• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.1
• /
• pp.39-46
• /
• 2011

NO oxidation is an important prerequisite step to assist the selective catalytic reduction (SCR) at low temperatures ($<200^{\circ}C$). Therefore, we conducted the lab- and bench-scales experiments appling the sodium chlorite powder ($NaClO_2(s)$) for the oxidation of NO to $NO_2$ and the carbon-based catalyst for the reduction of $NO_x$ and $SO_2$; the lab- and bench-scales experiments were conducted in laboratory and iron-ore sintering plant, respectively. In the lab-scale experiment, known concentrations of $NO_x$ (200 ppm), $SO_2$ (75 ppm), $H_2O$ (10%) and $NH_3$ (400 ppm) in 2.6 L/min were introduced into a packed-bed reactor containing $NaClO_2(s)$, then gases produced by the reaction with $NaClO_2(s)$ were fed into the carbon-based catalyst (space velocity = $2,000hr^{-1}$) at $130^{\circ}C$. In the bench-scale experiment, flue gases of $50Nm^3/hr$ containing 120 ppm NO and 150 ppm $SO_2$ were taken out from the duct of iron-ore sintering plant, then introduced into the flow reactor; $NaClO_2(s)$ were injected into the flow reactor using a screw feeder. Gases produced by the reaction with $NaClO_2(s)$ were introduced into the carbon-based catalyst (space velocity = $1,000hr^{-1}$). Results have shown that, in both lab- and bench-scales experiments, NO was oxidized to $NO_2$ by $NaClO_2(s)$. In addition, above 90% of $NO_x$ and $SO_2$ removal were obtained at the carbon-based catalyst. These results lead us to suggest that the combination of $NaClO_2(s)$ with the carbon-based catalyst has the potential to achieve the simultaneous removal of $NO_x$ and $SO_2$ at low temperature ($<200^{\circ}C$).

• Korean Journal of Agricultural Science
• /
• v.1 no.1
• /
• pp.9-26
• /
• 1974

1. Results in Nursery This experiment was carried out on the effect of the seed treament, soil preparations, kinds of covering soil and inside covering methods in two rice varieties, 'Tongil' and 'Akibare' to find out the most reasonable model of the flat nursery bed, with which lower cost is required comparing with the tunnel nursery. The results obtained are as follows: (1) The seedling of all plots of the ordinary seed were very poor compared to the plots of sprouted seed. (2) In case that the variety 'Tongil' was cultivated on the dry nursery bed, the good seedling percentage and the plant height rat io were significantly increased but the other characteristics of the seedling were not noticeable. (3) The kinds of the covering soil had not an effect on the seedling growth significantly. (4) Inside straw mulching was seemed effective for the protection in the case of the extreme high temperature and heavy rain fall, even though there was not significant differences between inside straw mulching and no treatments at the flat type nursery. (5) Difference of seedling growth between the flat type nursery and the tunnel type nursery was not significant. And it's reason was thought that the covering period of polyethylene film was short in semi hot nursery for the common early transplanting cultivation of rice. (6) The percentage of good seedling was higher at 'Akibare' than 'Tongil', variety but the number of seedling leaf and the seedling growth ratio in height were significantly increased in the variety 'Tongil'. The other seedling characters between there two varieties were not significantly different. 2. Results after transplanting This experiment was conducted to study on the ripening percentage, rice yield and disease, appearance of the seedling from sprouted seed plots including common irrigated nursery as check plot after transplantnig. The results obtained are summarized as follows: (1) The rice yield, the yield components and the appearance of leaf discoloration of both varieties, 'Tongil' and 'Akibare' were slightly betterat the plot of the standard tunnel nursery than that of the flat nursery with inside mulching or the among these three plots. (2) For 'Tongil' variety, the ripening percentage and the rice yield were significantly decreased at the common irrigated nursery compared with semi hot nursery. (3) The ripening percentage and the rice yield of 'Akibare' contrasted with 'Tongil' were significantly decreased at thesemi 'hot-nursery compared with common irrigated nursery. The main reason was thought to be the injury of the rice stripe disease (Rice stripe disease virus). Considering above mentioned experimental result, the seedling of 'Tongil' must be cultivated on the semi bot nursery for better ripening percentage as well as rice yield and for prevention of red discoloration. And as a model of semi hot nursery, the polyethylene covering nursery of standard tunnel type is most desirable but that of flat type with inside straw mulching is thought to be desirable too.

• Journal of Korean Society of Forest Science
• /
• v.9 no.1
• /
• pp.1-44
• /
• 1969

The important results which have been obtained in the investigation can be recapitulated as follows. 1. As demostrated by the experimental results and analyses concerning their effects in the on-ground type mushroom house, the constructions in relation to the side wall and ceiling of the experimental houses showed a sufficient heat insulation on effect to protect insides of the houses from outside climatic conditions. 2. As the effect on the solar type experimental mushroom house which was constructed in a half basement has been shown by the experimental results and analyses, it has been proved to be effective for making use of solar heat. However there were found two problems to be improved for putting solar houses to practical use in the farm mushroom growing: (1) the construction of the roof and ceiling should be the same as for the on-ground type house, and (2) the solar heat generating system should be reconstructed properly. A trial solar heat generating system is shown in Fig. 40. 3. Among several ventilation systems which have been studied in the experiments, the underground earthen pipe and ceiling ventilation, and vertical side wall and ceiling ventilation systems have been proved to be most effective for natural ventilation. 4. The experimental results have shown that ventilation systems such as the vertical side wall and underground ventilation systems are suitable to put to practical use as natural ventilation systems for farm mushroom houses. These ventilation systems can remarkably improve the temperature of fresh air which is introduced into the house by heat transfers within the ventilation passages, so as to approach to the desired temperature of the house without any cooling or heating operation. For example, if it is assuming that x is the outside temperature and y is the amount of temperature adjustment made by the influence of the ventilation system, the relationships that exist between x and y can be expressed by the following regression lines. Underground iron pipe ventilation system ${\cdots}{\cdots}$ y=0.9x-12.8 Underground earthen pipe ventilation system ${\cdots}{\cdots}$y=0.96x-15.11 Vertical side wall ventilation system${\cdots}{\cdots}$ y=0.94x-17.57 5. The experimental results have shown that the relationships existing between the admitted and expelled air and the $Co_2$ concentration can be described with experimental regression lines or an exponent equation as follows: 1) If it is assumed that x is an air speed cm/sec. and y is an expelled air speed in cm/sec. in a natural ventilation system, since the y is a function of the x, the relationships that exist between x and y can be expressed by the regression lines shown below: 2) If it is assumed that x is an admitted volume of air in $m^3/hr$ and y is an expelled volume of air in $m^3/hr$ in a natural ventilation system, since the y is a function of the x, the relationships that exist between x and y can be expressed by the regression lines shown below. 3) If it is assumed that the expelled air speed in cm/sec and replacement air speed in cm/sec. at the bed surface in a natural ventilation system are shown as x and y, respectively, since the y is a function of the x, the relationships that exist between x and y can be expressed by the following regression line: G.E. (100%)- C.V. (50%) ventilation system${\cdots}$ y=0.54X+0.84 4) If it is assumed that the replacement air speed in cm/sec. at the bed surface is shown as x, and $CO_2$ concentration which is expressed by multiplying 1000 times the actual value of $CO_2$ % is shown as y, in a natural ventilation system, since the y is a function of the x the relationships that exist between x and y can be expressed by the following regression line: G.E. (100%)- C.V. (50%) ventilation system${\cdots}{\cdots}$ y=114.53-6.42x 5) If it is assumed that the expelled volume of air is shown as x and the $CO_2$ concentration which is expressed by multiplying 1000 times the actual of $CO_2$ % is shown as y in a natural ventilation system, since the y is a function of of the x, the relationships that exist between x and y can be expressed by the following exponent equation: G.E. (100%)-C.V. (50%) ventilation system${\cdots}{\cdots}$ $$y=127.18{\times}1.0093^{-X}$$ 6. The experimental results have shown that the ratios of the crass sectional area of the G.E. and C.V. vent to the total cubic capacity of the house, required for providing an adequate amount of air in a natural ventilation system, can be estimated as follows: G.E. (admitting vent of the underground ventilation)${\cdots}{\cdots}$ 0.30-0.5% (controllable) C.V. (expelling vent of the ceiling ventilation)${\cdots}{\cdots}$ 0.8-1.0% (controllable) 7. Among several heating devices which were studied in the experiments, the hot-water boilor which was modified to be fitted both as hot-water toiler and as a pressureless steam-water was found most suitable for farm mushroom growing.

• Korean Chemical Engineering Research
• /
• v.52 no.5
• /
• pp.657-666
• /
• 2014

Coal gasification technology is considered as next generation clean coal technology even though it uses coal as fuel which releases huge amount of greenhouse gas because it has many advantages for carbon capture. Coal or pet-coke slurry gasification is very attractive technology at present and in the future because of its low construction cost and flexibility of slurry feeding system in spite of lower efficiency compared to dry feeding technology. In this study, we carried out gasification experiment using bituminous coal slurry sample by integrating coal slurry feeding facility and slurry burner into existing dry feeding compact gasifier. Especially, our experiment was conducted under fairly lower operation temperature than that of existing entrained-bed gasifier, resulting in partial slagging operation mode in which only part of ash was converted to slag and the rest of ash was released as fly ash. Carbon conversion rate was calculated from data analysis of collected slag and ash, and then cold gas efficiency, which is the most important indicator of gasifier performance, was estimated by carbon mass balance method. Fairly high performance considering pilot-scale experiment, 98.5% of carbon conversion and 60.4% of cold gas efficiency, was achieved. In addition, soundness of experimental result was verified from the comparison with chemical equilibrium composition and energy balance calculations.

• Korean Journal of Ichthyology
• /
• v.3 no.1
• /
• pp.1-10
• /
• 1991

Spawning behavior and development of eggs and larvae of Mugilogobius abei were observed in the laboratory at Pusan, Korea. The adult male of Mugilogobius abei was observed making nest-like spawning-bed to lay eggs and showing territorial and courtship behaviors. The eggs were transparent and spherical in shape, measuring 0.40~0.50 mm in diameter. They have a bundle of adhesive filaments at their basal end and a cluster of small oil globules. The eggs became ellipsoid shape after the insemination and measured about 0.93~0.96 mm on the long axis. Hatching began about 110 hours after fertilization at water temperature of $24.5{\sim}25.5^{\circ}C$. The newly hatched larvae were 2.04~2.10 mm in total length, with 24~25(8~9+16) myomeres. Many melanophore and guanophore are distributed on eye cups, gas bladder, optic vesicle and the caudal region. Four days after hatching the yolk and oil-globule were completely absorbed and the larvae attained a total length 2.20~2.35 mm. The larvae swam actively in the aquarium and start to practice feeding on the rotifer. Twelve days after hatching, the larvae averaged 3.20 mm in TL and the caudal notochord flex at $45^{\circ}$. Rudimental second dorsal, anal, caudal and ventral fins are also formed. The larvae attained 10.40~10.80 mm in TL, 35 days after hatching, are found to start the bottom-life after having completely formed first dorsal and ventral fins. The larvae reached the juvenile stage at 50~60 days after hatching and attained 15.37~20.25 mm in TL. At this period all scales appeared on the body.

• Korean Journal of Environmental Agriculture
• /
• v.32 no.3
• /
• pp.193-200
• /
• 2013

BACKGROUND: Plant factory system of an artificial light type using Light-Emitting Diodes (LEDs), fluorescent light, or metal halide lamp instead of sun light is an ultimated method for plant production without any pesticides regardless of seasonal changes. The plant factory is also completely isolated from outside environmental conditions such as a light, temperature, or humidity compared to conventional greenhouse. Light-environment control such as a quality or quantity in the plant factory system is essential for improving the growth and development of plant species. However, there was little report that the effects of various light qualities provided by LEDs on Ledebouriella seseloides growth under the plant factory system. METHODS AND RESULTS: Ledebouriella seseloides seedlings transplanted at urethane sponge were grown in the plant factory system of a horizontal type with LED artificial lights for 90 days. Yamazaki solution for hydroponic culture of the seedlings was regularly irrigated by the deep flow technique (DFT) system on the culture gutters. Electrical Conductivity (EC) and pH of the solution was recorded at 1.4 ds/m and 5.8 in average, respectively during the experimental period. Number of unfolded leaves, leaf length, shoot fresh and dry weight of the seedlings were three times measured in every 30 days after beginning of the experiment. Blue LEDs, red LEDs, and fluorescent lights inside the plant factory were used as light sources. Conventional fluorescent lamps were considered as a control. In all the treatment, light intensity was maintained at $100{\mu}mol/m^2/s$ on the culture bed. Fresh weight of the seedlings was 3.7 times greater in the treatment with the mixture radiation of fluorescent light and blue+red LEDs (1:3 in energy ratio; Treatment FLBR13) than in fluorescent light treatment (Treatment FL). In FLBR13 treatment, dry weight per seedling was two times greater than in FL or BR11 treatment of blue+red LEDs (1:3 in energy ratio; Treatment BR11) during the culture period. Increasing in number of unfolded leaves was also significantly affected by the FLBR13 treatment comparing with BR11 treatment. CONCLUSION(S): Hydroponic culture of Ledebouriella seseloides seedlings was successfully achieved in the plant factory system with mixture lights of blue, red LEDs and fluorescent lights. Shoot growth of the seedlings was significantly promoted by the FLBR13 with the mixture radiation of fluorescent light, blue, and red LEDs under 1:3 mixture ratio of blue and red LEDs during the experimental period compared to conventional light conditions.

• Journal of Chest Surgery
• /
• v.9 no.1
• /
• pp.1-9
• /
• 1976

The present. study reports four cases of congenital heart diseases, who received open heart surgery by the Sarn's Heart-Lung-Machine in the department of Thoracic Surgery, Hanyang University Hospital during the period between July 1975 and May 1976. The Heart-Lung-Machine consisted of the Sarn's five head roller pump motor system (model 5000), heat exchanger, bubble trap, the Rygg-Kyvsgaard oxygenator, and monitors. The priming of pump oxygenator was carried out by the hemodilution method using Hartman's solution and whole blood. Of the four cases of the heart diseases, three whose body weight were below 30kg, received the partial hemodilution priming and the remaining one whose body weight was 52kg received the total hemodilution priming with Hartman's solution alone. The rate of hemodilution was in the average of 60.5ml/kg. Extracorporeal circulation was performed at the perfusion flow rate of the average 94.0ml/kg/min, and at the moderate hypothermia between 35'5"C and 30'5"C of the rectal temperature. In the total cardiopulmonary bypass, arterial blood pressure was anged between 30 mmHg and 85 mmHg, generally maintaining over 60 mmHg and venous pressure was measured between 4 and $23cmH_2O$, generally maintaining below $10cmH_2O$. The first case: The patient, a nine year old girl having the symptoms and physical signs typical to cardiac anomaly was definitely diagnosed as isolated pulmonary stenosis through the cardiac catheterization. There was, however, no cyanosis, no pathological finding by X-ray and E.C.G. tracings. The valvulotomy was performed through the arteriotomy of pulmouary artery under the total cardiopulmonary bypass. Postoperative course of the patient was uneventful, and murmur and the clinical symptoms disappeared. The second case: A 12 year old boy with congenital heart anomaly was positively identified as having ventricular septal defect through the cardiac catheterization. As in the case with the first case, the patient exhibited the symptoms and physical signs typical to cardiac anomaly, but no pathological abnormality by X-ray and E.C.G. tracings. The septal defect was localized on atrioventricular canal and was 2 by 10 mm in size. The septal defect was closed by direct simple sutures under the cardiopulmonary bypass. Postoperative hemodynamic study revealed that the pressure of the right ventricle and pulmonary artery were decreased satisfactory. Postoperative course of the patient was uneventful, and murmur and the clinical symptoms disappeared. The third case: The patient, a 19 year old girl had been experienced the clinical symptoms typical to cardiac anomaly for 16 years. The pink tetralogy of Fallot was definitey diagnosed through the cardiac catheterization. The patient was placed on an ablolute bed rest prior to the operation because of severe exertional dyspnea, fatigability, and frequent syncopal attacks. However, she exhibited very slight cyanosis. Positive findings were noted on E.C.G. tracings and blood picture, but no evidence of pathological abnormality on X-ray was observed. All of the four surgical approaches such as Teflon patch closure (3 by 4cm in size) of ventricular septal defect, myocardial resection of right ventricular outflow tract, valvulotomy of pulmonary valvular stenosis, and pericardial patch closing of ventriculotomy wound were performed in 95 minutes under the cardiopulmonary bypass. Postoperative hemodynamic study revealed that the pressure of the right ventricle was decreased and pulmonary artery was increased satisfactorily. Postoperative course of the patient was uneventful, and murmur and the clinical symptoms disappeared. The fourth case: The patient, a 7 1/4 year old girl had the symptoms of cardiac anomaly for only three years prior to the operation. She was positively identified as having acyanotic tetralogy of Fallot by open heart surgery. The patient showed positive findings by X-ray and E.C.G. tracings, but exhibited no cyanosis and normal blood picture. All of the three surgical approaches, such a myocardial resection of hypertrophic sight ventricular outflow tract, direct suture closing of ventricular septal defect and pericardial patch closing of ventriculotomy wound were carried out in 110 minutes under the cardiopulmonary bypass. Postoperative hemodynamic study revealed that the pressure of the right ventricle was decreased and pulmonary artery was increased satisfactorily. Postoperative course of the patient was uneventful, and the symptoms disappeared.

• The Korean Journal of Mycology
• /
• v.30 no.2
• /
• pp.86-94
• /
• 2002

Recently a serious outbreak of weed mould caused by a species of Hypocrea occurred in oyster mushroom (Pleurotus ostreatus) substrates in Korea. The disease was characterized by a rapid infestation of the oyster mushroom substrates by Hypocrea sp. and subsequent inhibition of fructification of the mushroom. In spite of it's serious losses to the oyster mushroom industry in Korea, etiology and ecology of the disease have not been studied. Morphological characteristics of the fungus were examined and molecular characteristics of the fungus were compared with those of the green moulds (Trichoderma spp.) isolated from oyster mushroom bed. Stromata formed superficially on suface of the substrates were pulvinate to effuse or irreguler, initially white but becoming yellowish brown, measuring $6.0{\sim}13.0{\times}3.0{\sim}11.0mm$. Perithecia were globose to subglobose, immersed in stroma, $223{\sim}263\;(Ave.239.9){\times}167.3{\sim}231\;(Ave.204.1){\mu}m$ in size. Asci were unitunicate, cylindrical, nonamyloid, $82.7{\sim}124.8\;(Ave.103.3){\times}4.1{\sim}5.1\;(Ave.4.9){\mu}m$ in size, 16 part-spored. Ascospores were bullet-shaped or somewhat oblong, hyaline, bicellular, roughened or warted, $5.4{\sim}7.4\;(Ave.6.5){\times}3.6{\sim}5.5\;(Ave.4.7){\mu}m$ in size. This fungus readily form the stroma on PDA. Mycelia on PDA nearly invisible and without cottony aerial mycelium. Optimum temperature for mycelial growth of this fungus was $25^{\circ}C$ on PDA and its growth rate was 15 mm per day. This species did not grow at below 10 and above $35^{\circ}C$. Phialides in culture enlarged in the middle and aggregated to penicillate type. They were very variable, shorted ampulliform and occasionally curved when matured, but cylinderical when young, measuring $11.9{\sim}24.3\;(Ave.\;14.7){\times}2.9{\sim}3.9\;(Ave.\;3.4){\mu}m$ when matured and $7.2{\sim}14.0\;(Ave.\;10.8){\times}2.8{\sim}4.9\;(Ave.\;3.5){\mu}m$ when young. Phialosopres were ovoid to ellipsoid, smooth, measuring $3.5{\sim}7.2\;(Ave.\;4.5){\times}2.6{\sim}3.3\;(Ave.\;2.9){\mu}m$. Nineteen isolates of Hypocrea sp. were analyzed on the basis of molecular characteristics and classified into phenotypic groups. On the basis of RAPD, URP-PCR, the fungus was confirm to monoclonal, and was classified as a different taxon from reported species of Hypocrea and Trichoderma and supposed to be a new species not previously reported in literature.

• The Korean Nurse
• /
• v.32 no.5
• /
• pp.66-77
• /
• 1994

The purpose of this study was to develop a new nursing unit which can meet changing health care needs, enhance patients' satisfaction and nurses' job satisfaction, and finally guarantee quality nursing care with present manpower. For this, one medical unit was selected as a unit for quality care. And one medical unit which is similar in staffing and patients' characteristics was selected as a control unit. To assess present problems and identify the remedies to the problems a hospital-wide survey and a workshop were performed. According to the survey results, educational programs and improvement of the facilities and equipment supply system, managereal support for interdepartmental cooperation and intensification of bed-side nursing care were adopted as main principles for operating model unit, This model unit was operated for 3 months from Sep. 1, 1992 to Nov. 30, 1992. To evaluate the effectiveness of the model unit, derect/indirect nursing care hours, patients' satisfaction to nursing care, nurses' job satisfaction, and quality care index were measured. Direct/indirect nursing care hours were compared with that of the control unit, and patients' and nurses' satisfaction and quality care index were measured before and after operating model unit and compared with each other. The results of the study were as follows; 1. In the model unit mean direct nursing care hours per cach shift was 146.88 minutes and indirect nursing care hours was 354.72 minutes. The ratio of the direct nursing care hour to indirect nursing hour was 29.6 ; 70.4 and that of the control unit was 26.9 : 73.1. Direct nursing care hour in model unit was longer than that of the control unit. But, the difference was not significant. In subcategories of direct nursing care, the time spent in mobility and exercise, conservation of body temperature, hygiene, and communication and health education were longer than that of the con" trol unit. 2. Indirect nursing care hour in model unit was shorter than that of the control unit. But, the difference was not significant. In subcategories of indirect nursing care, the time spent in drug management and ward arrangement was shorter than that of the control unit. 3. Patients' satisfaction to nursing care was increased significantly after operating the model unit (T=-3.48, P=-0.002) and satisfaction to subcategories of physical comfort measure, psychological cate, and unit management components were significantly higher than before. 4. In the model unit, nurses' total job satisfaction was increased significantly after operating the model unit(Z=2.1004, P=.0357) and satisfaction to subcategory of satisfaction to administration was significantly higher than before (Z=-2.0732, P=.0382). 5. After operating the model unit, quality care index was increased from 89 to 93. With this results, it can be summarized that all the measures tried for quality care, such as educational programs, managereal support for interdepartmental cooperation, and improvement of the equipment and facility provision resulted in partial increase in direct nursing care hours, nurses satisfaction to their job and patients' satisfaction to nursing care. In can be postulated that managereal support and motivation without proper staff supplementation is not enough for increasing direct nursing care hours. And for the enhancement of the level in clinical nursing, and staff supplement must be considered sincerely and the measures for reducing indirect nursing care hours, such as computerization of nursing care activities, improvement of facilities and equipment and facilities supply system, must be instituted in addition.

• Clean Technology
• /
• v.22 no.1
• /
• pp.53-61
• /
• 2016

Steam reforming of tar produced from biomass gasification was conducted using several Ni-based catalysts. In labscale, the catalytic steam reforming of toluene which is a major component of biomass tar was studied. A fixed bed reactor was used at various temperatures of 400-800 ℃. Ru (0.6 wt%) and Mn or K (1 wt%) were applied as a promoter in Ni based catalysts. Generally, Ni/Ru-K/Al₂O₃ catalyst shows higher performance on steam reforming of toluene than Ni/Ru-Mn/Al₂O₃ catalyst. Used catalysts were analyzed by XRD and TGA to detect sintering and carbon deposition. Base on the lab-scale studies, the monolith and pellet type catalysts were tested in 1 ton/day scale biomass gasification system. Ni/Ru-K/Al₂O₃ monolith catalyst shows high tar reforming performance at high temperature. In addition, Ni/Ru-Mn/Al₂O₃ monolith catalyst was showed deactivation with operation time. Reforming performance of Ni/Ru-K/Al₂O₃ pellet catalyst which showed 66.7% tar conversion at 587 ℃ was compared to regenerated one. Overall, Ni/Ru-K/Al₂O₃ pellet catalyst shows higher stability and performance than other used catalysts.