• /
• 1999

Preservation of the remaining periodontal ligament cells on an avulsed tooth is very important to the successful outcome of replantation. HBSS is recommended as the most suitable storage medium for the avulsed tooth that cannot be replanted immediately. But their availability near the site of an accident is doubtful. The purpose of this in vitro study was to compare periodontal ligament cells stored in different storage media obtained easily on the spot. Human periodontal ligament cells were collected from the premolar teeth extracted for orthodontic treatment. Cells were cultured in ${\alpha}-MEM$ culture medium containing 20% FBS, at $37^{\circ}C$ 100% humidity, in a 5% $CO_2$ incubator. Cells were cultured in 96 well culture plate, $5{\times}10^4$ cells per well with ${\alpha}-MEM$ and incubated for 24 hours. After discarding the medium, those cells were cultured in ${\alpha}-MEM$ contained with 10% FBS, pasteurized milk, sterilized saline, unstimulated saliva and bench-dried state at $25^{\circ}C$ room temperature for 30, 60, 90, 120, 180 minutes respectively. And then each group was measured using MTT assay. The results were as follows. 1. Between the group of each time, there was statistically significant difference. Periodontal ligament cells viability was highest in pasteurized milk and was reduced stepwisely in sterilized saline, unstimulated saliva and bench-dried state(p<0.05). 2. between the time of each group, there was statistically significant difference(p<0.05) but was no statistically significant difference at 90-120 minutes in pasteurized milk and at 60-90 minutes and 120-180 minutes in sterilized saline(p>0.05). In conclusion, HBSS as storage medium of an avulsed tooth is not practical on the spot. Insteadily pasteurized milk can be recommended to maintain the periodontal ligament cells viability.

• Journal of Internet Computing and Services
• /
• v.5 no.5
• /
• pp.1-15
• /
• 2004

In this paper, we explain the design and implementation of GWB(Gene WorkBench), which is a web-based, integrated system for efficiently managing and analyzing genomic sequences, Most existing software systems handling genomic sequences rarely provide both managing facilities and analyzing facilities. The analysis programs also tend to be unit programs that include just single or some part of the required functions. Moreover, these programs are widely distributed over Internet and require different execution environments. As lots of manual and conversion works are required for using these programs together, many life science researchers suffer great inconveniences. in order to overcome the problems of existing systems and provide a more convenient one for helping genomic researches in effective ways, this paper integrates both managing facilities and analyzing facilities into a single system called GWB. Most important issues regarding the design of GWB are how to integrate many different analysis programs into a single software system, and how to provide data or databases of different formats required to run these programs. In order to address these issues, GWB integrates different analysis programs byusing common input/output interfaces called wrappers, suggests a common format of genomic sequence data, organizes local databases consisting of a relational database and an indexed sequential file, and provides facilities for converting data among several well-known different formats and exporting local databases into XML files.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.11
• /
• pp.1102-1110
• /
• 2008

This research was performed to analyze the characteristics of wood wastes from origin and to suggest grade-classification for them. Korean proximate analysis was conducted, and heating value, heavy metals and Cl concentrations were analyzed for gradeclassification. Wood wastes were sampled from forest, living, construction and demolition, and industrial areas with origin. Moisture content of most wood wastes was ranged in 5$\sim$10%. VS (volatile solids) and ash contents of them showed > 95% and < 5%, respectively. Most wood wastes except wood for growing mushroom permitted the standard (low heating value $\geq$ 3,500 kcal/kg) for refusederived fuel. CCA (Cr, Cu, As) concentration of wood wastes used in bench, wasted fishing boat, and railroad crosstie was higher than that of the other ones. Cl content showed approximately 1.3% in wood box for fish and $\leq$ 0.2% in the other wood wastes. Cl content of all wood wasted used in this research permitted the standard (Cl $\leq$ 0.2%, dry weight basis) for refuse-derived fuel. If the wood wastes were classified in 3-grade, plywoods would be in 2nd grade, and MDF (medium density fiber), wooden bench, painted electric wire drum, wasted fishing boat, and railroad crosstie be in 3rd grade.

• Korean Chemical Engineering Research
• /
• v.55 no.3
• /
• pp.419-425
• /
• 2017

In this study, the performance characteristics of the K-based sorbents (KEP-CO2P2, KEPCO RI, Korea) has been studied in relation with the heat exchanger structure and shape in a mixing zone of the carbonator in the bench-scale dry $CO_2$ capture process. Two types of heat exchangers (different structure and shape) were used in the carbonator as CASE 1 and CASE 2, in which the experiment has been continuously performed under the same operating conditions. During the continuous operation, working temperature of carbonator was 75 to $80^{\circ}C$, that of regenerator was 190 to $200^{\circ}C$, and $CO_2$ inlet concentration of the feed gas was 12 to 14 vol%. Especially, to compare the dynamic sorption capacity of sorbents, the differential pressure of the mixing zone in the carbonator was maintained around 400 to 500 mm $H_2O$. Also, solid samples from the carbonator and the regenerator were collected and weight variation of those samples was evaluated by TGA. The $CO_2$ removal efficiency and the dynamic sorption capacity were 64.3% and 2.40 wt%, respectively for CASE 1 while they were 81.0% and 4.66 wt%, respectively for CASE 2. Also, the dynamic sorption capacity of the sorbent in CASE 1 and CASE 2 was 2.51 wt% and 4.89 wt%, respectively, based on the weight loss of the TGA measurement results. Therefore, It was concluded that there could be a difference in the performance characteristics of the same sorbents according to the structure and type of heat exchanger inserted in the carbonator under the same operating conditions.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.3
• /
• pp.396-400
• /
• 2009

Dodok (Codonopsis lanceolata Bench. et Hook) root contains abundant pharmaceutical substances and is widely used as a food and a medicinal herb. To identify the major components, fermented Codonopsis lanceolata was analyzed for its chemical compositions prior to their pharmaceutical substances, which were used as the fundamental data. The contents of carbohydrate, crude protein, crude lipid and ash are 79.3%, 13.0%, 2.40% and 5.3%, respectively. The calories of fermented Codonopsis lanceolata was 390.5 kcal. Total dietary fiber was 47.4% of total carbohydrates. The protein was composed of 18 different amino acids. The contents of essential and non-essential amino acids were 8,118.18 mg and 10,913.42 mg. The K was the largest mineral followed by P, Ca and Mg, which means fermented Codonopsis lanceolata is alkali material. The contents of saturated fatty acids, monounsaturated fatty acids and polyunsaturated fatty acids were 37.76%, 3.84%, and 35.64%, respectively. Therefore, the amount of the total unsaturated fatty acid was higher than that of any other plant. The content of crude saponin in fermented Codonopsis lanceolata was 60.1 mg/g. It is expected that a follow up study on fermented Codonopsis lanceolata through development and evaluation of processed foods for their functional properties would provide useful information as a source of medicinal foods.

• Journal of Bio-Environment Control
• /
• v.28 no.4
• /
• pp.286-292
• /
• 2019

This study aimed to investigate the suitable of layer on growth of six baby leaf vegetables using existing facilities and equipment in rice seedling nursery. Three kinds of Lactuca(lettuce 'Jinppallola' and 'Romain white', and indian lettuce), two of Brassica(tatsoi and red tatsoi) and amaranth were used as the materials. After sowing, the rice seedling tray was placed in multi bench system($L120{\times}W60{\times}H195cm$, 10th floor), which were low(1st) layer above 15cm, middle(4th) layer above 115cm and high(7th) layer above 175cm apart from ground. Irrigation was sprayed 2~3 times a day using a automatic irrigation system. The growth characteristics and leaf color were investigated when leaf vegetables were reached the optimum size(within 10cm of plant height). During the culture periods(29th Jun.~31th Jul. 2017), daytime average temperature was $27.4{\sim}28.3^{\circ}C$ regardless of layers but solar irradiance was higher in the high-layer than low and middle-layer of 37% and 22%, respectively. The leaf length, leaf width and number of leaves in middle and high-layer have a tendency to increase but, fresh weight was different according to the layer. When the correlation between accumulation radiation and growth was analyzed, all of growth factor of Amaranth showed a high correlation and other cultivars showed correlation with each growth factors. As a result, It is suitable that amaranth and red tatsoi for high-layer, Indian lettuce and tatsoi for middle and high-layer and 'Romain white' for middle-layer. The growth of red lettuce 'Jinppallola' was good at low layer, but leaf color expression was poor. So the high layer is suitable for 'Jinppallola'.