• Korean Journal of Materials Research
• /
• v.14 no.9
• /
• pp.676-681
• /
• 2004

In-situ observation in SBM on the microfracture behavior of coating layer was performed for GA steel sheets that have various Fe contents and thickness of coating layer. In case of cross sectional side of coating layer that was in a tensile stress state during bending, fine perpendicular crack pre-induced during galvannealing grew and propagated rapidly toward the coating surface with the increase of strain. And then it grew and propagated along the ${\Gamma}/Fe$ matrix interface, and combined with the nearest another perpendicular crack. Consequently, flaking occurred. The more Fe content and thickness of coating layer increased, the more average crack interval and flaking resistivity increased. Exfoliation was little observed at coating surface in a tensile stress state.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.8
• /
• pp.47-54
• /
• 2020

Developmental disorders are impairments of brain and/or central nervous system and refer to a disorder of brain function that affects languages, communication skills, perception, sociality and so on. In diagnosis of developmental disorders, behavioral response such as expressing emotions in proper situation is one of observable indicators that tells whether or not individual has the disorders. However, diagnosis by observation can allow subjective evaluation that leads erroneous conclusion. This research presents the technological environment and data acquisition system for AI based screening of autism disorder. The environment was built considering activities for two screening protocols, namely Autism Diagnostic Observation Schedule (ADOS) and Behavior Development Screening for Toddler (BeDevel). The activities between therapist and baby during the screening are fully recorded. The proposed software in this research was designed to support recording, monitoring and data tagging for learning AI algorithms.

• Korean Journal of Metals and Materials
• /
• v.46 no.12
• /
• pp.771-779
• /
• 2008

An effective way of increasing the strength and fracture toughness of reactor pressure vessel steels is to change the material specification from that of Mn-Mo-Ni low alloy steel(SA508 Gr.3) to Ni-Mo-Cr low alloy steel(SA508 Gr.4N). In this study, we evaluate the effects of alloying elements on the microstructural characteristics of Ni-Mo-Cr low alloy steel. The changes in the stable phase of the SA508 Gr.4N low alloy steel with alloying elements were evaluated by means of a thermodynamic calculation conducted with the software ThermoCalc. The changes were then compared with the observed microstructural results. The calculation of Ni-Mo-Cr low alloy steels confirms that the ferrite formation temperature decreases as the Ni content increases because of the austenite stabilization effect. Consequently, in the microscopic observation, the lath martensitic structure becomes finer as the Ni content increases. However, Ni does not affect the carbide phases such as $M_{23}C_6 $ and $M_7C_3$. When the Cr content decreases, the carbide phases become unstable and carbide coarsening can be observed. With an increase in the Mo content, the $M_2C$ phase becomes stable instead of the $M_7C_3$ phase. This behavior is also observed in TEM. From the calculation results and the observation results of the microstructure, the thermodynamic calculation can be used to predict the precipitation behavior.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.221-221
• /
• 2022

Chromosome breakage occurred by DNA methylation inhibitor. Zebularine is known as DNA methylation inhibitor and suitable for water solubility among different DNA methylation inhibitors as 5-Azacytidine and 5-aza-2'-deoxycytidine. We used zebularine as mutagen according to different methods by roots absorption and seed imbibition. After zebularine treatment, DNA methylation inhibitor, we observed mitotic chromosome behavior what is different according to two different treatment methods. First, seed imbibition treatment in 1,000 μM of zebularine solution for 72 hours in dark conditions. The second treatment to seedlings of Keumkang was also treated in 1,000 μM of zebularine solution for 72 hours after germination. Root and shoot showed different elongations in each treatment. Root absorption treatment(3.01±0.48, 2.00±0.26) showed the shortest elongation in root and shoot than control(8.16±0.61, 4.03±0.48) and seed imbibition treatment(4.33±0.80, 2.48±0.36). It can be explained root tip meristematic cell activity was damaged by DNA methylation inhibitor. Primary root tips were collected in DW for 24 hours at low temperature(0℃) and fixed in fixation solution for 3 days to chromosome observation in mitosis. Mitotic index, chromosome structure and chromosome aberration were observed by phase-contrast microscope. Mitotic index of the control(0.29) showed twice mitotic cells as the treated groups(imbibition 0.15, absorption 0.14). Observation of chromosomes showed some short chromosomes and loosen chromosomes affected by zebularine. It is considered because of zebularine damage DNA in mitosis. We observed "gap by chromosome breakage" in chromosomes that have loose parts between centromere and telomere. It seems demethylation of zebularine occurs chromosome breakage.

• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.12
• /
• pp.1717-1725
• /
• 2013

The objectives of this study were to compare visual observation and an electronic grazing time method and to evaluate the effects of nutritional plans on intake, grazing behavior and horizontal and vertical locomotion of young bulls in a tropical pasture. Thirty-nine Nellore young bulls with an average body weight of $345{\pm}9.3$ kg kept in pasture were used. The experimental treatments consisted of: restricted: animals kept in a plot with a low mass of forage receiving mineral mixture only; control: animals receiving mineral mixture only; HPHC: a high protein and high carbohydrate supplement; HPLC: a high protein and low carbohydrate supplement; LPHC: a low protein and high carbohydrate supplement; LPLC: a low protein and low carbohydrate supplement. GPS collars equipped with activity sensors were used. Information about head position, latitude, longitude and altitude were recorded. Daytime grazing behavioral patterns monitored by a continuous focal animal recording method was compared to behavior estimated by the activity sensor. Feed intake was estimated by a marker method. The Restricted group presented lower (p<0.05) intake of dry matter and TDN. However, difference in dry matter intake was not found (p>0.05) between non-supplemented and supplemented animals. Difference was not found (p>0.05) in daytime grazing time obtained by visual observation or the activity sensor method. The restricted group showed longer (p<0.05) grazing time (9.58 h/d) than other groups, but difference was not found (p>0.05) in the grazing time between Control (8.35 h/d) and supplemented animals (8.03 h/d). The Restricted group presented lower (p<0.05) horizontal locomotion distance (2,168 m/d) in comparison to other groups (2,580.6 m/d). It can be concluded that the use of activity sensor methods can be recommended due to their being similar to visual observation and able to record 24-h/d. While supplements with high carbohydrates reduce pasture intake, they do not change grazing behavior. Moderate supplementation (until 50% of protein requirement and 30% of energy requirement) of beef cattle on tropical pasture has no effect on daily locomotion.

• Korean Journal of Human Ecology
• /
• v.14 no.4
• /
• pp.593-611
• /
• 2005

The purpose of this study is to explore the consumption cultural meaning of Community Currency Movement - a substitute currency institution - through an analysis of consumption behaviors and attitudes of Hanbat-LETS participants, who are recognized as the most active among Korea Community Currency Movements. The analytical method adopted in this study is the participation and observation method, along with the Focus Group Interview. Major findings are as follows: Hanbat-LETS participants experienced the following consumption behaviors and attitudes: economical consumption behavior creating the currency value, sustainable consumption behavior, consumption behavior shared with community, consumption behavior free from the need of competition and ownership, satisfaction from offering one's property, equal status and relationship among members, merry and happy attitude toward life. Community Currency Movement implies the consumption cultural meaning as followings: emergence of alienation through the realization of community society, practice of environment-friendly value, activation of region economy, development of one's ability and means of redemption of unemployment, construction of trustworthy society via trust.

• Journal of Korean Library and Information Science Society
• /
• v.43 no.3
• /
• pp.49-77
• /
• 2012

The purpose of this study is to investigate the values and meanings of university libraries and library catalog in the learning activities of Korean college students. Discussed in details are unique features in their library use behavior and catalog search behavior, and critical factors influencing their behavioral characteristics. A qualitative approach was employed for data collection and analysis. Intensive interviews were conducted with 30 students, also utilized was tight and close observation of their library search behavior. The result of this study is on identifying the underlying reasons why Korean students use their libraries and catalogs in a passive and limited manner.

• Journal of the Korean Magnetics Society
• /
• v.25 no.6
• /
• pp.180-184
• /
• 2015

We have investigated the magnetization reversal behavior in ferromagnetic $Co_{0.5}Fe_{0.5}$ alloy films using the magneto-optical Kerr microscope capable of the direct observation of time-resolved domain patterns. Interestingly enough, as the sample thickness increases the magnetization reversal behavior becomes changed from a single domain wall motion to the random nucleations of domains. Also, from the stochastic analysis of the domain jump sizes during the domain wall motion, it was found that the magnetization reversal behavior in the samples shows the critical scaling behavior with the critical exponent of ${\tau}{\sim}1.33$.

• The Research Journal of the Costume Culture
• /
• v.14 no.6
• /
• pp.900-916
• /
• 2006

The purposes of this study were to define housewife's risk perception and risk reduction behavior when purchasing children's wear, and to identify the differences according to the clothing buying behavior and demographic characteristics. Data were gathered through survey with 429 housewives in Seoul and metropolitan area, and then statistically analyzed by descriptive statistics, factor analysis, Analysis of Variance (ANOVA), Duncan's test, and Pearson's correlation analysis. The results showed partially significant differences in risk perception, especially economic risk and social psychological risks, among housewife consumer groups according to the clothing buying behavior and the demographic characteristics. There were significant differences in risk reduction behaviors among the groups, especially brand preference/industry information, observation/experience, and media information. Also, correlations between risk perception and risk reduction behaviors were found. The social psychological risk perception was highly correlated to the risk reduction behaviors, while the time/convenience loss risk was not correlated to any risk reduction behavior. The results of this study provide insight into children's wear business through suggesting marketing implication.

• Tribology and Lubricants
• /
• v.32 no.6
• /
• pp.195-200
• /
• 2016

This study examines the wear behavior of mild steel pins mated against alloyed tool steel discs in a pin-on-disc type sliding test machine and provides specific clarification regarding the effects of disc hardness on the wear behavior of a mating mild steel pin. The analysis confirms these effects through the observation of differences in the wear rates of the mild steel pins at low sliding speed ranges. These differences occur even though the hardness of the mating disc does not affect the wear characteristic curve patterns for the sliding speeds, regardless of the wear regime. In the running-in wear regime, increasing the hardness of the mating disc results in a decrease in the wear rates of the mild steel pins at low sliding speed ranges. However, in the steady-state wear region, the wear rate of a pin mated against the 42DISC is greater than the wear rate of a pin mated against the 30DISC, which has a lower hardness value. This means that the tribochemical reactivity of the mating disc, which is based on hardness value, influences the wear behavior of mild steel at low sliding speed ranges. In particular, oxides with higher oxygen contents, such as $Fe_2O_3$ oxides, form predominantly on the worn surface of the 42DISC. On the contrary, the wear behavior of mild steel pins at high sliding speed ranges is nearly unaffected by the hardness of the mating disc.