• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.123-127
• /
• 2002

In order to set up the design rule of micro optical bench, optical coupling efficiencies of two sets of test benches are calculated. Simple linear connections of incoming and outgoing optical fibers with and without ball lenses are designed. Positional errors that are possible in actual fabrication processes are considered in the calculations and their tolerances are determined from 3dB conditions. For a simple fiber-to-fiber connection, the working distance is limited to $2.7\mu\textrm{m}$ and tilt error $5.8^{\circ}$. When ball lenses are located in front of each fiber, the working distance can be extended over $60\mu\textrm{m}$ , but the positional errors have the strong interaction among position parameters and thus should be considered simultaneously for tolerance design.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 2003년도 춘계 학술발표회 논문집
• /
• pp.697-702
• /
• 2003

실험실규모(0.5Nm$^3$/hr)의 이산화탄소 연속흡수분리장치의 실험결과를 바탕으로 Bench규모(5Nm$^3$/hr)의 이산화탄소 연속흡수분리장치 설계하였다. MEA용 이산화탄소 연속흡수분리 장치를 4개의 흡수탑과 2개의 탈거탑을 연결하여 각각 독립적으로 실험할 수 있도록 장치를 제작하고 실험변수에 따른 이산화탄소의 흡수분리효율을 측정하였다. 설치된 실험장치에 대하여 주어진 실험범위에서 실험한 결과, 이산화탄소 제거율이 45~100%에 존재함을 확인하였다. 실험결과와 설계기준을 고려한 scale-up factor는 설계결과와 실험결과를 종합하였을 때, 각각 1.00~1.85인 것으로 산출되었다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1999년도 춘계학술대회 논문집
• /
• pp.315-321
• /
• 1999

The railway signaling system consists of microcomputerized vital devices on board and ground, which are connected to one another by track circuits, and interlocking equipment for route control, The software plays a major role in these microcomputer-based vital systems. Therefore it is important to design the software and validate the required levels of safety and reliability To verify the conditions and functions of signaling logic, the laboratory prototype test bench, which consists of personal computers, VME system and Ethernet LAN, will be developed. In this paper general design of signaling system test bench for high-speed rail is described and some developed subprogram is presented.

• Journal of Microbiology and Biotechnology
• /
• 제22권7호
• /
• pp.923-929
• /
• 2012

Optimization of culture conditions for L-asparaginase production by submerged fermentation of Aspergillus terreus MTCC 1782 was studied using a 3-level central composite design of response surface methodology and artificial neural network linked genetic algorithm. The artificial neural network linked genetic algorithm was found to be more efficient than response surface methodology. The experimental $_L$-asparaginase activity of 43.29 IU/ml was obtained at the optimum culture conditions of temperature $35^{\circ}C$, initial pH 6.3, inoculum size 1% (v/v), agitation rate 140 rpm, and incubation time 58.5 h of the artificial neural network linked genetic algorithm, which was close to the predicted activity of 44.38 IU/ml. Characteristics of $_L$-asparaginase production by A. terreus MTCC 1782 were studied in a 3 L bench-scale bioreactor.

• 한국자동차공학회논문집
• /
• 제23권1호
• /
• pp.88-96
• /
• 2015

This paper is the first investigation on the evaluation methods of flow characteristics in the steady bench. For this purpose, several assumptions used in the steady flow evaluation are examined, comparing the measured and/or processed results by the conventional impulse swirl meter with the ones by the real velocity through a particle image velocimetry. The results show that the most questionable assumption is the solid rotation of swirl. With regard to this assumption, the flow characteristics by the conventional methods are distorted seriously by both of the eccentricity of the swirl center and non-uniform velocity profile along the cylinder radial direction. In addition, the cylinder axial velocity distribution also has the great effect on the flow characteristics.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2018년도 춘계학술발표대회
• /
• pp.317-319
• /
• 2018

최근 발생하는 데이터는 대용량이며, 형태가 다양하고 빠르게 생성되는 특징이 있다. 이러한 데이터는 CPU, 인메모리 기반인 기존의 데이터 처리 시스템에서 처리하는데 많은 시간이 소모된다. 이 문제를 해결하기 위해 GPU 기반 데이터 집약 시스템이 출현하기 시작했다. 하지만, 이러한 시스템의 성능을 종합적으로 측정하는 테스트 결과는 시스템마다 다른 기준으로 제공하고 있다. 이에 따라, 개발자 및 사용자는 성능 병목 현상을 탐색하고 해결하는 데 큰 어려움을 겪을 수 있다. 즉, 이러한 다른 기준으로는 개발자 및 사용자가 시스템의 통합적인 성능 비교 분석을 수행하기 힘들다. 이러한 문제를 해결하기 위해서, 본 논문은 원스탑 테스팅 프레임워크인 BenchGAD 를 제안하고자한다.

• Journal of Ship and Ocean Technology
• /
• 제7권1호
• /
• pp.29-35
• /
• 2003

Intensive experimental investigation has been conducted on the characteristics of model tank with intruded flow. The remaining flow inside tank contribute to the dynamic behavior and further closely related to the stability of vessel as well. To understand the importance of the trapped flow and its dynamic effects a series of systematic tests were conducted using a bench tester that could generate periodic roll motion and also complex motions of combined roll-heave-sway. To accommodate experimental conditions and to create three degree freedom of motions, a bench tester was fabricated and verified. Having similarities in terms of flow trapped inside tank, theoretical approaches for A.R.T. were applied to the study. The major parameters including roll angle, period and flow height were varied in the experiments to obtain the characteristics of model tank.

• 반도체디스플레이기술학회지
• /
• 제22권3호
• /
• pp.142-148
• /
• 2023

In this paper, we identify performance issues in executing compute kernels from PolyBench, which includes compute kernels that are the core computational units of various data-intensive workloads, such as deep learning and data-intensive applications, on Processing-in-Memory (PIM) devices. Therefore, using our in-house simulator, we measured and compared the various performance metrics of workloads based on traditional out-of-order and in-order processors with Processing-in-Memory-based systems. As a result, the PIM-based system improves performance compared to other computing models due to the short-term data reuse characteristic of computational kernels from PolyBench. However, some kernels perform poorly in PIM-based systems without a multi-layer cache hierarchy due to some kernel's long-term data reuse characteristics. Hence, our evaluation and analysis results suggest that further research should consider dynamic and workload pattern adaptive approaches to overcome performance degradation from computational kernels with long-term data reuse characteristics and hidden data locality.

• International Journal of Internet, Broadcasting and Communication
• /
• 제16권1호
• /
• pp.148-155
• /
• 2024

We are designed was to find an efficient warm-up method for resistance training for muscle hypertrophy, and 10 males with at least 3 years of resistance training experience were selected as subjects. The 75% 1RM was measured directly based on the pre-measured bench press 1RM. After that, the main experiment of 75% 1RM bench press according to the three warm-up methods was conducted one week apart, and all experiments were randomized and cross-over. Performance according to the warm-up method (3) was measured by total exercise volume, and physiological changes were determined by myocardial workload. All post-measurement data were analyzed using SPSS.22.0 and analyzed using repeated measures one-way ANOVA and contrast comparisons were made using the deviation method. The results showed that the method of gradually increasing the number of repetitions by performing the same intensity as the intensity of the main exercise in the form of muscle hypertrophy, but at submaximal repetitions, showed the highest performance.

• 시멘트
• /
• 통권39호
• /
• pp.36-42
• /
• 1970