• 한국지형학회지
• /
• 제25권2호
• /
• pp.15-29
• /
• 2018

The sediment transport process in a river reflects the process of geomorphological change in the watershed, influencesthe river bed variation and the river channel migration, and is a parametric phenomenon that exhibits a dynamic self-adjusting process. Sediment load is divided into bedload and suspended load depending on the dominant mechanism. Quantitative sediment load is important information for solving river problems. Because it is difficult and time consuming to measure bedload, compared to that ofsuspended load, data on the sediment transport load and the research required for the gravel-bed rivers are insufficient. This study is to analyze the ratio of the bedload to the total sediment load in gravel-bed rivers. The sediment load ratio in gravel-bed rivers increases with the flow rate per unit width, and the rate of the bedload varies more rapidly than the suspended load. The sediment transport efficiency coefficient has been affected by the ratio of the flow depth to the mean diameter of particles and has been dependent on the shear velocity Reynolds number. So $A^{\ast}$ and $B^{\ast}$ are introduced to compensate for the uncertainties such as bed materials, sediment transport, and flow velocity distribution, and the coefficient of bedload ratio has been presented. For the sediment load data in experimental channels and rivers, A* was 3.1. The dominant variables of $B^{\ast}$ were $u_*d_m/{\nu}$ in the gravel-bed and h/dm in the sand-bed. When $B^{\ast}$ the is the same, in the experimental channels the coefficient of bedload ratio was affected by the bed forms, but in the rivers it was of little difference between the gravel-bed and sand-bed.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2010년도 학술발표회
• /
• pp.1739-1744
• /
• 2010

하천에서 유사이송 및 하상변동을 예측하는 여러 방법들 중 수치모형을 이용하는 방법이 현재 가장 많이 이용되고 있으며 특히 단일 유사량 산정 공식과 유사이송 형태를 현장자료와의 검증과정 없이 대부분 그대로 적용하고 있는 실정이다. 수치모형을 이용한 특정 대상하천의 정확한 하상변동 예측을 위해서는 유사량 산정 공식 및 유사 이송 형태에 따른 하상변동 민감도 분석 및 모형 검증과 검정 작업이 반드시 필요하며 이러한 과정을 통해 대상하천에 대한 최적의 유사량 산정 공식과 유사 이송 형태를 선정해야 할 것이다. 본 연구는 실제하천을 대상으로 여러 유사량 산정 공식과 유사 이송 형태를 다르게 적용이 가능한 CCHE2D 모형을 이용하여 하상변동 수치모의를 수행하였다. 유량 크기별 모의조건을 적용하여 하상변동 민감도를 분석을 통해 대상하천에서 적합한 유사량 공식과 이송 형태를 선정하고 실제수문사상의 유량 및 수위 조건을 적용하여 모의를 수행한 결과와 대상 하천에서 측량한 단면과 비교하여 검정을 실시하였다.

• 한국환경과학회지
• /
• 제19권10호
• /
• pp.1219-1227
• /
• 2010

In this study, the sensitivity analysis of bed changes due to the various sediment transport equations have been conducted for 80 km reach of the Lower Nakdong River using the HEC-6 which is one dimensional numerical model. The bed elevation changes according to the different sediment transport formulas were compared and analyzed quantitatively. As a result of the numerical simulation, the final bed elevation calculated by Engelund and Hansen(1967), Ackers and White(1973), and Yang(1979) formulas was similar to one another in configuration. The bed change simulated by Engelund and Hansen(1967) were greatest among them, for example, 5.5 m deposition and 2.9 m erosion for 100 years. Also, in the case of Toffaleti (1969) equation, the maximum bed deposition of 8.04 m after 100 years was induced at the 73 km location upstream of the Nakdong River Estuary Barrage. Meyer-Peter-M$\ddot{u}$ller(1948) and Wilcock(2001) formulas produced the deposition only at the upstream end and there was little bed change in the downstream area. The unreal bed configuration of continuously up and down pattern was simulated by Laursen(1958) transport equation.

• Water Engineering Research
• /
• 제6권1호
• /
• pp.17-30
• /
• 2005

The bed evolution of the stretch of the River Rhine between km-812.5 and km-821.5 is characterised by general bed degradation as a result of the river training works and dredging activities of the last two centuries. The degradation of the river bed affects the water levels, and so the navigation conditions. To combat the erosion of the river bed with the aim to keep up the shipping traffic and to avoid the ecological system damages due to water level reductions, sand-gravel-mixtures were added to the river (so called artificial grain feeding activities). This paper presents the results of an application of a graded sediment transport model in order to study morpholodynamical characteristics due to artificial grain feeding activities in the river stretch. The finite element code TELEMAC2D was used for flow calculation by solving the 2D shallow water equation on non-structured grids. The sediment transport module SISYPHE has been developed for graded sediment transport using a multiple layer model. The needs to apply such graded sediment transport approaches to study morphological processes in the domain are discussed. The calculations have been carried out for the case of middle water flow and different size-fraction distributions. The results show that the grain feeding process could be well simulated by the model.

• Water Engineering Research
• /
• 제4권2호
• /
• pp.99-109
• /
• 2003

Since bed elevation changes are mainly dependent on the flow velocity and corresponding shear stress, it is possible to predict bed elevation numerically using velocity components. For the scour analysis due to channel contraction, a bed load transport model is developed and applied to estimate scour depth around coffer dam in the Mississippi River. During Phase I of the Lock & Dam No. 26 replacement project, a coffer dam was constructed to reduce the flow area approximately by 50%. Flow velocity increases due to the flow area reduction yields significant lowering (erosion) of the channel bed elevation. The proposed numerical model solves the sediment continuity equation using the finite element method to evaluate scour process in the vicinity of the coffer dam

• 대한토목학회논문집
• /
• 제26권3B호
• /
• pp.311-319
• /
• 2006

저면경계층에서 부유사와 소류사 flux를 포함하는 실제적인 표사이동에 기초한 지형변화모델(SED-FLUX)이 개발되었다. SED-FLUX는 파랑모듈, 동수역학 모듈 및 부유사농도, 순부상 flux($Q_s$)와 소류사 flux를 계산하는 표사수송 및 확산모듈을 포함하며, 소류사 flux는 파-흐름 공존장에서 검증된 van Rijn의 TRANSPOR 프로그램에 의해 평가되어진다. 저면에서 순부상 flux $Q_s$는 표사확산모듈에서 source/sink 항으로서 평가되어지며, 수심변화모듈은 수심변화량을 계산하고 시간에 따른 bed level의 변화를 계산한다. 모델의 검증을 위하여 소류사이동의 이동한계수심은 방사성 동위원소 추적자를 사용한 현장 실험자료와 파와 흐름에 의한 표사이동한계수심에 대한 몇몇 경험식과 비교되었다. 본 모델을 파에 의한 해빈 단면변화에 적용한 결과 입사파의 특성에 따른 명확한 침식과 퇴적분포를 나타내었다. 끝으로, 이안제 배후에서 파와 해빈류에 의한 수심변화를 계산한 결과 이안제의 배후에서 초기 tombolo의 형성을 보여주었다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2018년도 학술발표회
• /
• pp.149-149
• /
• 2018

Prediction on initial motion of sediment is crucial to evaluate sediment transport and channel stability. The condition of incipient movement of sediment is characterized by bed shear stress, which is generated from force of moving water against the bed of the channel, and by critical shear stress, which depends on force resisting motion of sediment due to the submerged weight of the grains. When the bed shear stress exceeds the critical shear stress, sediment particles begin rolling and sliding at isolated and random locations. In Mountain River, debris flow frequently occurs due to heavy rainfall and can lead some natural stones from mountain slope into the bed river. This phenomenon could add additional forces to sediment transport system in the bed of river and also affect or change direction and magnitude of sediment movement. In this paper, evaluations on incipient motion of uniform coarse gravel under falling spheres impacts using small scale flume channel were conducted. The drag force of falling spheres due to water flow and length movement of falling spheres were investigated. The experiments were carried out in flume channel made by glass wall and steel floor with 12 m long, 0.6 m wide, and 0.6 m deep. The bed slopes were selected with the range from 0.7% to 1.5%. The thickness of granular layer was at least 3 times of diameter of granular particle to meet grain placement condition. The sphere diameters were chosen to be 4cm, 6 cm, 8 cm, 10 cm. The spheres were fallen in to the bed channel for critical condition and under critical condition of motion particle. Based on the experimental results, the Shields curve of particles Reynold number and dimensionless critical shear stress were plotted. The relationship between with drag force and the length movement of spheres were plotted. The pathways of the bed material Under the impact of spheres falling were analyzed.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2011년도 학술발표회
• /
• pp.17-17
• /
• 2011

As a method of countermeasure to bed degradation and armoring phenomena of bed material in the downstream area of dam reservoirs, sediment augmentation (replenished sediment) has been carried out in many Japanese rivers. In general, bed of the replenished sediment site is composed of rocks, because the site is located in the downstream area of the dams and sediment supply is very small. Bed deformation process has been researched by many researchers. As a method of countermeasure to bed degradation and armoring phenomena of bed material in the downstream area of dam reservoirs, sediment augmentation (replenished sediment) has been carried out in many Japanese rivers. In general, bed of the replenished sediment site is composed of rocks, because the site is located in the downstream area of the dams and sediment supply is very small. Bed deformation process has been researched by many researchers. However, most of them can treat movable bed only and cannot be applied to the bed deformation process of sediment on rocks. If the friction angle between the sediment and the bed surface is assumed to be the same as the friction angle between the sediment and the sediment, sediment transport rate must be smaller without sediment deposition layer on the rocks. As a result, the reproduced bed geometry is affected very well. In this study, non-equilibrium transport process of non-cohesive sediment on rigid bed is introduced into the horizontal two dimensional bed deformation model and the model is applied to the erosion process of replenished sediment on rock in the Nakagawa, Japan. Here, the Japanese largest scale sediment augmentation has been performed in the Nakagawa. The results show that the amounts of the eroded sediment and the remained sediment reproduced by the developed numerical model are $56300m^3$ and $26800m^3$, respectively. On the other hand, the amounts of the eroded sediment and the remained sediment measured in the field after the floods are $56600m^3$ and $26500m^3$, respectively. The difference between the model and field data is very small. Furthermore, the bed geometry of the replenished sediment after the floods reproduced by the developed model has a good agreement with the measured bed geometry after the floods. These results indicate that the developed model is able to simulate the erosion process of replenished sediment on rocks very well. Furthermore, the erosion speed of the replenished sediment during the decreasing process of the water discharge is faster than that during the increasing process of the water discharge. The replenished sediment is eroded well, when the top of the replenished sediment is covered by the water. In general, water surface level is kept to be high during the decreasing process of the discharge during floods, because water surface level at the downstream end is high. Hence, it is considered that the high water surface level during the decreasing process of the water discharge affects on the fast erosion of the replenished sediment.

• 한국수자원학회논문집
• /
• 제43권6호
• /
• pp.543-557
• /
• 2010

본 논문에서는 2차원 하상변동 수치모형인 CCHE2D 모형을이용하여 유사량 공식과 유사이송형태별 이류-확산 방정식의 선택이 하상변동 수치모의결과 값에 미치는 영향을 분석하고 실제 현장자료와 비교하였다. 또한 이러한 분석을 기초로 낙동강하구둑 상류 접근수로에서의 최적의 유사량 공식과 유사 이송형태별 이류-확산 방정식을 제안하였다. 낙동강하구둑 상류 접근수로에 대해 Ackers and White와 Engelund and Hansen의 유사량 공식과 소류사와 부유사 유사 이송형태에 따른 이류-확산 방정식을 각각 다르게 적용하여 모의한 결과, Engelund and Hansen 공식을 적용한 경우에는 Ackers and White 공식을 적용한 경우와 비교했을 때, 평수 및 홍수 조건에서 모두 하상변동량이 거의 없는 것으로 나타났다. 또한 Ackers and White 공식으로 2002년에 발생한 실제 수문사상을 적용하여 하상변동 모의한 결과, 소류사 이송형태의 이류-확산 방정식을 적용한 모의결과가 부유사 이송형태를 적용했을 경우 보다 실제 하상변동에 더 근접한 것으로 나타났다.

• Smart Structures and Systems
• /
• 제26권6호
• /
• pp.781-796
• /
• 2020

Prediction of total sediment load is essential in an extensive range of problems such as the design of the dead volume of dams, design of stable channels, sediment transport in the rivers, calculation of bridge piers degradation, prediction of sand and gravel mining effects on river-bed equilibrium, determination of the environmental impacts and dredging necessities. This paper is aimed to investigate and predict the total sediment load of the Wadi Arbaat in Eastern Sudan. The study was estimated the sediment load by separate total sediment load into bedload and Suspended Load (SL), independently. Although the sediment records are not sufficient to construct the discharge-sediment yield relationship and Sediment Rating Curve (SRC), the total sediment loads were predicted based on the discharge and Suspended Sediment Concentration (SSC). The turbidity data NTU in water quality has been used for prediction of the SSC in the estimation of suspended Sediment Yield (SY) transport of Wadi Arbaat. The sediment curves can be used for the estimation of the suspended SYs from the watershed area. The amount of information available for Khor Arbaat case study on sediment is poor data. However, the total sediment load is essential for the optimal control of the sediment transport on Khor Arbaat sediment and the protection of the dams on the upper gate area. The results show that the proposed model is found to be considered adequate to predict the total sediment load.