• Geomechanics and Engineering
• /
• v.2 no.1
• /
• pp.1-18
• /
• 2010

The analysis of structure response and design of buried structures subjected to dynamic destructive loads have been receiving increasing interest due to recent severe damage caused by strong earthquakes and terrorist attacks. For a comprehensive design of buried structures subjected to blast loads to be conducted, the whole system behaviour including simulation of the explosion, propagation of shock waves through the soil medium, the interaction of the soil with the buried structure and the structure response needs to be simulated in a single model. Such a model will enable more realistic simulation of the fundamental physical behaviour. This paper presents a complete model simulating the whole system using the finite element package ABAQUS/Explicit. The Arbitrary Lagrange Euler Coupling formulation is used to model the explosive charge and the soil region near the explosion to eliminate the distortion of the mesh under high deformation, while the conventional finite element method is used to model the rest of the system. The elasto-plastic Drucker-Prager Cap model is used to model the soil behaviour. The explosion process is simulated using the Jones-Wilkens-Lee equation of state. The Concrete Damage Plasticity model is used to simulate the behaviour of concrete with the reinforcement considered as an elasto-plastic material. The contact interface between soil and structure is simulated using the general Mohr-Coulomb friction concept, which allows for sliding, separation and rebound between the buried structure surface and the surrounding soil. The behaviour of the whole system is evaluated using a numerical example which shows that the proposed model is capable of producing a realistic simulation of the physical system behaviour in a smooth numerical process.

• Geomechanics and Engineering
• /
• v.34 no.3
• /
• pp.317-328
• /
• 2023

The soil behaviour can be represented by numerical modelling of element testing using diverse constitutive models. However, not all constitutive models allow the simulation of the stress-strain response at the critical state in granular soils with both contractive and dilative behaviour. Moreover, the accuracy of these models depends highly on the quality of the experimental data used for their calibration. This study addresses the modelling of the critical state behaviour of an alluvial natural soil from the Lower Tagus Valley (south of Portugal), known as TP-Lisbon sand, using the NorSand constitutive law. For this purpose, a series of numerical simulations of element testing was carried out using two algorithms performed in Visual Basic (VB) and Fast Lagrangian Analysis of Continua (FLAC). Moreover, this study presents the characterisation of of NorSand parameters from an accurate experimental programme based on triaxial and bender element testing. This experimental program allowed defining: (i) the critical state locus, (ii) the stress-dilatancy, and (iii) the soil elasticity of TP-Lisbon sand -all fundamental to calibrate the contractive and dilative behaviour of such alluvial soil. The results revealed a good agreement between experimental data and NorSand simulations using VB and FLAC. Therefore, this study showed that the quality of laboratory testing procedures and its good interpretation enables NorSand constitutive law to capture representatively the non-associated plastic strains, often expressed by the state parameter, allowing a representation of soil behaviour of alluvial soils within the critical state soil mechanics framework for different state parameters.

• Advances in materials Research
• /
• v.13 no.5
• /
• pp.391-416
• /
• 2024

Hybrid composite materials are widely used in various load-bearing structural components of micro - mini UAVs. However, the design of thin laminates for better impact resistance remains a challenge, despite the strong demand for lightweight structures. This work aims to assess the low-velocity impact (LVI) behaviour of thin quasi-isotropic woven carbon/ aramid epoxy hybrid laminates using experimental and numerical techniques. Drop tower impact test with 10 J and 15 J impact energies is performed on carbon/epoxy laminates having aramid layers at different sequences and locations. The impact behaviour is experimentally evaluated using force-time, force-deformation, and energy-time histories considering delamination threshold load, peak load, and laminate deflection. Ultrasonic C-scan is performed on the post-impact samples to analyse the insidious damage profile at different impact energies. The experimental data is further utilized to numerically simulate LVI behaviour by employing the representative volume element model. The numerical results are in good agreement with the experimental data. Numerical and experimental approach predicts that the hybrid laminates with aramid layers at both impact and non-impact sides of the laminate exhibits significant improvement in the overall impact behaviour by having a subcritical damage morphology compared to carbon/epoxy laminate. A combined numerical-experimental approach is proposed for evaluating the effective impact performance.

• Journal of Fashion Business
• /
• v.16 no.3
• /
• pp.45-62
• /
• 2012

This study aims to examine the effect of talent types on the purchasing behaviour of beauty-service products in 367 adults(female and male). The present study is the first to consider both talent types and the purchasing behaviour of beauty-service products correlates to appearance management behaviour. Frequency analysis showed that the mean of 8 talent types of 367 participants was 3.324. The highest talent type of 367 participants was interpersonal talent, the lowest talent type was logical-mathematical talent among 8 talent types. There were statistically significant relationships between the talent types(specially, bodily-kinesthetic talent and interpersonal talent) and the purchasing criteria of beauty-service products on the correlation analysis. And the effects of 8 talent types on the purchasing frequency of 4 beauty-service products were significant on the regression analysis, specifically, the results showed that the most significant among 8 talent factors was the interpersonal talent, next, the bodily-kinesthetic was. Thus, the more purchasing frequency of beauty-services products, the higher interpersonal talent were, and the better affinity with others were. As a results, the interpersonal talent factor and bodily-kinesthetic talent factor among 8 talent factors were ultimately affecting the appearance management behaviour. The higher the score, it was concluded that the subject was more active in beauty-related behavior. Conclusively, the appearance is a form of personal asset for one's self-fulfillment, and strong and beautiful appearance is a medium to improve self-esteem and dominance. It is possessing a significant influence in personal satisfaction, self-identity, and social success.

• International Journal of Computer Science & Network Security
• /
• v.22 no.11
• /
• pp.163-171
• /
• 2022

A conceptual model represents an understanding of a system that is going to be developed, which in this research, a driving simulation software to study driver behavior at signalised intersections. Therefore, video observation was conducted to examine driver compliance behaviour within the dilemma zone at signalised intersection, pertaining to driver's distance from the stop line during yellow light interval. The video was analysed using Thematic Analysis and the data extracted from it was analysed using Chi-Square Independent Test. The Thematic Analysis revealed two major themes which were traffic situation and driver compliance behaviour. Traffic situation is defined as traffic surrounding the driver, such as no car in front and behind, car in front, and car behind. Meanwhile, the Chi-Square Test result indicates that within the dilemma zone, there was a significant relationship between driver compliance behaviour and driver's distance from the stop line during yellow light interval. The closer the drivers were to the stop line, the more likely they were going to comply. In contrast, drivers showed higher noncompliant behavior when further away from stop line. This finding could help us in the development of conceptual model of driving simulation with purpose of studying driver behavior.

• Steel and Composite Structures
• /
• v.1 no.1
• /
• pp.111-130
• /
• 2001

This paper presents an effective, reliable and accurate method for prediction of structural behaviour of steel frames at elevated temperature. The refined plastic hinge method, which has been used successfully in the second-order elasto-plastic analysis of steel frames at ambient conditions, is adopted here to allow for time-independent fire effects. In contrast to the existing rigorous finite element programs, the present method uses the advanced analysis technique that provides a simple and reliable means for practical study of the behaviour of steel frames at elevated temperature by a limiting stress model. The present method is validated against other test and numerical results.

• The Journal of Korean Society for School & Community Health Education
• /
• v.2 no.2
• /
• pp.89-99
• /
• 2001

This paper is based on the assumption that the sexual awareness and sexual behaviour of high school students would show the difference between an academic high school and a vocational high school. The main purpose of this paper is to provide basic information on establishing the direction of a realistic and efficient education, which leads to the desirable sex ethics eventually. To do this, a comparative study was carried out to figure out the difference between academic high school students and vocational high school students in terms of their actual awareness and behaviour of sex. I put the following two questions in order to achieve the goal of this study. First, what is the difference in sexual awareness between academic high school students and vocational high school students? Second, what is the difference in sexual behaviour between academic high school students and vocational high school students? The subjects of the survey conducted were 595 high school students in Kyunggi Province and I made the questionnaires referencing pre-studies. The SPSS program was used to get a frequency and a percentage from the results of the survey and then, by applying t-text, $x^2$ verification and interrelation, the following results were obtained. First, regarding sexual awareness, there wasn't much difference in their idea of keeping virginity before marriage between academic high school students and vocational high school students. From the results obtained by analyzing the interrelation between students and their parents and friends in terms of a will to keep virginity, it is found that there was a relevance in both academic high school and vocational high school. When they have a sex problem, it was friends that they are looking for consulting and both groups showed thesame result. But pertaining to an experience of a sex education, the comparative analysis indicated an meaningful difference. Second, as for sex behaviour, it was shown that there was a difference in the experience of going out with the other sex between academic high school students and vocational high school students as well as in the degree of physical touch. However, not much difference was shown in controlling a sex desire between the two groups. As a results of the comparative analysis of the sex experience between the two groups, there was a meaningful difference. In terms of the object of their sex experience, the majority of students in the two groups chose a friend as their first answer and there was little difference. From these results I can draw some conclusions that most of the students in both groups have a link with friends and parents in keeping their virginity. Furthermore, a meaningful difference in experiencing a sex education is presented between the two groups. With regard to the sex behaviour of high school students, a meaningful difference is shown in dating the other sex, a physical touch and a sex experience between the two groups. Consequently, we realize that there is a meaningful difference in some variants on the sexual awareness and sexual behaviour of high school students between academic high school and vocational high school.

• Management & Information Systems Review
• /
• v.29 no.1
• /
• pp.145-176
• /
• 2010

In most service organization, salespeople are the most visible representatives of the company. Salespeople are exposed to greater ethical pressures than individuals in many other jobs. In this context, the salesperson's ethical behaviour can play a critical role in the formation and maintenance of long-term buyer-seller relationships. Moreover, it can even generate liability problems for salespeople's organizations through both intentional and inadvertent statements. The purpose of this research focuses on the analysis of the role of ethical sales behaviour, as perceived by customer, in developing and maintaining relationship between the salesperson and the customer. Thus this study examines the relationship among perceived ethical sales behaviour, customer satisfaction, customer trust, and customer loyalty. The results of empirical analysis can be summarized by the following: First, perceived ethical sales behaviour had a significant direct effect on customer satisfaction, customer trust and customer loyalty. Second, customer satisfaction had a positive effect customer trust and customer loyalty. Third, perceived ethical sales behaviour had a significant indirect effect on customer loyalty through customer satisfaction and customer trust. Therefore, These finding will spawn both academic and practitioner interest in the salesperson's ethical sales behaviour and serve as a foundation for further research in this important area.

• Korean Institute of Interior Design Journal
• /
• no.19
• /
• pp.53-58
• /
• 1999

The goal of this paper is to understand the visual information process and the characteristics of behaviour of the architectural design process using visual protocol analysis through the actual experiment by the architect. The visual protocol analysis is developed on the basis of the theories of the visual information processing model and visual mental image, which can explain visual representation in architectural design process. A protocol study is reported in which the experimental data by architect is analyzed through the protocol analysis method. The whole design process is divided into the stage of 9 tasks which are classified into 18 visual representatiov. The results about visual cognition in cognitive science are reviewed and summarized, and these findings will help understand the architectural design nature.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.10
• /
• pp.1703-1711
• /
• 2003

An elastic-plastic finite element analysis is performed to investigate detailed closure behaviour of fatigue cracks in residual stress fields and the numerical results are compared with experimental results. The finite element analysis performed under plane stress using contact elements can predict fatigue crack closure behaviour. The mesh of constant element size along crack surface can not predict the opening level of fatigue crack. Specially, the mesh of element sizes depending upon the reversed plastic zone size included the effect of crack opening point can precisely predict the opening level. By using the concept of the mesh of element sizes depending upon the reversed plastic zone size included the effect of crack opening point, the opening level of fatigue crack can be determined very well.