• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 춘계학술대회 논문집
• /
• pp.408-414
• /
• 2014

After drilling operations at the offshore plant to production to crude oil to high pressure. After that time the low pressured of pipe inside when the secondary produce so oil recovery is reduced. At that time injection sea water at the pipe inside through water injection pump that the device Increase recovery so to be research and development at many industry. So developing 3-stage water injection pump at the domestic company. A variety of mathematical analysis during the detailed design analysis was not made through the dynamics characteristic. In this paper, a 2D finite element analysis is performed through the dynamics of the present study was the validation of the model.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.609-615
• /
• 2001

A turbo-fan is easily exposed to noise and vibration as against other industrial machines and the majority of them is subject to be damaged by vibration. The most usual problem of vibration in a turbo-fan is resonance so the case of being composed of iron sheet structure with low strength like a turbo-fan should be taken seriously. In this paper, FFT(Fast Fourier Transform) and Order tracking method were used to analyze factors of vibration in a turbo-fan and hereby with proper selection of vibration isolator, we wanted to reduce vibration of base. After Order tracking, we knew resonance occurred in rotational frequency 23 Hz(1400 rpm) at the casing and the bearing. After the test of base vibration using vibration isolators, the spring isolator was more effective than the robber isolator in the base vibration and the vibration isolating is more effective in the case that the isolating pad is adhered to the bottom of the isolating spring.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.1188-1195
• /
• 2007

The vertical forces in rail fasteners at areas of bridge transitions near the embankment and on the pier will occur due to different deformations of adjoining bridges caused by the trainloads, the settlement of supports, and the temperature gradients. The up-lifting forces is not large problem in the blast track because the elasticity of blast and rail pad buffs up-lifting effect. But, it is likely to be difficult to ensure the serviceability of the railway and the safety of the fastener in the end in that concrete slab track consist of rail, fastener, and track in a single body, delivering directly the up-lifting force to the fastener if the deck is bended because of various load cases, such as the end rotation of the overhang due to the vertical load, the bending of pier due to acceleration/braking force and temperature deviation, the settlement of embankment and pier, the temperature deviation of up-down deck and front-back pier, and the rail deformation due to wheel loads. The analysis of the rail fastener is made to verify the superposed tension forces in the rail fastener due to various load cases, temperature gradients and settlement of supports. The potential critical fasteners with the highest uplift forces are the fastener adjacent to the civil joint. The main influence factors are the geometry of the bridge such as, the beneath length of overhang, relative position of bridge bearing and fastener, deflection of bridge and the vertical spring stiffness of the fastener.

• 한국유체기계학회 논문집
• /
• 제12권6호
• /
• pp.41-46
• /
• 2009

This paper deals with the operating-speed (high-speed) balancing of a refinery gasoline HDS (hydrodesulfurization) process recycle-gas 8-stages compressor rotor. A low-speed balancing condition of the rotor was measured as maintaining the G2.5 level. But an inspection run of operating-speed balancing condition, using tilting-pad journal bearings of actual use, showed that while it could be continuously-operated safely at a rated speed of 10,500 rpm, the rotor would not be able to run over 11,000 rpm as the vibration increased very sharply, approaching 11,000 rpm. In order to cure that a series of operating-speed balancing, which first calculated balance correction-weights by applying the influence coefficient measured and calculated at 10,500 rpm and then implemented correction works, was carried-out. The final operating-speed balancing results showed that the vibrations at the bearing pedestals represented very good levels of 0.2 mm/s by decreasing to as much as the 1/10 of the original vibrations and particularly, even at a targeted maximum continuous operating speed, MCS, of 11,500 rpm the vibrations represented about 1 mm/s, which is the operating-speed balancing vibration specification of API. Therefore, the expansion of MCS was successfully accomplished through the operating-speed balancing.

• 동력기계공학회지
• /
• 제18권6호
• /
• pp.34-39
• /
• 2014

In this study, the structural analysis and the modal analysis are conducted to investigate the stress level, the deformation characteristics and the natural modes of the casing of a planetary gear reducer for a 800kW grade pulverizer mill. The casing is subjected to the load, 2800 kN, from the lump coals in the pulverizing process. Because of the symmetry, the half portion of the reducer casing is modeled for the stress analysis. But the full model is used to find out the eigenvalues and natural modes for the modal analysis. The contact conditions are applied between the thrust pad bearing and the adjacent contacting parts. The results shows that the casing structure has the sufficient strength and stiffness to support the load under consideration. ANSYS version 15 is employed to perform the numerical study.

• 한국지진공학회논문집
• /
• 제23권1호
• /
• pp.1-8
• /
• 2019

In this study, the effectiveness of a multi-action hybrid damper (MHD) composed of lead rubber bearing (LRB) and friction pad was verified in terms of seismic performance improvement of a frame structure. The LRB and the friction elements are connected in series, so the LRB governs the intial small deformation and the friction determines large deformation behavior. Cyclic loading tests were conducted by using a half scale steel frame structure with the MHD, and the results indicated that the structure became to have the stable trilinear hysteresis with large initial stiffness and first yielding due to the LRB, and the second yielding due to the friction. The MHD could significantly increase the energy dissipation capacity of the structure and the hysteresis curves obtained by tests were almost identical to the analytically estimated ones.

• Earthquakes and Structures
• /
• 제24권6호
• /
• pp.415-428
• /
• 2023

Low-cost techniques with seismic isolation performance and excellent resilience need to be explored in the case of rural low-rise buildings because of the limited buying power of rural residents. As an inexpensive and eco-friendly isolation bearing, scrap tire pads (STPs) have the issue of poor resilience. Thus, a seismic isolation system under a column (SISC) integrated with STP needs to be designed for the seismic protection of low-rise rural buildings. The SISC, which is based on a simple exterior design, maintains excellent seismic performance, while the mechanical behavior of the internal STP provides elastic resilience. The horizontal behaviors of the SISC are studied through load tests, and its mechanical properties and the intrinsic mechanism of the reset ability are discussed. Results indicate that the average residual displacement ratio was 24.59%, and the reset capability was enhanced. Comparative experimental and finite element analysis results also show that the load-displacement relationship of the SISC was essentially consistent. The dynamic characteristics of isolated and fixed-base buildings were compared by numerical assessment of the response control effects, and the SISC was found to have great seismic isolation performance. SISC can be used as a low-cost base isolation device for rural buildings in developing countries.

• 한국식품영양과학회지
• /
• 제21권2호
• /
• pp.154-162
• /
• 1992

수산물 폐기물을 이용하기 위하여 대롱 새우껍질에서 추출하여 만든 키토산을 마우스에 이식한 sarcoma 180을 이용하여 in vivo와 in vitro에서 항암 효과 및 면역기능에 미치는 영향에 대하여 실험하였다. 키토산의 sarcoma-180에 대한 고형암 성장 저지율을 40mg/kg투여시 63.84%의 저지율을 나타내었다. 수명 연장효과는 대조군에 비하여 키토산을 40mg/kg 투여하였을 때 26.84%로 그다지 높지 않았다. In vivo에서의 항암효과를 근거로 하여 in vitro에서는 sarco-ma-180에 대한 직접적인 세포의 독성 작용은 거의 없었다. 키토산은 30mg/kg과 40mg/kg을 투여시 혈중 백혈구수와 총복강세포수가 대조군에 비하여 다소 증가 하였고 장기인 간, 비장 및 흉선의 무게도 투여한 용량에 따라 증가하는 용량 의존성 반응을 보였다. 항체 유도염증 반응인 항체매개형 과민반응과 지연형 과민반응은 족척의 두께가 키토산에 의해 거의 정상 수준까지 회복되었다. Macrophage의 식작용에 미치는 영향은 phagocytic index 와 corrected phagocytic index에서 거의 차이가 없었고, 용혈성 반응 세포수(plaque forming cell, PFC)는 대조군에 비하여 PFC/$10^{7}$ spleen의 경우 18.88%와 31.83%로 다소 증가하였다.

• 한국강구조학회 논문집
• /
• 제17권3호통권76호
• /
• pp.295-306
• /
• 2005

본 연구에서는 '철도교용 고무패드의 강성추정기법'에서 결정된 각 고무패드의 강성과 가정된 감쇠비를 이용하여 두 판형교에서의 동적 거동을 분석하였다. 또한 패드에 의한 판형교의 동적 거동 변화가 철도교량의 거동의 한계를 규정하고 있는 규준에 적합한지도 판단하였다. 고무패드를 교좌로 판형교에 설치하면 판형교의 동적 처짐은 증가하였다. 그러나 처짐이 증가하더라도 규정에 있는 한계를 넘지는 않아 차량의 안정적 주행에 영향을 주지는 않는다. 천연고무나 크로로프렌 고무패드는 변형이 크게 발생하여 교좌로서 활용이 부적합하나, 폴리우레탄 고무패드는 변형이 작게 나타나 사용성이 우수한 것으로 판단되었다. 그러나 고속 주행을 위해서는 패드의 면적을 증가 시켜서 패드변형을 제한해야 하는 것으로 나타났다. 고무패드의 강성증가 및 감쇠비 증가가 교량의 동적 거동에 미치는 영향에 대해서 분석을 실시하였다. 고무패드의 감쇠비 증가는 교량의 동적 거동에 거의 영향을 주지 않았다. 패드의 강성 증가는 상대적으로 자중이 크고 강성이 작은 교량에서는 응답 개선 효과가 적지만, 자중이 작고 강성이 큰 즉 경간이 짧은 교량에서 상대적으로 응답 개선 효과가 크게 나타났다.

• 한국소음진동공학회논문집
• /
• 제24권6호
• /
• pp.462-469
• /
• 2014

After drilling operations at the offshore plant, crude oil is producted under high pressure. After that time, oil recovery is reduced, because the pressure of the pipe inside is low during the secondary produce. At that time injection sea water at the pipe inside through water injection pump that the device increase to recovery. A variety of mathematical analysis during the detailed design analysis was not made through the dynamics characteristic at the domestic company. 2D model has reliability of analysis results for the uncomplicated model. Also element and the node the number of significantly less than in the 3D model. So, the temporal part is very effective. In addition, depending on the quality of mesh 3D is a real model and FEM model occurs error. So, user needs a lot of skill. In this paper, a 2D finite element analysis was performed through the dynamics analysis and the study model was validated.