• Journal of Wetlands Research
• /
• v.25 no.3
• /
• pp.184-195
• /
• 2023

To develop an effective management plan for Ambrosia trifida L., an invasive alien plant in Korea, we assessed the potential of Ophraella communa LeSage as a biological control agent. This involved investigating the host specificity of the herbivore Ophraella communa LeSage, its annual travel distance, and the impact of this insect on the fitness of Ambrosia trifida L. We confirmed the host plant preference of Ophraella communa LeSage. The travel distance of this insect was determined by monitoring its appearance in selected Ambrosia trifida L. communities without these insects at distances of 10, 20, 30, and 100 meters, based on the locations where the presence of Ophraella communa LeSage was observed. The growth, reproductive, and physiological responses of Ambrosia trifida L. were measured according to feeding by Ophraella communa LeSage. As a result, Ophraella communa LeSage fed on only three taxa and moved short distances within a radius of 30 m per year from the host. The feeding behavior of the herbivore had a negative impact on the growth, reproductive, and physiological responses of Ambrosia trifida L. And the plant's growth and reproduction improved with increasing distance from the herbivore. Furthermore, the introduction of herbivores was able to control over 90% of Ambrosia trifida L. when the coverage of the Ambrosia trifida L. group was below 50%. However, the effectiveness of the removal decreased when the coverage exceeded 90%. These results are likely to be utilized by Ophraella communa LeSage as an ecological control agent. It is advantageous to introduce them in spring (May) when the coverage is low to maximize the effectiveness of control.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.25 no.1
• /
• pp.5-13
• /
• 2023

This study was conducted to identify items that should be considered in order to increase user satisfaction in the Jayeonmadang project by analyzing the importance and satisfaction targeting Gochang Jayeonmadang users. As a result of analysis on the importance and satisfaction of Gochang Jayeonmadang users focusing on 20 items in 6 fields, Overall, it was analyzed that they were not satisfied as they were important. In order to increase user satisfaction of Gochang Jayeonmadang, maintenance such as 'cleanliness and hygiene', 'water quality', 'vegetation growth', and 'facility management' should be carefully reflected from the planning and design stage, and careful attention should be paid even after the project. In addition, emphasis should be placed on enhancing the user convenience, such as 'accessibility', 'space layout and utilization efficiency', and 'convenience of route'. And, when promoting the Jayeonmadang project, the purpose of the project should be actively promoted to local residents to raise the residents' awareness of the importance of biodiversity in the city.

• Knowledge Management Research
• /
• v.23 no.4
• /
• pp.91-112
• /
• 2022

In order to improve the quality of consumption in senior generation, it is necessary to build trust in the digital consumption environment. However, there are limitations from previous researches on consumption in the digital environment that has mainly focused on Millennial and Z generations. Therefore, this study aims to examine the antecedents of digital consumption trust and to explore the market segments of senior generation created by the dynamics of these antecedents. In addition, in order to provide practical implications, we investigate the difference in the level of perceived digital consumption trust using segmentation. This study, therefore, used 2021 Korea's consumer life index data conducted by the Korea Consumer Agency for general consumers, and only consumer data of 60s and older are extracted for the analysis. As a result, we confirm from the main results that the three antecedents, consumer competency, perceived corporate responsibility, and local community's problem-solving environment, are significant in building the digital consumption trust in the senior generation. It is academically significant in this aspect to look at approaches to improve senior customers' trust in digital consumption circumstances by dividing generations because generations exhibit varying levels of understanding of online consumption or digital consumption conditions. It is academically significant in this aspect to look at approaches to improve senior customers' trust in digital consumption circumstances by dividing generations because generations exhibit varying levels of understanding of online consumption or digital consumption conditions. Additionally, it is proposed as a practical implication that it should be managed so that significant improvements of customers, businesses, and regional public institutions are developed in order to allow the senior consumers to prepare trusted digital consumption circumstances.

• Korea Science and Art Forum
• /
• v.36
• /
• pp.391-400
• /
• 2018

To ensure a user-centered treatment environment, hospital construction needs an approach that is not centered on functional aspects such as efficiency or economic feasibility but on the consideration of needs as reflected in user psychology and behavior. Patients who are physically and psychologically vulnerable experience psychological pressure when they are placed in an unfamiliar environment. Most of existing studies however focus on the evaluation of the physical environment, without paying attention to the psychological or behavioral approach to anxiety and stress that patients may experience in a special environment that a hospital may be to them. This study examines general hospital inpatients to understand the usage of major space available and their satisfaction with privacy. This study provides useful primary information needed for the user-centered design of general hospital for improved patient health and welfare. For the purpose of the study, literature review, site investigation, and survey were conducted. Major functional space and privacy in general hospitals were studied, and the site investigation was performed to identify the plans and their status. Survey was also performed to understand the usage of functional space and satisfaction with such space usage as well as satisfaction with privacy. The findings were as follows: (1) Space usage was rated as average in general. It was found that patients used their rooms and lobby on a daily basis. By age, the usage was highest in the group in their 40s; the usage was relatively lower in the groups in their 30s or younger. (2) Space satisfaction was above average, indicating that patients were fairly satisfied. Satisfaction was highest in the lobby space designed with distinct features. By case, satisfaction was highest in Case B, characterized by its wide horizontal space in the rural settings. (3) Satisfaction with privacy in hospital was average, indicating that the demand for privacy was relatively higher but what patients receive in return was lower than their expectation. It was also found that satisfaction with privacy was a crucial element that affected the overall satisfaction with hospital.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.3A
• /
• pp.201-209
• /
• 2010

Generally, PSC girder bridge uses total gross cross section to resist applied loads unlike reinforced concrete member. Also, it is used as short and middle span (less than 30 m) bridges due to advantages such as ease of design and construction, reduction of cost, and convenience of maintenance. But, due to recent increased public interests for environmental friendly and appearance appealing bridges all over the world, the demands for longer span bridges have been continuously increasing. This trend is shown not only in ordinary long span bridge types such as cable supported bridges but also in PSC girder bridges. In order to meet the increasing demands for new type of long span bridges, PSC hollow box girder with H-type steel as compression reinforcements is developed for bridge with a single span of more than 50 m. The developed PSC girder applies compressive prestressing at H-type compression reinforcements using unbonded PS tendon. The purpose of compressive prestressing is to recover plastic displacement of PSC girder after long term service by releasing the prestressing. The static test composed of 4 different stages in 3-point bending test is performed to verify safety of the bridge. First stage loading is applied until tensile cracks form. Then in second stage, the load is removed and the girder is unloaded. In third stage, after removal of loading, recovery of remaining plastic deformation is verified as the compressive prestressing is removed at H-type reinforcements. Then, in fourth stage, loading is continued until the girder fails. The experimental results showed that the first crack occurs at 1,615 kN with a corresponding displacement of 187.0 mm. The introduction of the additional compressive stress in the lower part of the girder from the removal of unbonded compressive prestressing of the H-type steel showed a capacity improvement of about 60% (7.7 mm) recovery of the residual deformation (18.7 mm) that occurred from load increase. By using prestressed H-type steel as compression reinforcements in the upper part of cross section, repair and rehabilitation of PSC girders are relatively easy, and the cost of maintenance is expected to decrease.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.3A
• /
• pp.297-307
• /
• 2010

Recently, maintenance engineering and technology for civil and building structures have begun to draw big attention and actually the number of structures that need to be evaluate on structural safety due to deterioration and performance degradation of structures are rapidly increasing. When stiffness is decreased because of deterioration of structures and member cracks, dynamic characteristics of structures would be changed. And it is important that the damaged areas and extent of the damage are correctly evaluated by analyzing dynamic characteristics from the actual behavior of a structure. In general, typical measurement instruments used for structure monitoring are dynamic instruments. Existing dynamic instruments are not easy to obtain reliable data when the cable connecting measurement sensors and device is long, and have uneconomical for 1 to 1 connection process between each sensor and instrument. Therefore, a method without attaching sensors to measure vibration at a long range is required. The representative applicable non-contact methods to measure the vibration of structures are laser doppler effect, a method using GPS, and image processing technique. The method using laser doppler effect shows relatively high accuracy but uneconomical while the method using GPS requires expensive equipment, and has its signal's own error and limited speed of sampling rate. But the method using image signal is simple and economical, and is proper to get vibration of inaccessible structures and dynamic characteristics. Image signals of camera instead of sensors had been recently used by many researchers. But the existing method, which records a point of a target attached on a structure and then measures vibration using image processing technique, could have relatively the limited objects of measurement. Therefore, this study conducted shaking table test and field load test to verify the validity of the method that can measure multi-point displacement responses of structures using image processing technique.

• Korean Journal of Culture and Social Issue
• /
• v.21 no.4
• /
• pp.617-647
• /
• 2015

The purposes of this study was to develop a valid scale measuring organization-related anxiety and to use this scale to examine the relation of organizational anxiety to demographic variables, job satisfaction and organizational committment. A series of studies were conducted to develop a scale for organizational anxiety. Initially, the 97 items were adopted by expert ratings. A exploratory factor analysis with a sample of 435 workers yielded a preliminary version of organizational anxiety scale with 28 items. Subsequently, a confirmatory factor analysis was conducted with a sample of 566 workers, leaving 20 items. The final version of the organizational anxiety scale consisted of 4 sub-factors: perception of future uncertainty, perception of locus of control, interpersonal anxiety, and perception of alternatives. In this study, the examined demographic characteristics included sex, age, type of occupation, type of industry, occupational position, monthly income and educational level. Organizational effectiveness was composed of job satisfaction and organizational commitment. As mediators, organizational culture, life satisfaction, self efficacy, and social support were explored. The negative relationship was observed between organizational anxiety and organizational effectiveness. The results showed the significant differences in organizational anxiety by demographic characteristics. The mediators were explored for the relationship between organizational anxiety and job satisfaction and between organizational anxiety and organizational commitment. The negative relationship between organizational anxiety and job satisfaction was mediated by the group culture, the developmental culture, the rational culture, life satisfaction, self-efficacy, and social support. Individuals with the higher level of these mediators reported greater job satisfaction even if they experienced organizational anxiety. The partial mediation effect of the group culture, the developmental culture, the rational culture, life satisfaction, and social support was observed on the negative relationship between organizational anxiety and organizational commitment. These results implies that job satisfaction and organizational commitment can be improved with the interventions on organizational cultures, self-efficacy, and social support despite the presence of organizational anxiety. Based on these results, the implication and limitations of this study and the directions for future research discussed.

• Korean Journal of Culture and Social Issue
• /
• v.23 no.2
• /
• pp.295-332
• /
• 2017

The main purpose of this research is to analyze stress, social support and coping behavior of adults based on their level of self-efficacy. A total of 899 adults (399 male; 500 female), each with a child attending either elementary and secondary school, participated in the study. The inter-rater reliability for the open-ended questionnaire utilized in the study was 93.4%, with a Kappa coefficient of .92. The range of Cronbach α for the variables measured through a quantitative method was .87~.92. The results were as follows: First, the representative responses to the question about their most painful stress experiences were, financial difficulties, child rearing and duties of workplace. The Lower Efficacy group, compared to the Upper Efficacy group, responded much more with financial difficulties related responses. There were significant differences in the level of stress symptoms according to level of self-efficacy. The Lower Efficacy group expressed stronger levels of stress symptoms when compared to the Upper Efficacy group. Second, in terms of social support, the participants responded that they received the most help from their family members, followed by none(self), and friends. When comparing the two efficacy groups, the Upper Efficacy group responded most frequently that they received social support from their family members, whereas the Lower Efficacy group indicated none. There were significant differences in the level of relational conflicts according to the level of self-efficacy. The Upper Efficacy group showed much less conflict in parent-child relations, spousal relations and relations with their boss, compared to the Lower Efficacy group. Third, for the type of social support participants received, the most frequent response was emotional support, followed by none, and advice. Relatively, when comparing the two groups with each other, the Lower Efficacy group responded more frequently with none, whereas for the Upper Efficacy group responded more frequently with advice. There were significant differences in the amount of emotional support received according to level of self-efficacy. The Upper Efficacy group received much more emotional support from their spouses and their bosses compared to the Lower Efficacy group. Fourth, the most frequently adopted coping style to stress was self-regulation, followed by direct problem solving, and nothing(none). The most frequent response for the Upper Efficacy group was direct problem solving, whereas for the Lower Efficacy group was nothing(none). There was a significant difference in coping efficiency to stress according to level of self-efficacy. The Upper Efficacy group coped more efficiently with stress than the Lower Efficacy group.

• Journal of Practical Engineering Education
• /
• v.15 no.1
• /
• pp.119-126
• /
• 2023

Today, in order to improve fuel efficiency and dynamic behavior of automobiles, an era of light weight and simplification of automobile parts is being formed. In order to simplify and design and manufacture the shape of the product, various components are integrated. For example, in order to commercialize three products into one product, product processing is occurring to a very narrow area. In the case of existing parts, precision die casting or casting production is used for processing convenience, and the multi-piece method requires a lot of processes and reduces the precision and strength of the parts. It is very advantageous to manufacture integrally to simplify the processing air and secure the strength of the parts, but if a deep and narrow pocket part needs to be processed, it cannot be processed with the equipment's own spindle. To solve a problem, research on cutting processing is being actively conducted, and multi-axis composite processing technology not only solves this problem. It has many advantages, such as being able to cut into composite shapes that have been difficult to flexibly cut through various processes with one machine tool so far. However, the reality is that expensive equipment increases manufacturing costs and lacks engineers who can operate the machine. In the five-axis cutting processing machine, when producing products with deep and narrow sections, the cycle time increases in product production due to the indirectness of tools, and many problems occur in processing. Therefore, dedicated machine tools and multi-axis composite machines should be used. Alternatively, an angle spindle may be used as a special tool capable of multi-axis composite machining of five or more axes in a three-axis machining center. Various and continuous studies are needed in areas such as processing vibration absorption, low heat generation and operational stability, excellent dimensional stability, and strength securing by using the angle spindle.

• Korean Journal of Remote Sensing
• /
• v.39 no.5_1
• /
• pp.589-597
• /
• 2023

Floating debris in large quantities from land during heavy rainfall has adverse social, economic, and environmental impacts, but the monitoring system for the concentration area and amount is insufficient. In this study, we proposed an efficient monitoring method for floating debris entering the river during heavy rainfall in Daecheong Lake, the largest water supply source in the central region, and applied remote sensing techniques to estimate the standing-stock of floating debris. To investigate the status of floating debris in the upper of Daecheong Lake, we used a tracking buoy equipped with a low-orbit satellite communication terminal to identify the movement route and behavior characteristics, and used a drone to estimate the potential concentration area and standing-stock of floating debris. The location tracking buoys moved rapidly during the period when the cumulative rainfall for 3 days increased by more than 200 to 300 mm. In the case of Hotan Bridge, which showed the longest distance, it moved about 72.8 km for one day, and the maximum moving speed at this time was 5.71 km/h. As a result of calculating the standing-stock of floating debris using a drone after heavy rainfall, it was found to be 658.8 to 9,165.4 tons, with the largest amount occurring in the Seokhori area. In this study, we were able to identify the main concentrations of floating debris by using location-tracking buoys and drones. It is believed that remote sensing-based monitoring methods, which are more mobile and quicker than traditional monitoring methods, can contribute to reducing the cost of collecting and processing large amounts of floating debris that flows in during heavy rain periods in the future.