• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.9
• /
• pp.3168-3175
• /
• 2010

Lumber support as the part of automotive seat supports the pressure applied on waist by clearing the tiredness of passenger at long driving. In this study, lumbar support of automotive seat is modelled. Various bids are built up at its bed. The main purpose is to look for adequate model on comfortableness by calculating displacement according to applied force when some passenger sit at automotive seat. Full build -up type of 5 rows can be seen most suitable for passenger's comfortableness and its durability as the inner displacement of 5mm and contact force of 500 N.

• Journal of Korean Biological Nursing Science
• /
• v.16 no.3
• /
• pp.182-191
• /
• 2014

Purpose: The aim of this study was to identify necessary emergency treatment and nursing activities for severe trauma patients according to elapsed time and vital signs. Methods: A survey was conducted with 121 patients over 15 points ISS on EMR from June 1, 2011 to May 31, 2012. Collected data were analyzed with descriptive statistics, applying McNemar's test using SPSS 12.0. Results: Almost all of the subjects were men and the mean age was 46.9. Run-time for primary diagnosis, treatment decision, and leaving for the hospital room was 0.19, 4.36, and 4.21 hours, respectively, and stayover time was 9 hours. Regardless of vital signs, emergency treatments involving ambu-bagging, intubation, ventilator, and central vein catheterization insertion were offered within an hour. Central venous pressure, Foley catheter/Levin tube preparation and maintenance were performed in cases of unstable vital sign patients within an hour. Unrelated to vital signs, nursing activities for consciousness assessment, skin assesment and wound care, bed sore/fall down assesment and care, intravenous injection insertion and maintenance were conducted for all severe trauma patients within an hour. Foley catheter/Levin tube drainage care was performed for patients who had unstable vital signs within an hour. Conclusion: Emergency treatment and nursing activities for severe trauma patients were specific according to elapsed time and vital signs.

• Journal of Environmental Science International
• /
• v.25 no.7
• /
• pp.999-1005
• /
• 2016

The H water treatment plant has been operating since 1982 and has had no renovation. It is assumed that the filters have been operated for more than 30 years and therefore are deteriorated. Many of the filters show an unequal state of air scouring during backwashing. For this study one filter, which was presumed most deteriorated among eighteen filters, was selected as a model filter for renovation. Some of the effects seen after renovation of the underdrain system were a lower average filtrated turbidity by approximately 0.02 NTU and an equal backwash state throughout the filter bed. Sand wash efficiencies by backwash before renovation of the underdrain system were 28%, 8%, and 5% at the surface, 50 cm depth, and 100 cm depth, respectively, and after renovation of the underdrain system were 94%, 26%, and 15%, respectively. The standard deviation of the effective sand size was 0.025-0.033 mm before renovation of the underdrain system and 0.002-0.011 mm after renovation of the underdrain system, meanings there was equal backwash pressure throughout the filter. Filtration time after renovation was approximately 2 times longer than before renovation.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.11
• /
• pp.2067-2076
• /
• 2000

The experiments have been made to develop manganese-based sorbent(MT, MFT) for the removal of hydrogen sulfide from simulated hot coal gases. Manganese-based sorbents were tested in an ambient-pressure fixed-bed reactor to calculate H2S removal efficiency. and a three hole jet attrition tester to characterize the sorbent physical properties. According to the experimental results of attrition test. the attrition resistance of 5% bentonite containing sorbent was higher than that of 2% bentonite. The attrition resistances of both sorbents increased with induration temperature. Effects of sulfidation temperature. space velocity. and $H_2S$ concentrations on the $H_2S$ removal efficiency were investigated. Experimental results showed that $H_2S$ could be removed from 5,100ppmv to 20ppmv at $450^{\circ}C$, and to 30~65ppmv at $550{\sim}650^{\circ}C$ for both MT/MFT sorbents. As for the change of space velocity, the breakthrough time was decreased with space velocity.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.2
• /
• pp.414-419
• /
• 2010

This paper describes the design and performance of a hovering AUV 'NOAH' constructed at Jeju National University. We analyse the dynamic performance of NOAH using simulation program and carry out depth control test at small basin. The main purpose of NOAH is to carry out fundamental tests on its attitude control and position control. Its configuration is similar to general ROV appearance for underwater works and dimension is $0.75m{\times}0.5m{\times}0.5m$. It has 4 thrusters of 450watt for longitudinal/lateral/vertical propulsion and is equipped with a pressure sensor for measuring water depth and a magnetic compass for measuring heading angle. The navigation of the vehicle is controlled by an on-board Pentium III-class computer, which runs with the help of the Windows XP operating system. These give us an ideal environment for developing various algorithm which are needed for developing and advanced hovering AUV.

• Korean Chemical Engineering Research
• /
• v.53 no.6
• /
• pp.682-689
• /
• 2015

A two-step process was investigated for pretreatment and fractionation of rice straw. The two-step fractionation process involves first, soaking rice straw in aqueous ammonia (SAA) in a batch reactor to recover lignin-rich hydrolysate. This is followed by a second-step treatment in a fixed-bed flow-through column reactor to recover xylo-oligomer-rich hydrolysate. The remaining glucan-rich solid cake is then subjected to an enzymatic process. In the first variant, SAA treatment in the first step dissolves lignin at moderate temperature (60 and $80^{\circ}C$), while in the second step, hot-water treatment is used for xylan removal at higher temperatures ($150{\sim}210^{\circ}C$). Under optimal conditions ($190^{\circ}C$ reaction temperature, 30 min reaction time, 5.0 ml/min flow rate, and 2.3 MPa reaction pressure), the SAA-hot-water fractionation removed 79.2% of the lignin and 63.4% of the xylan. In the second variant, SAA was followed by treatment with dilute sulfuric acid. With this process, optimal treatment conditions for effective fractionation of xylo-oligomer were found to be $80^{\circ}C$, 12 h reaction time, solid-to-liquid ratio of 1:12 in the first step; and 5.0 ml $H_2SO_4/min$, $170^{\circ}C$, and 2.3 MPa in the second step. After this two-step fractionation process, 85.4% lignin removal and 78.9% xylan removal (26.8% xylan recovery) were achieved. Use of the optimized second variant of the two-step fractionation process (SAA and $H_2SO_4$) resulted in enhanced enzymatic digestibility of the treated solid (99% glucan digestibility) with 15 FPU (filter paper unit) of CTec2 (cellulase)/g-glucan of enzyme loading, which was higher than 92% in the two-step fractionation process (SAA and hot-water).

• Korean Chemical Engineering Research
• /
• v.43 no.5
• /
• pp.560-565
• /
• 2005

Catalytic performances of zeolite catalysts such as H-mordenite(HM), H-Beta$(H{\beta})$, H-USY(HUSY) for the transmethylation between 1-methylnaphthalene(1-MN) and 2-methylnaphthalene(2-MN) were investigated in a fixed-bed flow reactor. $H{\beta}$ showed higher and more stable conversion than others to exhibit a high and stable 2-MN/1-MN ratio of 2.3 and 2,6-DMN/2,7-DMN ratio of 1.3 at the $1^{st}$ hour of time on stream under the reaction conditions as follows: reaction temperature of $350^{\circ}C$, reaction pressure of 1.5 MPa, WHSV of $2.7g_{feed}/g_{cat}{\cdot}h$ and the molar ratio of 1-MN and 2-MN of 1:1. The catalytic behavior has been discussed in relation with the catalyst pore structure and acidity.

• Clean Technology
• /
• v.7 no.2
• /
• pp.127-132
• /
• 2001

The effects of activated-carbon (AC) packing length on the Pressure Swing Adsorption (PSA) performance was investigated for the hydrogen separation from the multicomponent mixture gas. Linear driving force model was used to describe mass transfer between two phase and coupled Langmuir isotherm was used for each component as a nonlinear adsorption isotherm. When two adsorbents with a different adsorption capacity were packed consecutively in one bed, it is very important to determine the packing ratio of zeolite to activated carbon affecting the purity and recovery of the product. The activated carbon packing length in adsorption tower of 120 cm was determinated by the ending point of $CO_2$ contration. The optimum length of an activated carbon layer was 65 cm for production of high-purity hydrogen.

• Archives of Pharmacal Research
• /
• v.29 no.3
• /
• pp.241-248
• /
• 2006

Angiotensin converting enzyme (ACE) inhibitors have cardioprotective effects in different species including human. This cardioprotective effect is mainly due to the inhibition of bradykinin (BK) degradation rather than inhibition of the conversion of angiotensin I to angiotensir. II. Bradykinin, a nonapeptide, has been considered to be the potential target for various enzymes including ACE, neutral endopeptidase 24.11, carboxypeptidase M, carboxypeptidase N, proline aminopeptidase, endopeptidase 24.15, and meprin. In the present study, the coronary vascular beds of Sprague Dawley rat isolated hearts were perfused (single passage) with Krebs solution alone or with different concentrations of BK i.e. $2.75{\times}10^{-10},\;10^{-7},\;10^{-6}\;and\;10^{-5}M$ solution. Percent degradation of BK was determined by radioimmunoassay. The degradation products of BK after passing through the isolated rat-hearts were determined using RP-HPLC and mass spectroscopy. All the four doses of BK significantly decreased the perfusion pressure during their passage through the hearts. The percentage degradation of all four doses was decreased as the concentration of drug was increased, implying saturation of a fixed number of active sites involved in BK degradation. Bradykinin during a single passage through the hearts degraded to give [1-7]-BK as the major metabolite, and [1-8]-BK as a minor metabolite, detected on HPLC. Mass spectroscopy not only confirmed the presence of these two metabolites but also detected traces of [1-5]-BK and arginine. These findings showed that primarily ACE is the major cardiac enzyme involved in the degradation of bradykinin during a single passage through the coronary vascular of bed the healthy rat heart, while carboxypeptidase M may have a minor role.

• Journal of Internet Computing and Services
• /
• v.11 no.2
• /
• pp.41-48
• /
• 2010

It is essential to guarantee a smooth communication and data exchange in a PHD(Personal Healthcare Device) network for applications providing U-health services. In spite of that, most of PHDs are heterogeneous, so the heterogeneity of their protocols makes it difficult to develop an integrated gateway sending sensed healthcare data to U-health service providers. To solve this problem, we suggest the design and implementation of a device adapter model based on dynamic managed module in this paper. Our model were implemented to work on the OSGi-based gateway middleware and to have interoperability in connection with the HL7 system that is the standard of the Healthcare Information systems. In addition, our model has an architecture supporting a communication based on the object serialization in order to provide extensibility in the functional aspect of applications. Through the experiment on a test-bed which is an implementation of the device adapter module for electrocardiogram and blood-pressure/blood-sugar device having one channel, we have confirmed the accuracy of sensing and sending data.