• Smart Structures and Systems
• /
• 제31권3호
• /
• pp.301-309
• /
• 2023

Tilt is a key indicator of structural safety. Real-time monitoring of tilt responses helps to evaluate structural condition, enable cost-effective maintenance, and enhance lifetime resilience. This paper presents a prototype wireless sensing system for structural tilt measurement. Long range (LoRa) technology is adopted by the sensing system to offer long-range wireless communication with low power consumption. The sensor integrates a gyroscope and an accelerometer as the sensing module. Although tilt can be estimated from the gyroscope or the accelerometer measurements, these estimates suffer from either drift issue or high noise. To address this challenging issue and obtain more reliable tilt results, two sensor fusion algorithms, the complementary filter and the Kalman filter, are investigated to fully exploit the advantages of both gyroscope and accelerometer measurements. Numerical simulation is carried out to validate and compare the sensor fusion algorithms. Laboratory experiment is conducted on a simply supported beam under moving vehicle load to further investigate the performance of the proposed wireless tilt sensing system.

• 한국식품과학회지
• /
• 제26권6호
• /
• pp.704-708
• /
• 1994

유자 과즙의 착즙방식에 따른 유자 과즙의 품질을 비교 분석하기 위하여 회전식 마폐착즙, 압착식 및 벨트식 착즙법을 이용하였다. 그 결과, 회전식 마쇄착즙방식에 의한 과즙수율은 24.49% 수준으로 가장 높게 나타났으며, 압착식은 18.09%, 벨트식은 12.60%로 각각 나타났다. 압착식 및 희전식 마폐 착즙방식에 의한 과즙의 가용성 고형물은 $11^{\circ}Brix$ 수준으로 벨트식의 $9^{\circ}Brix$에 비해 다소 높았으나 적정산도는 벨트식이 6.1%로 가장 높고, 희분량은 유사한 수준으로 나타났으며, 오일 및 펌프 함유량도 벨트식에 비해 $2{\sim}4$배 정도 높았다. 그리고 총당은 5%수준으로 착즙방식에 관계없이 유사하게 나타났으나, 유리당의 경우 fructose, glucose, sucrose 가 벨트식에서 각각 0.54, 0.37, 1.11% 수준으로 가장 적게 나타났다. 또한 지방산 함량은 회전식 마쇄착즙방식에서 oleic acid, 압착식에서 palmitic acid, lino-leic acid, linolenic acid, 벨트식에서 stearic acid의 함량이 타 방식에 비해 다소 높게 분석되었다. 유리 아미노산 함량은 벨트식이 타 착즙방식에 비하여 적게 나타났으며, 특히 threonin은 회전식 마계착즙법에서만 감지되었으며, 그리고 methionin과 cystine은 모든 착즙방식에서 전혀 감지되지 않았다. 그러나 아미노산 총함량은 벨트식에서 3,613.49mg%로 타 방식에 비하여 약 $1.3{\sim}1.6$배 청도 높은 수준을 보였다.

• Applied Biological Chemistry
• /
• 제41권2호
• /
• pp.181-186
• /
• 1998

하수처리 운전이 슬러지 특성에 미치는 영향을 실제규모 하수처리장에서 수행하였으며 하수 슬러지 특성변화가 퇴비화 원료로 이용될 경우 그 영향을 조사, 분석하였다. 천안 하수처리장은 가동 초기 1년동안 정상적으로 운전되고 있으며 유출수는 방류수 수질기준을 만족하고 있으나 유입유량의 증가로 인하여 처리장 증설이 시급하다. 슬러지 탈수시설인 Belt press의 용량부족으로 하수처리장 내 비휘발성 고형물이 순환, 농축되어 활성 슬러지 MLSS 증가와 이에 따라 F/M비가 감소되게 운전하는 결과를 초래하고 있으며 이러한 상태로 하수처리장이 장기간 운전될 경우 하수처리 시설의 효율저하가 우려된다. 하수 슬러지의 수분함량은 79.5%, 유기물 함량은 11.6 %, C/N비는 6.1이었으며 중금속으로 As 1.8 mg/kg, Cd 27 mg/kg, Hg <0.1 mg/kg, Pb 54 mg/kg, T-Cr 370 mg/kg과 Cu 1,100 mg/kg이 검출되었다.하수 슬러지는 퇴비화 적정조건을 만족할 수 있는 원료로서 사용되기 위하여 수분함량, 유기물 함량 그리고 C/N비의 조절이 필요하며 이를 위한 첨가제/팽화제의 첨가가 필수적이다. 하수처리장 유입수에 함유된 중금속은 대부분 하수 슬러지에 농축되며 퇴비화 원료로 사용될 경우 부산물비료로서 규격기준에 적합하지 않을 뿐만아니라 토양오염이 우려되므로 유입수의 중금속 발생원을 추적, 제거하는 방안이 검토되어야 한다.

• 한국환경과학회지
• /
• 제13권7호
• /
• pp.681-687
• /
• 2004

This study was focused on the manufacturing method of a dewatering aid, which would reduce the water content of the sludge cake by enhancing the dewaterability of sewage sludge. The pretreatment technology for sludge by using radiation and among diverse discarded resources were starfish selected as the material to manufacture the dewatering aid. Starfish went through the process of washing, drying, and pulverizing. The starfish powder made in this process was applied to the digested sludge generated at the sewage treatment plant of D City, and its effects were investigated. The starfish powder that was 300 ${\mu}m$ in particle size was added to the irradiated digested sludge. After the application of the condensation process, the sludge with the starfish powder added was dewatered using the belt press and centrifuge, which were the traditional pressure dewatering devices. As the result, it reduced the water content of the sludge 20% higher than the dewatered cake with no dewatering aid added and irradiation. When the powder was added, it contributed to less use of the coagulant added. The more irradiation dose, the lower water content did the dewatered cake have and the more coagulant was needed for condensation, which seems to be a disadvantage that can be compensated for by the starfish dewatering aid. A small-scaled treatment of the study to a radiation technology and dewatering aid using a discarded resource confirmed the potential of dewaterability. Based on the results saying that the dewatering aid and radiation technology can improve dewatering effects using the traditional dewatering devices, this pretreatment technology will be expected to be applied to sewage treatment plants.

• 자원리싸이클링
• /
• 제13권3호
• /
• pp.12-18
• /
• 2004

불가사리와 조개껍질의 폐 수산자원을 개량제로 이용한 도시하수 슬러지의 탈수능 향상 연구를 수행하였다. 불가사리와 조개껍질을 105∼$700^{\circ}C$로 열처리하여 사용하였으며, 탈수방법으로는 원심분리와 벨트프레스를 사용하였다. 총 고형물 기준으로 개량제를 1∼8g/100mL 주입하여 탈수 후 슬러지 케익의 함수율을 15∼22% 저감시키는 결과를 얻었다. 개량제 주입 후 슬러지의 탈수 특성을 평가하기 위하여 CST(Capillary Suction Time)를 측정하였다. 불가사리 첨가 후 CST는 증가하는 경향을 나타내었으나, 조개껍질 첨가 후 CST는 감소하는 경향을 나타내었다. 조개껍질이 불가사리보다 탈수 효율이 나은 결과를 보였으며, 열처리 온도에 대한 효과는 무시할 수 있을 정도로 적게 나타났다.

• Earthquakes and Structures
• /
• 제9권4호
• /
• pp.875-891
• /
• 2015

Earthquake can occur anywhere in the world and it is essential to design important members in special structures based on maximum possible forces that can be produced in them under severe earthquake. In addition, since the earthquake is an accidental phenomena and there are no similar earthquakes, therefore the possibility of strong earthquakes should be taken into account in earthquake-resistant design of important structures. Based on this viewpoint, finding the critical acceleration which maximizes internal forces is an essential factor in structural design. This paper proposes critical excitation method to compute the critical acceleration in design of important members in special structures. These critical accelerations are computed so that the columns' internal shear force at the base of the structure at each time step is maximized under constraints on ground motion. Among computed critical accelerations (of each time step), the one which produces maximum internal shear force is selected. A numerical example presents to show the efficiency of critical excitation method in determining the maximum internal shear force and base moment under variety of constraints. The results show that these method can be used to compute the resonant earthquake which have large enough effective duration of earthquake strong motion (between 12.86 sec to 13.38 sec) and produce the internal shear force and base moment for specific column greater than the same value for selected earthquakes in constructing the critical excitation (for different cases about 2.78 to 1.29 times the San Fernando earthquake). Therefore, a group of them can be utilized in developing the response spectrum for design of special structures.

• Smart Structures and Systems
• /
• 제14권1호
• /
• pp.39-54
• /
• 2014

Node layout optimization of structural wireless systems is investigated as a means to prolong the network lifetime without, if possible, compromising information quality of the measurement data. The trade-off between these antagonistic objectives is studied within a multi-objective layout optimization framework. A Genetic Algorithm is adopted to obtain a set of Pareto-optimal solutions from which the end user can select the final layout. The information quality of the measurement data collected from a heterogeneous WSN is quantified from the placement quality indicators of strain and acceleration sensors. The network lifetime or equivalently the network energy consumption is estimated through WSN simulation that provides realistic results by capturing the dynamics of the wireless communication protocols. A layout optimization study of a monitoring system on the Great Belt Bridge is conducted to evaluate the proposed approach. The placement quality of strain gauges and accelerometers is obtained as a ratio of the Modal Clarity Index and Mode Shape Expansion values that are computed from a Finite Element model of the monitored bridge. To estimate the energy consumption of the WSN platform in a realistic scenario, we use a discrete-event simulator with stochastic communication models. Finally, we compare the optimization results with those obtained in a previous work where the network energy consumption is obtained via deterministic communication models.

• 한국학교보건학회지
• /
• 제10권2호
• /
• pp.193-211
• /
• 1997

The study was designed to gain necessary basic data in order to grasp the health knowledge, attitude, and practice level of students and teachers of elementary, middle and high schools. This study was conducted through interviews of 3,400 students and 1,022 teachers attending 14 different schools large, middle and small cities and rural towns during a period of nine months (from Oct. 2 1995 to Jun. 30 1996). By the results of this study, the recommendations can be summarized as follows: 1. A school health development committee should be established of 10 members: school health related teachers (physical trainers, nurses, and teachers in charge of health), parents, persons related to health administration, local medical doctors, and student reprensentatives in order to support and immplement school health development plans. 2. Like advanced countries, a health class of 2~4 hours should beplaced in middle and high schools. A nurse majoring in health from a university should be the teacher. 3. A curriculum of health should contain the following: education on health, sex, alcohol, tabacco, the misuse of the drugs, the structure and function of human body, the growth of the body, mental health, safety and emergency care, the prevention of disease, proper eating habits and nutrition, daily health life, family health education, society health, community health, environmental pollution and individual responsibility. 4. Create a school health promotion center, with a nurse's office, and a sports center which has health machines (bars, aerobics, training, twist machine, belt massage, running machine, bench press, chest waist, hack hip extension machine) as well as a physical strength measuring machine (muscular strength, alertness, flexibility, endurance, lung functions and so on), so that the teaching staff and students can use them and train their bodies. 5. Through a refresher education program, urge teachers to understand school health promotion services. 6. Regulate a standard and establish a system of monitoring the physical enviroment of the school (the height of desks and chairs, illumination facilities, ventilation facilities, safe drinking water). 7. Create a check list of health to evaluate improvement.

• Wind and Structures
• /
• 제27권6호
• /
• pp.381-397
• /
• 2018

Nonlinear behavior in fluid-structure interaction (FSI) of bridge decks becomes increasingly significant for modern bridges with increasing spans, larger flexibility and new aerodynamic deck configurations. Better understanding of the nonlinear aeroelasticity of bridge decks and further development of reduced-order nonlinear models for the aeroelastic forces become necessary. In this paper, the amplitude-dependent and neutral angle dependent nonlinearities of the motion-induced loads are further highlighted by series of computational fluid dynamics (CFD) simulations. An effort has been made to investigate a semi-analytical time-domain model of the nonlinear motion induced loads on the deck, which enables nonlinear time domain simulations of the aeroelastic responses of the bridge deck. First, the computational schemes used here are validated through theoretically well-known cases. Then, static aerodynamic coefficients of the Great Belt East Bridge (GBEB) cross section are evaluated at various angles of attack, leading to the so-called nonlinear backbone curves. Flutter derivatives of the bridge are identified by CFD simulations using forced harmonic motion of the cross-section with various frequencies. By varying the amplitude of the forced motion, it is observed that the identified flutter derivatives are amplitude-dependent, especially for $A^*_2$ and $H^*_2$ parameters. Another nonlinear feature is observed from the change of hysteresis loop (between angle of attack and lift/moment) when the neutral angles of the cross-section are changed. Based on the CFD results, a semi-analytical time-domain model for describing the nonlinear motion-induced loads is proposed and calibrated. This model is based on accounting for the delay effect with respect to the nonlinear backbone curve and is established in the state-space form. Reasonable agreement between the results from the semi-analytical model and CFD demonstrates the potential application of the proposed model for nonlinear aeroelastic analysis of bridge decks.

• Geomechanics and Engineering
• /
• 제24권5호
• /
• pp.407-418
• /
• 2021

Due to the complexity of the causes of the sliding mass instabilities, landslide susceptibility and hazard evaluation are difficult, but they can be more carefully considered and regionally evaluated by using new programming technologies to minimize the hazard. This study aims to evaluate the landslide hazard zonation in the Tabriz region, Iran. A fuzzy logic-based multi-criteria decision-making method was proposed for susceptibility analysis and preparing the hazard zonation maps implemented in MATLAB programming language and Geographic Information System (GIS) environment. In this study, five main factors have been identified as triggering including climate (i.e., precipitation, temperature), geomorphology (i.e., slope gradient, slope aspect, land cover), tectonic and seismic parameters (i.e., tectonic lineament congestion, distribution of earthquakes, the unsafe radius of main faults, seismicity), geological and hydrological conditions (i.e., drainage patterns, hydraulic gradient, groundwater table depth, weathered geo-materials), and human activities (i.e., distance to roads, distance to the municipal areas) in the study area. The results of analyses are presented as a landslide hazard map which is classified into 5 different sensitive categories (i.e., insignificant to very high potential). Then, landslide susceptibility maps were prepared for the Tabriz region, which is categorized in a high-sensitive area located in the northern parts of the area. Based on these maps, the Bozgoosh-Sahand mountainous belt, Misho-Miro Mountains and western highlands of Jolfa have been delineated as risk-able zones.