• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.12
• /
• pp.2046-2052
• /
• 2016

Ramp metering is one of the most efficient and widely used control methods for an intelligent transportation management system on a freeway. Its objective is to control and upgrade freeway traffic by regulating the number of vehicles entering the freeway entrance ramp, in such a way that not only the alleviation of the congestion but also the smoothing of the traffic flow around the desired density level can be achieved for the maintenance of the maximum mainline throughput. When the cycle of the signal detection is larger than that of the system process, the density tracking problem needs to be considered in the form of the discrete-time system. Therefore, a discrete-time sliding mode control method is proposed for the ramp metering problem in the presence of both input constraint in the on-ramp and exogenous disturbance in the off-ramp considering the random behavior of the driver. Simulations were performed using a validated second-order macroscopic traffic flow model in Matlab environment and the simulation results indicate that proposed control method can achieve better performance than previously well-known ALINEA strategy in the sense that mainstream flow throughput is maximized and congestion is alleviated even in the presence of input constraint and exogenous disturbance.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.3233-3235
• /
• 2000

A new method for HRV(heart rate variability} detection from the R-wave signal, based on the IPFM (integral pulse frequency modulation) model and its similarity to pulse position modulation, is presented. The proposed method exert lowpass filtering with a Kaiser window. In this paper, The proposed method presents a powerful, but simple, tool for investigation of HRV. It also guarantees real-time behavior, simplicity in design, and phase linearity. Even without the basic assumption of IPFM model, the new algorithm can still be used on-line and with higher performance. It is thoroughly proved that lowpass filtering is an ideal method for PSD (Power Spectrum Density) analysis of HRV.

• Computers and Concrete
• /
• v.3 no.2_3
• /
• pp.123-144
• /
• 2006

Reinforced concrete corbels are structural elements widely used in practical engineering. The complex response of these elements is described in design codes in a simplified manner. These formulations are not sufficient to show the real behavior, which, however, is an essential prerequisite for the manufacturing of numerous elements. Therefore, a deterministic and probabilistic study has been performed, which is described in this contribution. Real complex structures have been modeled by means of the finite element method supported primarily by experimental works. The main objective of this study was the detection of uncertainties effects and safety margins not captured by traditional codes. This aim could be fulfilled by statistical considerations applied to the investigated structures. The probabilistic study is based on advanced Monte Carlo simulation techniques and sophisticated nonlinear finite element formulations.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.3 no.2
• /
• pp.23-31
• /
• 1997

The results of high speed photography, acoustic emission detection and plasma UV radiation intensity measurement during CO2 laser welding of stainless steel 304 are presented. Video images with high spatial and temporal resolution allowed to observe the melt dynamics and keyhole evolution. The existence of a high speed melt flow which originated from the part of weld pool and flowed along the sides wall of keyhole was confirmed by the slag motion on the weld pool. the characteristic frequencies of flow instability and keyhole fluctuations at different welding speed were measured and compared with the results of Fourier analyses of temporal acoustic emission (AE) and light emission (LE) spectra. The experimental results were compared with the newly developed numerical model of keyhole dynamics. (The model is based on the assumption that the propagation of front part of keyhole into material is due to the melt ejection driven by laser induced surface evaporation.) The calculations predict that a high speed melt flow is induced at the front part of keyhole when the sample travel speed exceeds several 10mm/s. The numerical analysis also shows the hump formation on the front keyhole wall surface. Experimentally observed melt behavior and transformation of the AE and LE spectra with variation of welding speed are qualitatively in good agreement with the model predictions.

• Journal of Korean Academy of Nursing
• /
• v.35 no.4
• /
• pp.721-727
• /
• 2005

Purpose. This cross-sectional survey was conducted to described the compliance of Breast Self-Examination of middle-aged women using a convenient sample, and to examine relationships between the compliance of BSE and Health Beliefs, and the influencing factors on the compliance of BSE. Methods. The subjects were 373 literate volunteers who were from 41 to 60 years of age who visited 6 public health centers. From June 7, 2004 to August 20, 2004, data were collected by 5 research assistants using a self-report questionnaire. The questionnaire was used to obtain information on the general characteristics, knowledge, health beliefs, and compliance of BSE. Results. The findings of this study suggested that there were significant differences in the scores of the perceived susceptibility and severity between compliers and non-compliers of the BSE. BSE compliance was significantly correlated with knowledge, perceived susceptibility, and perceived severity. The most powerful predictor of BSE compliance was the perceived susceptibility. The perceived susceptibility, the perceived severity, the knowledge and educational level accounted for $41.8\%$ of the variance in middle aged women's BSE compliance. Conclusion. Increase in knowledge about breast cancer, with a concomitant increase in both perceived susceptibility and perceived severity could produce a subtle cue or motivating force sufficient to affect a behavior change. Further research is needed to examine the qualitative difference between BSE and other early detection behaviors.

• Journal of Korean Academy of Nursing
• /
• v.34 no.4
• /
• pp.617-624
• /
• 2004

Purpose. Korean American women have twice the rate of cervical cancer than white women and demonstrate low rates in participation in cervical cancer screening. This study was to describe the perceptions about cervical cancer and factors related to cervical cancer screening among Korean American women. Method. Focus group methods. Results. Five themes emerged. First, knowledge about cervical cancer; misconceptions about cervical cancer, its causes, reproductive anatomy and the treatment Second, perceived meanings of having cervical cancer; most of the women felt that cervical cancer represented a loss of femininity and existential value of woman-hood. Third, knowledge about cervical cancer screening; regular medical check-ups were necessary for early detection and prevention of cervical cancer. Forth, experiences and perceived meanings of cervical cancer screening; the participants expressed their feelings; embarrassment, fear, shame and shyness. Fifth, practices of cervical cancer screening; various intervals in participating in cervical cancer screening. But they mentioned several deterrents, language, insurance, time constraint, embarrassment, fear of the screening results, misbelief about susceptibility, lack of health prevention behavior, and lack of information written in Korean. Conclusion: Results emphasize the critical need for culturally appropriate health education to encourage participation of Korean American women in cervical cancer screening.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.1
• /
• pp.159-163
• /
• 2013

A new Rhodamine B hydrazide hydrazone 1 has been synthesized and investigated as a colorimetric and fluorescent "off-on" sensor for the recognition of $Cu^{2+}$ in $CH_3CN/H_2O$ (1:1, v/v, HEPES 10 mM, pH = 7.0) solution. Sensor 1 displayed highly selective, sensitive and rapid recognition behavior toward $Cu^{2+}$ among a range of biologically and environmentally important metal ions. Sensor 1 bind $Cu^{2+}$ via a 1:1 stoichiometry with an association constant of $1.92{\times}10^6\;M^{-1}$, and the detection limit is evaluated to be $7.96{\times}10^{-8}\;M$. The $Cu^{2+}$ recognition event is reversible and is barely interfered by other coexisting metal ions.

• Korean Journal of Optics and Photonics
• /
• v.14 no.2
• /
• pp.130-134
• /
• 2003

We present experimental observations of two-photon spatial bunching effect in a two-photon interference experiment by using the photon pairs produced by parametric down-conversion and the Hong-Ou-Mandel interferometer. We show that this pairing behavior is observed by coincidence detection, but gives a negligible effect for a single count.

• Convergence Security Journal
• /
• v.17 no.2
• /
• pp.69-80
• /
• 2017

Due to the advanced IT environment, the role of Security Monitoring & Control becomes more important as the cyber-crime is becoming intelligent, diversified, and advanced. In contrast to the way it relied solely on security devices such as Firewall and IDS in the past, Security Monitoring & Control tasks responding to cyber attacks through real-time monitoring have become wide spread and their role is also important. In response to current cyber threats, since security equipment alone can not be guaranteed a stable defense, the task of Security Monitoring & Control became essential to operate and monitor security equipment and to respond in real time. In this study, we will discuss how to configure network security system effectively and how to improve the real-time Security Monitor & Control.

• Journal of Information Technology Applications and Management
• /
• v.12 no.2
• /
• pp.1-13
• /
• 2005

This paper proposes a software-reliability growth model incoporating the amount of testing effort expended during the software testing phase after developing it. The time-dependent behavior of testing effort expenditures is described by a Logistic curve. Assuming that the error detection rate to the amount of testing effort spent during the testing phase is proportional to the current error content, a software-reliability growth model is formulated by a nonhomogeneous Poisson process. Using this model the method of data analysis for software reliability measurement is developed. After defining a software reliability, This paper discusses the relations between testing time and reliability and between duration following failure fixing and reliability are studied. SRGM in several literatures has used the exponential curve, Railleigh curve or Weibull curve as an amount of testing effort during software testing phase. However, it might not be appropriate to represent the consumption curve for testing effort by one of already proposed curves in some software development environments. Therefore, this paper shows that a logistic testing-effort function can be adequately expressed as a software development/testing effort curve and that it gives a good predictive capability based on real failure data.