• Journal of Radiopharmaceuticals and Molecular Probes
• /
• v.7 no.2
• /
• pp.105-111
• /
• 2021

⁸⁹Zr is a positron-emitting radioisotope, which has known as well-suited radioisotope for use in a monoclonal antibody-based imaging agent for immuno-PET. The purpose of this study was to quantitatively evaluate the diagnostic ability of general trastuzumab and thio-trastuzumab as HER2 positive receptors based on Df hexadentate iron chelator. Desferrioxamine-p-SCN (Df-Bz-NCS) and desferroixamine-maleimide (Df-Mal) were purchased from Macrocyclics (Dallas, TX, USA). The trastuzumab was purchased from Roche (Schweiz), and thio-trastuzumab was obtained from professor Hyo-Jeong Hong group (Kangwon National University). The radioisotope ⁸⁹Zr was produced by domestic purification system and KIRAMS using medical cyclotron (50 MeV, Scantronix). The conjugates of Df-trastuzumab and Df-thio-trastuzumab were prepared with Df-Bz-NCS and Df-Mal under basic aqueous solution (pH 8-9) at room temperature, respectively. The conjugates purified by PD-10 column were mixed with dried ⁸⁹Zr chloride. ⁸⁹Zr-labeled conjugates were purified and concentrated by Amicon ultra centrifugal filter. The preparation step and time of ⁸⁹Zr-labeled conjugates was shorted as 4 steps within 2 hours. ⁸⁹Zr-labeled conjugates showed the highly radiochemical purity of over 98%, and were very stable until 7 days by the analysis of radio-ITLC method. Each radio-labeled conjugates were also exhibited the highly stability in both PBS buffer and mouse serum. Immuno-PET imaging of ⁸⁹Zr-labeled conjugates in mice bearing gastric cancer xenograft tumors with HER2 expression showed high tumor uptake in the NCI-N87 HER2-expressing. However, ⁸⁹Zr-Df-Mal-thio-trastuzumab showed a relatively lower tumor-to-background ratio than ⁸⁹Zr-Df-Bz-trastuzumab, as well as whole-body distribution. In the results, ⁸⁹Zr-Df-Bz-trastuzumab was evaluated to have a relatively higher HER2 diagnostic ability than ⁸⁹Zr-Df-Mal-thio-trastuzumab.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.5
• /
• pp.462-469
• /
• 2023

In this study, we propose a method for evaluating the risk of collision between ships to support determination on the risk of collision in a situation in which ships encounter each other and to prevent collision accidents. Because several uncertainties are involved in the navigation of a ship, must be considered when evaluating the risk of collision. We apply the Dempster-Shafer theory to manage this uncertainty and evaluate the collision risk of each target vessel in real time. The distance at the closest point approach (DCPA), time to the closest point approach (TCPA), distance from another vessel, relative bearing, and velocity ratio are used as evaluation factors for ship collision risk. The basic probability assignments (BPAs) calculated by membership functions for each evaluation factor are fused through the combination rule of the Dempster-Shafer theory. As a result of the experiment using automatic identification system (AIS) data collected in situations where ships actually encounter each other, the suitability of evaluation was verified. By evaluating the risk of collision in real time in encounter situations between ships, collision accidents caused by human errora can be prevented. This is expected to be used for vessel traffic service systems and collision avoidance systems for autonomous ships.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.11 no.3
• /
• pp.184-191
• /
• 2023

With increasing corrosion in RC (Reinforced Concrete) structures, cracks occurred due to corrosion products and bearing load resistance decreased. In this study, corrosion was induced through an accelerated corrosion test (ICM: Impressed Current Method) with 140 hours of duration, and changes in USV (Ultra-Sonic Velocity), flexural failure load, and corrosion weight were evaluated before and after corrosion test. Three levels of cover depth (20 mm, 30 mm, and 40 mm) were considered, and the initial cracking period increased and the rust around steel decreased with increasing cover depth. In addition, the USV linearly decreased with decreasing cover depth and increasing amount of corrosion. In the flexural loading test, the bending capacity decreased by more than 10% due to corrosion, but a clear correlation could not be obtained since the corrosion ratio was small, so that the effect of slip was greater than that of reduced cross-sectional area of steel due to corrosion. As cover depth increased, the produced corrosion amount and USV changed with a clear linear relationship, and the cracking period due to corrosion could be estimated by the gradient of the measured corrosion current.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.6
• /
• pp.102-110
• /
• 2023

PSC-I girder bridges constitute the largest proportion among highway bridges in Korea. According to the precision safety diagnosis data for the past 10 years, approximately 41.3% of the PSC-I bridges have been graded as C. Furthermore, with the increase in the aging of bridges, preemptive management is becoming more important. Damage and deterioration to the deck and girder with a long replacement cylce can have considerable impacts on the service and deterioration of a bridge. In addition, the high rate of device damages, including expansion joints and bearings, necessitates an investigation into the influence of the device damage in the structural members of the bridge. Therefore, this study defined representative PSC-I girder bridges with single and multiple spans to evaluate heterogeneous damages that incorporate the damage of the bridge member and device with the deterioration of the deck. The heterogeneous damages increased a crack area ratio compared to the individual single damage. For the single-span bridge, the occurrence of bearing damage leads to the spread of crack distribution in the girder, and in the case of multi-span bridges, expansion joint damage leads to the spread of crack distribution in the deck. The research underscores that bridge devices, when damaged, can cause subsequent secondary damage due to improper repair and replacement, which emphasizes the need for continuous observation and responsive action to the damages of the main devices.

• Journal of Korea Foundry Society
• /
• v.44 no.1
• /
• pp.9-15
• /
• 2024

In this study, in order to improve the lifespan of parts made of manganese steel, manganese steel was cast by varying the amount of Ti added to the steel. In order to confirm the characteristics of the cast material, processing characteristics including tensile and surface characteristics and bearing ratio were investigated. It was confirmed that when the amount of Ti added to high manganese steel exceeds 0.5%, the strength of the alloy is improved due to grain refinement, and fine carbides are formed inside the steel. This results in increased resistance to surface wear compared to the alloy with only Mn added. There was no significant difference in the increase in tensile strength as the Ti content in manganese steel was increased. However, inclusion of Ti showed a small but greater effect on wear resistance compared to Mn, and the size and the distribution of carbides become coarse depending on the Ti content. and was evenly distributed. It was confirmed that the strength and surface properties of manganese steel can be improved by the addition of Ti to improve the lifespan of parts made with this steel. It was found that Ti is effective in developing materials with excellent wear resistance due to refinement of dendrite crystal grains. In the samples where Ti was added, the carbide appears to increase the resistance to surface roughness, and due to the nature of Mn steel, surface hardening begins to occur, which appears to extend the life.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.1
• /
• pp.69-78
• /
• 2008

Shearing strength test in tension type was investigated to determine the shear resistance of bolt and drift-pin connection of domestic larix glulam. The specimen was connected with bolt and drift-pin in the inserted plate type, and only bolt in the side plate type. The diameter of bolt and drift-pin used in the experiment are 12, 16 and 20 mm. The hole of bolt was drilled at the end-distance 5 d and 7 d. Tension load was loaded in the direction parallel to grain. The shear resistance was evaluated according to end-distance through this, the yield load was compared with the experimental yield load, using Larsen's formula. The prototype design strength is based on the yield load of end-distance 7 d and the reduction factor of end-distance 5 d was calculated. The results were as follows. 1. The average of maximum load of drift-pin connection was higher by 3~30% at the inserted type than at bolt connection with increasing diameter. In bolt connection, the average of maximum load of the side type was 1.54~2.07 times higher than that of the inserted type. In the same diameter, the average of maximum load of end-distance 7 d was higher by 8~44% than that of 5 d. 2. The bearing stress was 1.16~1.41 times higher at the inserted connection than at drift-pin connection, and 1.37~1.86 times higher at 7 d than at 5 d. Also, when the slenderness ratio was below 7.5 at drift-pin connection and below 6.0 at inserted connection, the lateral capacity was good. 3. The ratio of the experimental yield load and the predicted yield load calculated by Larsen's formula proposed by Larsen was 0.80~1.10 at inserted connection, and 0.75~1.46 at side connection. 4. When the inserted bolt connection was based on the yield load of end-distance 7 d, the reduction factor was 0.89 at 12 mm connection, 0.93 at 16 mm and 0.85 at 20 mm. The reduction factor was 0.89 at 12 mm the inserted drift-pin connection, 0.93 at 16 mm, 0.93 at 20 mm. The reduction factor was 0.79 at the side connection of the 12 mm bolt connection and 0.80 at 16 mm.

• The Journal of the Korean Society for Microbiology
• /
• v.22 no.1
• /
• pp.79-93
• /
• 1987

The result of various researches mainly in search of 194 Shigella strains, isolated by the Health Research Centers(situated in Seoul city, Inchon city, Pusan city, Kyonggi-Do, Kangwon-Do, Chungchongnam and Buk-Do, Kyongsangnam and Buk-Do, Jollanam and Buk-Do, and Jaeju-Do) in addition to those clinical laboratories of all the general hospitals situated down twon Seoul, conducted during the month of Jan. through Dec. 85, through the reisolating-activity program following its transportation into the laboratory, particularly for a complete check on its correctiveness, are as follows: 1. Isolation processes were performed with the 194 strains obtained from each placeduring the period of investigation: 164 Strains(84.5%) of Sh. flexneri, B group; 6 Strains(3.1%) of Sh. boydii, C group; 24 Strains(12.3%) of Sh. sonnei, D group, which means there's quite a lot in B group while Sh. dysenteriae, A group was not isolated at all. 2. The isolation rate of the 164, B group for subserotype was 1b, 84(51.2%) the highest one, 2(1.2%) on 3a the lowest one, 4, on C group; In D group subserotype II showed 14(58.4%) more than subserotype I. 3. The biological data on sexuality regarding the isolation-strain showed traditional particularity. But the subserotype 1b in B group 2(2.4%) showed gas-growth from glucose. In subserotype 1a, the indole-growth was 88.9% on masculine which was considerably a good one. In the test of arginine dihydrolase subserotype I among D group showed 100% masculine rate. The subserotype 6 among B group showed 92.5% masculine. In the dissolution test of manitol, all subserotypes showed 100% maculine except subserotype 1b. In the dissolutioning test of rhamnose, the subserotype I among D group showed 100% masculine which is the unusual one. 4. Interms of the area among 13 districts examined, Kangwon-Do had 41(21.1%) which is the highest one on its ratio. 5. In terms of season on the strain isolation category, 44(22.7%) is the number isolated in April which is the highest one. 6. In terms of ages, the strain isolation ratio was notably high above the ages of 60 which was 34(17.5%). Next one was 29(14.9%) which was under the ages of 4. 7. In terms of sex, female was 113 or 58.2% while male was 74 or 38.2%, which means the female had more than the male. 8. The result of the resisting capability on the usage of 12 antibiotic medication was; 100% on chloramphenicol; 94.3% on tetracycline, 82.0% on streptomycin, 76.3% on carbenicillin, 74.7% on ampicillin, in regular order. The strain source bearing multimedication resisivity against the 5 antibiotic medication is as many as 117 or 60.3%. Of which 43.3% of 1b sub serotype, B group was the best one, and thus the resistivity against the antistrain medication seems the tendency is being changed. The summing up of the above result shows the total specific strains isolated in each branch in Korea is 194, of which the main type is Sh. flexneri 84.5%. The isolating rate is almost evenly spreading, although the Kangwon-Do showed the highest rate on the above data. It also shows female is higher than male on its statistics. The tendency on age category showed both on old and infancy generations high. However, the resistant capability against antibacteria medication or vaccine was still remaining on habitual one, particularly tending towards multimedication or vaccine trend.

• Microbiology and Biotechnology Letters
• /
• v.30 no.3
• /
• pp.270-281
• /
• 2002

The growth of Enterobacteria, Lactobacillus acidophilus and L. plantarum was promoted by natural products themselves bearing antioxidative capacity and combined two, three and four kinds of them.1. acidophilus was promoted by Paeonia japonica, Acori graminei rhizoma, Aurantii nobilis pericarpium, alone, and two mixed combinations were composed of Acori graminei rhizoma and Cinnamomi cortex, Aurantii nobilis pericarpium and Puerariae radix, and three mixed combinations were formed with Cimicifugae rhi- zoma, Cinnamomi cortex and Glycyrrhizae radix, and four mixed combinations were made up Glycyrrhizae radix, Theae folium, Scutellaria baicalensis george and Cinnamomi cortex. There four combination promoted growth of 1. acidophilus with 1.3 times than that of control, and their antioxidative capacity also higher than that off times, the ratio of elimination of hydroxyl radical was more than 70% in dilution rate of 100 times. In the case of 1. plantarum was premoted by Corm fructus, Nelumbo nuclfera gaertner Sophorae flos, alone, and two mixed combinations were organized with Schizandrae Iructus and Theae folium, Paeonia japonica and Epimedii herba, and three mixed combinations were combined with Corni fructus and Theae folium and Paeonia japonica, Corni fructus and Coptidis rhizoma and Schieandrae fructus, and four mixed combinations were composed of Corm fructus, Theae folium, Coptidis rhizoma, Scutellaria baicalensis george, and Corm fructus, Schizandrae fructus, Paeonia japonica, Theae folium. These four combinations assisted growth of 1. plantarum with 1.5 times than that of control, and their antioxidative capacity also higher than that of 4-5 times, the ratio of elimination of hydroxyl radical was more than 75% in dilution rate of 100 times. As these combinations of natural products could activate some parts of body, they might be applied pharmaceuitcal sources, functional foods, and expected to fermentative beverages.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.10 no.1
• /
• pp.115-123
• /
• 1990

The purpose of this study was to examine the uses of coal ash as a type of construction material. The methods of examination were chemical anlysis, soil laboratory test and the soil vibration test. Materials used were coal ash obtained as a by-product from 5 thermal power plants in Yongdong, Yongwol, Sochon(anthracite coal) and in Samchonpo and Honam (bituminous coal). Over 70% of the coal ash consisted of silica and alumina. The fly ash grain size showed a uniform distribution from fine-sand to silt, and that of the bottom ash showed from sand to gravel. The specific gravity and density of the coal ash were low. The long term strength increased gradually due to the self-setting property resulting from pozzolanic activity. The shear strength was higher than that of general soil. Cohesion and optimum moisture content of anthracite coal ash were higher than bituminous coal ash, whereas the maximum dry density was higher in bituminous coal ash. The coal ash dynamic Young's modulous curve range was similar to that of general soil. Of the results from the soil vibration test by car-running, the size relative acceleration level in the ash pond was higher than that of natural ground, but the damping ratio was lower than that of natural ground near the ash pond. The coal ash has more advantageous engineering properties than general soil with particles of the same size. For example, the California Bearing Ratio of the bottom ash at both Yongdong and Yongwol was 77~137%. Therefore we expect that if further study is done, coal ash can be used as a construction material when reclaiming seashore, construction embankments, road construction, making right-weight aggregate, or as a general construction material.

• Economic and Environmental Geology
• /
• v.8 no.3
• /
• pp.147-164
• /
• 1975

19 amphibolite samples from the Precambrian Sobaegsan metamorphic belt including the Ogbang mine amphibolites were analyzed for 24 elements each, by wet chemical and emission spectroscopic methods. All the chemical data were evaluated by the methods outlined by Evans and Leake(1960) and Leake(1964) and by Shaw and Kudo(1965). The chemical similarity of all the studied rocks analyzed to basic igneous rocks is consistently indicated particularly by trace element abundance and variation trends. Petrography and oxidation ratios were also considered in attempting to determine the nature of the parent rocks. 3 analyses of W-bearing mafic metamorphic rocks from Sangdong area of the Ogcheon geosynclinal zone are also presented and discussed. Geochemical data for these latter rocks have been possibly derived from mafic tuffs deposited in an area of carbonate deposition.