• Analytical Science and Technology
• /
• v.22 no.4
• /
• pp.293-301
• /
• 2009

As a basic research for development of the domestic field-portable XRF spectrometer, we discussed the analytical results of bench-top ED-XRF and field-portable XRF method for polluted heavy metals such as Cr, As, Se, Hg, Pb, Cd in soil samples. To obtain the best performance of the XRF spectrometer, the instrumental parameters of X-ray tube-voltage and measurement time were optimized for 6 heavy-metal elements in soil using certified reference material. The quantitative analysis of Cr, As, Se, Hg, Pb, Cd concentration in certified reference materials and soil samples were compared by empirical method and fundamental parameter method.

• Explosives and Blasting
• /
• v.42 no.2
• /
• pp.29-41
• /
• 2024

The increasing demand for metallic minerals due to global growth and the continued exploitation of near-surface minerals requires safe and efficient ways to mine ores present in deep mines. In deep mines, stresses concentrated around the cavity increase, which can lead to problems such as induced seismicity and rockbursts. In addition, the transfer of energy from blasting to deeply located faults can cause fault slip, which can lead to earthquakes, and controlling these events is key to deep mining methods. In this technical report, we will introduce the Underhand Closed Bench (UCB) mining method, which can control possible accidents and increase productivity when mining in deep mines.

• Aerospace Engineering and Technology
• /
• v.4 no.1
• /
• pp.45-48
• /
• 2005

Study on the thermal pointing error analysis for optical bench was performed in this paper. Spacecraft FEM is necessary to conduct thermal pointing error analysis for optical bench. But generally during the preliminary design, exact spacecraft FEM does not exist. So the analysis method to predict thermal pointing error of spacecraft is necessary without exact spacecraft FEM. In this study, these analysis techniques are described.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.10b
• /
• pp.267-268
• /
• 2002

Engine testing of new low-sulfur, low-phosphorus anti wear components is expensive and time consuming so bench testing of potential candidates is highly desirable as a first step evaluation. Electrical contact resistance (ECR) has been shown to be a convenient method to assess antiwear film formation in a ball-on-flat bench wear test. Correlation of the bench test to fired engines was demonstrated for lubricants varying only in the type of detergent. Previous papers have examined film formation by one and two component formulations of zinc dialkyldithiophosphate (ZnDTP) and detergents. In this study, the ECR technique is systematically extended to formulations including ZnDTP, detergent, and dispersant. Both type and level of components are considered and the implications for engine performance are discussed.

• Journal of Energy Engineering
• /
• v.8 no.1
• /
• pp.127-136
• /
• 1999

Bench Scale급 기류층 석탄가스화기에서 배출된 슬form의 특성을 파악하기 위해서 Drayton 석탄과 Kideco 석탄으로부터 생성된 슬래그의 조성, 형상, 잔존탄소함량 및 중금속 성분들을 분석하였다. Drayton 석탄 슬래그의 형상은 표면이 매끄럽고 단단하며 다공성을 띄면서 crack이 거의 없고 결정구조가 비정형인 반면에, Kideco석탄 슬래그의 경우는 표면이 거칠고 crack이 상당히 많이 존재하며 주결정상은 pyroxene과 anorthnite 등으로 이루어져있다. 슬래그의 재활용시 판단 기준이 되는 잔존탄소함량은 두 대상탄 모두 1% 이하를 나타내어 재활용이 가능하며, 슬래그의 용출수 분석결과 석탄중에 함유된 중금속은 슬래그중에 용융되어 안정한 화합물로 존재하므로 중금속 유출로 인한 2차적인 환경오염 문제는 없을 것으로 판단된다.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.6 s.183
• /
• pp.187-195
• /
• 2006

FDM, SLS, and EOS processes are the layered manufacturing processes far functional prototypes. In this paper, bench mark tests of those processes were carried out using various materials. The test includes mechanical properties, such as tensile and compressive strengths, hardness, impact strength, and heat resistance, and surface roughness, shape and dimensional accuracy, manufacturing time, and manufacturing costs. It is verified that SLS method is advantageous in surface roughness and manufacturing time, EOS method in shape accuracy, and FDM method is great in manufacturing costs.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.687-690
• /
• 2009

본 연구에서는 가스 하이드레이트 형성과정에서 발생할 수 있는 유도지체시간을 줄이고 전체 가스 저장량과 반응 속도의 향상을 위하여 이류체 분사 방식을 이용하여 물분자의 액적을 최소화하는 실험을 통하여, 미세액적 분사에 따른 하이드레이트 형성 시간을 확인하였으며, 반응기 내부의 온도 변화를 확인하여 반응기 내부의 하이드레이트 형성 거동을 확인하고 이를 통하여 상용화를 위한 반응기 설계의 기초 자료로 활용하고자 하였다.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2001.10a
• /
• pp.119-122
• /
• 2001

Annual demand of a precast concrete bench flume used in the irrigation canal of arable land readjustment has continuously increased units recently. The average life time of the precast concrete bench flume was estimated $8{\sim}10$ years, which is too shorter than the life time of in-site placed concrete structures. In order to increase the compressive strength of the precast concrete bench flumes, the highest temperature of being lower than $95^{\circ}C$ was suggested in this study, Through analyzing the relation between the compressive strength and the amount of chloride penetration into concrete specimens, a new formula early estimating durability of the concrete structure was suggested.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2005.11a
• /
• pp.161-164
• /
• 2005

This paper finds the optimal staking sequence of the satellite composite structures to minimize severe thermal deformations during their orbital operation using GAs and finite element analyses. Then, the optimal design is reinforced to endure the launch loads like high inertia and vibratory loads that are, usually, smaller than orbital loads induced by space environments. The thermal deformation of sandwich panels was minimized at the staking sequence of [$0_2$/90]s and that of composite strut was lowest at the angle of [0/${\pm}45$]s Also there was no buckling in the compressive loading. By vibration analysis, the natural frequencies of the composite components are much higher than aluminum structures and the expected stiffness condition is satisfied. Then, a composite optical bench was fabricated for tests and all analyses results were verified by structural testing. There were good correlations between two results.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.203-206
• /
• 2003

Thermo-optic tunable filter, with 4-pairs of H/L layers for DBR, was designed and fabricated. The transmittance characteristics of the filter were measured. Additionally, heating system and temperature sensor system were used in order to observe property of the filter by thermo-optic effect. The tuning efficiency of the filter was measured to be 0.144nm/K$^{-1}$ showing the tuning range of 9.4nm for the temperature variation of 64.7$^{\circ}C$. Filter, lens and fiber were aligned by micro-optical bench.