• Journal of the Korean Society of Food Science and Nutrition
• /
• v.22 no.4
• /
• pp.405-411
• /
• 1993

Several studies have shown that phytol isolated from perilla leaf and small water dropwort (Oenanthe javanica (BL) D.C., wild type) extract reveal antirumor activities. In the present study we investigated the effect of phytol and the small water dropwort extract on the T subset in the sarcoma 180-transplanted mice in order to elucidate the immunological mechanism of antiturmor activity of these substances. The results obtained from the experiment were as follows : When phytol was injected into the sarcoma-180 transplanted mice (control), the levels of T cell and T subset by inoculation of the tumor cells were enhanced, but that of T cells in case of small water dropwort extract was similar to the control. Asialo GM1$^{＋}$ cells were increased when phytol or small water dropwort extract with injected into tumor-transplanted mice. In normal mice the number of asialo GM1$^{＋}$ cells increased with phytol injection and decreased with small water dropwort extract injection. L3T4$^{＋}$/Lyt-2$^{＋}$cell ratios were decreased when phytol was injected into tumor-transplanted mire, but increased in case of small water dropwort extract injection. In normal mice the ratios showed large decreases with phytol or small water dropwort extract injection. These results indicate that phytol or small water dropwort extract ran activate the proliferation of natural killer cells that are effector cells in tumor-bearing mice.

• Journal of the Korean Society of Costume
• /
• v.18
• /
• pp.225-245
• /
• 1992

The button is a part of costume. But it has the symbolism of costume in itself and reflects the sociocultural phenomena. The purpose of this study is to clarify symbolism of button of eighteenth and nineteenth century which had been most popular. This study is based on the library research. Through this paper, I reached conclusions as follows. The symbolism of button is found in various ways. First, Aesthetics is found in material, color, design and type etc. of button. Especially Indian silver button of abstract type shows well distinctive aesthetics of Indians. Second, The material and the number of button vary with one's status and show off one's privilege. I England, there was the rule, in which the symbol of the King was a silver button with a figure of lion. The livery button represents his family to the nble and shows the meaning of obedience to the servant. Third, The button on uniform varies with ranks. This is prominent in a uniform of a soldier or a policeman. Fourth Material and craft of button show one's economic position. The button gives a Very good picture of what one's life was then. Precious button with gold, silver, and other jewels is an index to one's property. Fifth, The button of political event is used for election, which shows the face and the name of runner. Besides that, there were buttons designed for the flag or the slogan for political event. Sixth, The button of social event reflects a social phase of life in war or revolution, for example, it satirizes the burning of the Bastille in the French Revolution, or the taxpayer bearing the burden. Seventh, the buttons that symbolize a historic event are made to commemorante an epochal and critical occurrence or an important person's birth, death, visit to some place, etc., Eighth, there were well-known persons, for example, a president, a king, a queen, a singer, or an artist in the buton of personality. Nineth, The button of one's company shows one's community in figures or pictures, that is, this button is used as a symbol one's community. Tenth, The button varies with the development of science and technology. It gives a very good picture of what it was and what the technological level was. Eleventh, The buttons that symmbolize on occupation most impressively are uniform buttons. Symbolic marks related with a particular occupation are carved on the buttons of compary employees' uniforms. Twelfth, Various natural phenomena are designed to appear on buttons, Some express themselves simply as they are, and others appear as a symbolic form such as environmental relationship between men and nature, four seasons, a constellation and all other natural things occurring during a year. Finally, The button of rebus is a motto expressed by a combination with objects figures, letters, words, or phrases.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.7
• /
• pp.854-867
• /
• 2014

In the circumstance that high oil price state is continued over the world, the investment in crude oil development by oil major is a trend of increasing. Recently the number of delivered drill-ship for 5 years has been sharply increased all over the world and about twice than that of past 30 years. As addition to the increase of the drill-ship demand, the operation of drill-ships which is delivered recently is about 3,000 meters, ultra deep sea, on average and the work area is expending. Accordingly the drilling system including the size and length of pipe for drilling has been bigger and bigger and the power supply equipment for operation system also has large capacity. Unlike merchant vessel, high power and high voltage of diesel generators are required for drill-ship for which the demand for V-type 320 bore of diesel generator has increased. It is on the raised that the importance of lubrication oil cleaning for diesel generator on drill-ship which has longer time for construction, and also long term low load operation is unavoidable during commissioning of equipments. Recently it was reported that engine crankpin was damaged due to the hard contact caused by the abnormal wear down(Cam wear) on crankpin and bearing. The same pattern of wear down was found through the inspection on series vessels and the other vessel under commissioning. The purpose of this paper is to analyze of the wear mechanism based on the observation and theories and objective research from actual cases and to prepare the counter measures to avoid foreseeable damage when the lubricating oil is not properly cleaned.

• Journal of Plant Biotechnology
• /
• v.37 no.3
• /
• pp.305-312
• /
• 2010

During a last decade, the introduced traits in commercialized GM crops have been diversified from a simple trait such as herbicide resistance gene or insectresistance gene which are related to the crop production into more complicated traits such as modification of fatty acid or essential amino acid composition, modified coloring pattern of flower. In addition, it was investigated that several other GM crops bearing more refined traits expected to lead next generation are also awaiting for risk assessment (RA) or under field test for the preparation of RA in the near future. These GM crops include abiotic stress resistance including drought or cold, increased biomass, production of bioethanol or diesel, production of pharmaceuticals or functional materials for industrial. In particular, in 2008 and 2009, it was reported that the highest number of GM crops for molecular farming are under developed in laboratory or green house level in all the world. Likewise, in Korea, 171 events from 49 plant species are under developed to introduce several important traits. At present, about 10 events are under field test to select elite lines for RA application. For the first time, herbicide resistance turfgrass developed by Korean research team has been submitted for RA and currently under requested for additional data. Moreover, GM rice resistant to leaf roll (folder) disease is expected as a next event to be submitted for RA application.

• Rapid Communication in Photoscience
• /
• v.1 no.1
• /
• pp.1-9
• /
• 2012

Luminescent lanthanide complexes have been overviewed for advanced photonics applications. Lanthanide(III) ions ($Ln^{3+}$) were encapsulated by the luminescent ligands such as metalloporphyrins, naphthalenes, anthracene, push-pull diketone derivatives and boron dipyrromethene(bodipy). The energy levels of the luminescent ligands were tailored to maintain the effective energy transfer process from luminescent ligands to $Ln^{3+}$ ions for getting a higher optical amplification gain. Also, key parameters for emission enhancement and efficient energy transfer pathways for the sensitization of $Ln^{3+}$ ions by luminescent ligands were investigated. Furthermore, to enhance the optophysical properties of novel luminescent $Ln^{3+}$ complexes, aryl ether-functionalized dendrons as photon antennas have been incorporated into luminescent $Ln^{3+}$ complexes, yielding novel $Ln^{3+}$-cored dendrimer complex such as metalloporphyrins, naphthalenes, and anthracenes bearing the Fr$\acute{e}$chet aryl-ether dendrons, namely, ($Er^{3+}-[Gn-Pt-Por]_3$ (terpy), $Er^{3+}-[Gn-Naph]_3$(terpy) and $Er^{3+}-[Gn-An]_3$(terpy)). These complexs showed much stronger near-IR emission bands at 1530 nm, originated from the 4f-4f electronic transition of the first excited state ($^4I_{13/2}$) to the ground state ($^4I_{15/2}$) of the partially filled 4f shell. A significant decrease in the fluorescence of metalloporphyrins, naphthalenes and anthracene ligand were accompanied by a strong increase in the near IR emission of the $Ln^{3+}$ ions. The near IR emission intensities of $Ln^{3+}$ ions in the lanthanide(III)-encapsulated dendrimer complexes were dramatically enhanced with increasing the generation number (n) of dendrons, due to the site-isolation and the light-harvesting(LH) effects. Furthermore, it was first attempted to distinguish between the site-isolation and the light-harvesting effects in the present complexes. In this review, synthesis and photophysical studies of inert and stable luminescent $Ln^{3+}$ complexes will be dealt for the advanced photonics applications. Also, the review will include the exploratory investigation of the key parameters for emission enhancement and the effective energy transfer pathways from luminescent ligands to $Ln^{3+}$ ions with $Ln^{3+}$-chelated prototype complexes.

• Journal of the Korean association of regional geographers
• /
• v.18 no.4
• /
• pp.473-493
• /
• 2012

Malaria infection is sensitively influenced by regional meteorological conditions along with global climate change. Remote sensing techniques have become an important tool for extraction of climatic and environmental factors, including rainfall, temperature, surface water, soil moisture, and land use, which are directly linked to the habitat qualities of malaria mosquitoes. Improvement of sensor fidelity with higher spatial and spectral resolution, new multinational sensor development, and decreased data cost have nurtured diverse remote sensing applications in malaria research. In 1984, eradication of endemic malaria was declared in Korea, but reemergence of malaria was reported in mid-1990s. Considering constant changes in malaria cases since 2000, the epidemiological management of the disease needs careful monitoring. Geographically, northmost counties neighboring North Korea have been ranked high in the number of malaria cases. High infection rates in these areas drew special attention and led to a hypothesis that malaria dispersion in these border counties might be caused by north-origin, malaria-bearing adult mosquitoes. Habitat conditions of malaria mosquitoes are important parameters for prediction of the vector abundance. However, it should be realized that malaria infection and transmission is a complex mechanism, where non-environmental factors, including human behavior, demographic structure, landscape structure, and spatial relationships between human residence and the vector habitats, are also significant considerations in the framework of medical geography.

• Journal of Biosystems Engineering
• /
• v.37 no.3
• /
• pp.155-165
• /
• 2012

This study was performed to offer the data for design of the seedling bed transfer equipment to make the automation of working process in a plant factory. The seedling bed transfer equipment pushing the seedling bed with bearing wheels on the rail for interconnecting each working process by a pneumatic cylinder was made and examined. The examined transfer force to push the seedling bed with a weight of 178.9 N by the pneumatic cylinder with length of 60 cm and section area of 5 $cm^2$ was measured by experiments. The examined transfer forces was compared with theoretical ones calculated by the theoretical formula derived from dynamic system analysis according to the number of the seedling bed and pushing speed of the pneumatic cylinder head at no load. The transfer function of the equipment with the input variable as the pushing speed $V_{h0}$(m/s) and the output variable as the transfer force f(t)(N) was represented as $F(s)=(V_{h0}/k)(s+B/M)/(s(s^2+Bs/M+1/(kM))$ where M(kg), k(m/N) and B(Ns/m) are the mass of the bed, the compression coefficient of the pneumatic cylinder and the dynamic friction coefficient between the seedling bed and the rail, respectively. The examined transfer force curves and the theoretical ones were represented similar wave forms as to use the theoretical formular to design the device for the seedling bed transfer. The condition of no vibration of the transfer force curve was $kB^2>4M$. The condition of transferring the bed by the repeatable impact and vibration force according to difference of transfer distance of the pneumatic cylinder head from that of the bed was as $Ce^{-\frac{3{\pi}D}{2\omega}}<-1$, where ${\omega}=\sqrt{\frac{1}{kM}-\frac{B^2}{4M^2}}$, $C=\{\frac{\frac{B}{2M}-\frac{1}{kB}}{\omega}\}$, $D=\frac{B}{2M}$. The examined mean peak transfer force represented 4 times of the stead state transfer force. Therefore it seemed that the transfer force of the pneumatic cylinder required for design of the push device was 4Bv where v is the pushing speed.

• The Korean Journal of Malacology
• /
• v.32 no.2
• /
• pp.133-139
• /
• 2016

The incubation time required for hatching of O. ocellatus were investigated through the processes of egg and embryonic developments by the dissecting microscopic and visual observations. And differences in ecological characteristics of the plankton mode of life or the benthic mode of life according to total numbers of the suckers on each short arm of the hatched juvenile larvae of O. ocellatus were studied by comparisons with other octopodidae species. Compared with the recent a few results reported by other researchers associated with the incubation time required for hatching by female adult mother of O. minor (73-90 days after spawning at $20.9-21.5^{\circ}C$ ranges), in this study, the incubation time required for hatching by female adult mother of O. ocellatus was 56-57 days after spawning at $11.0-20.4^{\circ}C$. Therefore, the incubation time required for hatching by female adult mother varied with Octopodidae species. In this studies, each ovarian egg laid by a female was connected to an egg string attaching to the surface of the wall or bottom of vacunt shell of Rapana venosa. Egg and embryonic developments of this species were studied in the indoor aquaria, in the specific gravity ranging 1.024-1.025. the hatched juvenile of O. ocellatus is 10.3 mm in the mean total length and 4.5 mm in mantle length, and each of its short arms has 18-20 suckers. The just hatched juvenile larvae of O. ocellatus enter the benthic mode of life (benthic larval stage) after hatching. In particular, regarding differences in ecological characteristics of the mode of life according to total numbers of the suckers, O. vulgaris may not need to have many suckers because they enter the planktonic mode of life after hatching, however O. ocellatus may need to have many suckers, because they should adapt to the benthic mode of life. And also the just hatched juvenile larvae of O. minor (bearing many suckers more than O. ocellatus) enter the benthic mode of life (benthic larval stage) after hatching. Therefore, the total number of the suckers on each short arm of the hatched juvenile larvae can be used for determining whether an octopus species has planktonic larval stages or benthic larval stage (benthic mode of life). In particular, The intracohort cannibalism phenomena appeared at the hatched juvenile larval stage because the larval stage of O. ocellatus and O. minor enter into the benthic larval stage in the early stage, unlike entering into the plaktonic larval stage in other Octopus species such as O. vulgaris: at this time, the early hatched larvae fed the late hatched larvae (they are the same species and almost same ages). Therefore, the intracohort cannibalism pheneomena occur in the just hatched juvenile stage of only O. ocellatus and O. minor.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.22 no.1
• /
• pp.135-144
• /
• 2020

Since the depth of tunneling with tunnel boring machine (TBM) becomes deeper and deeper, the expense for site investigation for coring and geophysical survey increases to obtain the sufficient accuracy. The tunnel ahead prediction methods have been introduced to overcome this limitation in the stage of site investigation. Probe drilling can obtain the core and borehole images from a borehole. However, the space in TBM for the probe drilling equipment is restricted and the core from probe drilling cannot reflect the whole tunnel face. Seismic methods such as tunnel seismic prediction (TSP) can forecast over 100 m ahead from the tunnel face though the signal is usually generated using the explosive which can affect the stability of segments and backfill grout. Electromagnetic methods such as tunnel electrical resistivity prospecting system (TEPS) offer the exact prediction for a conductive zone such as water-bearing zone. However, the number of electrodes installed for exploration is limited in small diameter TBM and finally the reduction of prediction ranges. In this study, the theoretical equations for the electrical resistivity survey whose electrodes are installed in the face and side of TBM to minimize the installed electrodes on face. The experimental tests were conducted to verify the derived equations.

• The Journal of the Korea Contents Association
• /
• v.16 no.11
• /
• pp.369-383
• /
• 2016

This study aims for strengthening the ability of home visiting care giver by figuring out interpersonal stress of bearing hardships which affect turnover intentions of home visiting care givers and by focusing on mediating effect of burnout. First, in summary, the analysis result was that the age of care givers and the presence of spouse are in relational factors correlated with burnout. Also age and experience of turnover have some connection with turnover intentions. Second, interpersonal stress of burnout and turnover intentions have static correlation. Third, the interpersonal stress represents increasing level of stress of burnout and the intervention of burnout shows static effects on turnover intentions of care givers. Suggestions of this study's results are, first, solution of interpersonal stress which home visiting care givers are facing should be improved by families' support or encouragement. In addition, the more professional and organized job training should be advanced to improve the understanding of various situations and coping skills. Second, the more interest should be need on business characteristics and environmental limitation. Also many centers that support care givers should reinforce their role. Third, to decrease the turnover intention which comes from interpersonal stress, doing some burnout research could be helpful and especially the legal regime which supports the research of burnout is essential.