• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.39
• /
• pp.4.1-4.7
• /
• 2017

Background: This study is a quantitative evaluation of the influence of the mentolabial angle on perceived attractiveness and threshold values of desire for surgery. Methods: The mentolabial angle of an idealized silhouette male Caucasian profile image was altered incrementally between $84^{\circ}$ and $162^{\circ}$. Images were rated on a Likert scale by pretreatment orthognathic patients (n = 75), lay people (n = 75) and clinicians (n = 35). Results: A mentolabial angle of approximately $107^{\circ}$ to $118^{\circ}$ was deemed the most attractive, with a range of up to $140^{\circ}$ deemed acceptable. Angles above or below this range were perceived as unattractive, and anything outside the range of below $98^{\circ}$ or above $162^{\circ}$ was deemed very unattractive. A deep mentolabial angle ($84^{\circ}$) or an almost flat angle ($162^{\circ}$) was deemed the least attractive. In terms of threshold values of desire for surgery, for all groups, a threshold value of ${\geq}162^{\circ}$ and ${\leq}84^{\circ}$ indicated a preference for surgery, although clinicians were least likely to suggest surgery. The clinician group was the most consistent, and for many of the images, there was some variation in agreement between clinicians and lay people as to whether surgery is required. There was even more variability in the assessments for the patient group. Conclusions: It is recommended that in orthognathic and genioplasty planning, the range of normal variability of the mentolabial angle, in terms of observer acceptance, is taken into account as well as threshold values of desire for surgery. The importance of using patients as observers in attractiveness research is stressed.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.7
• /
• pp.67-74
• /
• 2009

This paper describes the speed control functions of the typical steam turbine speed controllers and the test results of generator load rejection simulations. The goal of the test is to verify the speed controller's ability to limit the steam turbine's peak speed within a predetermined level in the event of generator load loss. During normal operations, the balance between the driving force of the steam turbine and the braking force of the generator load is maintained and the speed of the turbine-generator is constant. Upon the generator's load loss, in other word, the load rejection, the turbine speed would rapidly increase up to the peak speed at a fast acceleration rate. It is required that the speed controller has the ability to limit the peak speed below the overspeed trip point, which is typically 110[%] of rated speed. If an actual load rejection occurs, a substantial amount of stresses will be applied to the turbine as well as other equipments, In order to avoid this unwanted situation, not an actual test but the other method is necessary. We are currently developing the turbine control system for another nuclear power plant and have plan to do the simulation suggested in this paper.

• Nuclear Engineering and Technology
• /
• v.33 no.6
• /
• pp.638-651
• /
• 2001

The present study is to assess the applicability of the best-estimate thermal-hydraulic code, MARS 1.4, for the analysis of thermal-hydraulic behavior in PWRs during natural circulation conditions. The code simulates a natural circulation test, BETHSY test 4. la, which was conducted on the integral test facility of BETHSY. The test represented the cooling states of the primary cooling system under single-phase natural circulation, two-phase natural circulation and the reflux condensation mode with conditions corresponding to the residual power, 2% of the rated core power value and 6.8 MPa at the secondary system. Based on MARS 1.4 calculations, the major thermal-hydraulic behaviors during natural circulation are evaluated and the differences between the experimental data and calculated results are identified. The calculated results show generally good behavior with regard to the experimental results; the region of single-phase natural circulation is 100-92% of the initial mass inventory, two-phase natural circulation is 84-63 %, and the reflux condensation mode occurred below 58 %. U-tubes empty and the core uncovery are obtained at 39 % and 34 % of the initial mass inventory, respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.361-361
• /
• 2009

KEPCO High Temperature Superconducting (HTS) cable system rated with $3\Phi$, 22.9kV, 1250A was laid in 2006, and the long term test is in progress. The HTS cable system with the cooling system has been operated below cryogenic temperature. That environment exposes the system to the thermo-mechanical stress due to the significant temperature difference, and the cooling system has moving parts for the forced circulation of the coolant. Therefore the HTS cable system experiences thermal fatigue and moving part such as liquid nitrogen pump need a regular replacement every 5000 hours Building the assessment criterion, the maintenance procedure was established and regular preventive maintenance was done; improvement of the termination structure and the replacement of the bearing of liquid nitrogen pump. Following the proper process, the reliability assessment test including He leakage detection and the stability of flow rate was performed. This paper describes the process and result of the first regular maintenance of KEPCO HTS cable system

• Journal of Power Electronics
• /
• v.15 no.1
• /
• pp.86-95
• /
• 2015

An active clamp high step-up boost converter with a coupled inductor is proposed in this paper. In the proposed strategy, a coupled inductor is adopted to achieve a high voltage gain. The clamp circuit is included to achieve the zero-voltage-switching (ZVS) condition for both the main and clamp switches. A rectifier composed of a capacitor and a diode is added to reduce the voltage stress of the output rectifier diode. As a result, diodes with a low reverse-recovery time and forward voltage-drop can be utilized. Since the voltage stresses of the main and clamp switches are far below the output voltage, low-voltage-rated MOSFETs can be adopted to reduce conduction losses. Moreover, the reverse-recovery losses of the diodes are reduced due to the inherent leakage inductance of the coupled inductor. Therefore, high efficiency can be expected. Firstly, the derivation of the proposed converter is given and the operation analysis is described. Then, a steady-state performance analysis of the proposed converter is analyzed in detail. Finally, a 250 W prototype is built to verify the analysis. The measured maximum efficiency of the prototype is 95%.

• Korean Journal of Adult Nursing
• /
• v.25 no.1
• /
• pp.1-12
• /
• 2013

Purpose: The purpose of this study was to explore the nurses' perception of the importance of evaluating continuing nursing education programs. Methods: Subjects were 465 nurses enrolled in continuing nursing education programs at five university hospitals in Seoul and Gyeonggi-do. Data were collected from September 20, 2011 to October 13, 2011. The instrument was developed by the author through a literature review. Content validity was established from a panel of six experts. Data were analyzed using SPSS/WIN 18.0 program. Results: The purpose of the program was rated as the most important domain by the subjects. Interestingly, 'program outcome' and 'effectiveness of program' were ranked below the mean (M=$3.64{\pm}0.75$). These two domains were influenced by the district of work and the type of institution. The position of the participants at their institutions made the significant differences on their perception of 'program purpose.' Conclusion: The results of this study might aid us to have better understanding for what nurses perceive the importance of evaluating continuing nursing education programs. This information might be able to be used for improving programs. Further studies are needed to explore the validity of the instruments to evaluate continuing nursing education programs.

• Korean Journal of Agricultural Science
• /
• v.50 no.3
• /
• pp.499-510
• /
• 2023

The purpose of this study is to develop a high-speed combine harvester. The performance was evaluated by composing a dynamic simulation model of a threshing cylinder and analyzing the amount of threshed rice grain during threshing operations. The rotational speed of the threshing cylinder was set at 10 rpm intervals from 500 rpm until 540 rpm, based on the rated rotational speed of 507 rpm. The rice stem model was developed using the EDEM software using measured rice stem properties. Multibody dynamics software was utilized to model the threshing cylinder and tank comprising five sections below the threshing cylinder, and the threshing performance was evaluated by weighing the grain collected in the threshing tank during threshing simulations. The simulation results showed that section 1 and 2 threshed more grains compared to section 3 and 4. It was also found that when the threshing speed was higher, the larger number of grains were threshed. Only simulation was conducted in this study. Therefore, the validation of the simulation model is required. A comparative analysis to validate the simulation model by field experiment will be conducted in the future.

• Physical Therapy Korea
• /
• v.17 no.2
• /
• pp.51-59
• /
• 2010

The Functional Independence Measure (FIM) is widely used to determine the dependency of activity of daily living in rehabilitation patients. The purposes of this study were to evaluate the unidimentionality of the FIM physical items and to analyze the validity of cross-functional levels in stroke survivors in Korea. Thirteen physical items of FIM were rated according to an ordinal scale of a 7-level classification. Two hundred and seventy-nine patients participated in the study (age range 18~92 years and 57% male). Six items-eating, bladder control, bowel control, transfer to and from the bed/wheelchair, transfer to and from the toilet, and bathing-showed misfits with the Rasch model. The most difficult item was 'bathing', the easiest item was 'bowel control'. Although there were several differences within functional levels, the hierarchical order of item measures was rather similar. 'Bathing' was the most difficult in high level patients (above 60), however 'stairs' was most difficult in the middle level (41~60) group. In the low level group (below 40), 'toileting' was the most difficult. In conclusion, the present study has shown several differences of item difficulty among functional levels. This result will be useful in planning interventions, and developing rehabilitation programs for stroke survivors.

• Proceedings of the KIEE Conference
• /
• 1994.07a
• /
• pp.255-257
• /
• 1994

The V/F slip frequency constant control methods are used for driving induction motor with load commutated current source inverter, that is. constant V/F and slip frequency driving is used to load commutate the inverter below the critical frequency, while constant voltage and variable frequency and slip frequency driving are used in above the critical region. In order to applicate the load commutated current source inverter to the general use, speed control range of induction noter is selected to two times at rated frequency. Therefore, economical application is possible because of the maximum reduction of the condenser of the inverter output port. The use of the proposed force commutated circuit improves the false operation of force commutated circuit and inverter commutation failure which are produced by the influence of the lower-order harmonics of the conventional load commutated current source inverter at starting.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.28 no.4
• /
• pp.942-947
• /
• 1999

This study was conducted to evaluate sanitary practices of employees in business & industry foodservice operations of Pusan and the Kyung Nam areas, and to suggest a guideline for an effective sanitation training program. The questionnaire was used in this study as a survey method. Questionnaire were administered to 246 employees. The results were as follows. 55.3% of employees have had regular(monthly) food sanitation education. The mean rating of food sanitary knowledge for all employees was 65.9/100. When the education level was higher and the age younger, the mean rating of was also higher. Among the ratio of correct answers for food sanitary knowledge areas, a equipment sanitation was the highest (80.5%), and time temperature was the lowest(45.3%). The mean rating of sanitary procedures for food storage was 4.80/5.00, pre preparation 4.04/5.00, personal hygiene 3.54/5.00, equipment sanitation 3.20/5.00, and food preparation 2.56/5.00. Employees regularly educated in food sanitation rated significantly higher for food preparation than those who were of irregulary educated. The higher mean rating group(over 66) for the food sanitary knowledge showed significantly higher rates in sanitary procedures(food preparation, equipment sanitation, and personal hygiene) than that of the lower group(below 65). The practice of personal hygiene was positively correlated (p<0.001) with sanitary concept and food preparation, among the food sanitary knowledge areas.