• Progress in Medical Physics
• /
• v.24 no.3
• /
• pp.183-190
• /
• 2013

Recently, the photoacoustic imaging system has been widely and intensively developed, and has been shown the possibility of diagnosis for early stage cancer. In this study, we developed a photoacoustic tomography imaging system with a commercial ultra sound device and a linear array probe. A tube phantom and a chicken breast phantom was made for the possibility of a system as a breast cancer detection. A moving average filter and a band pass filter with 3~6 MHz bandwidth were developed for background noise elimination before delay-and-sum beamforming algorithm was used for image reconstruction. As a result, we showed that some signal processing procedure before beamforming was effective for the photoacoustic image reconstruction.

• Journal of Communications and Networks
• /
• v.18 no.6
• /
• pp.892-901
• /
• 2016

In the multi-user multiple-input multiple-output (MIMO) system, orthogonal random beamforming (ORBF) scheme is proposed to serve multiple users simultaneously in order to achieve the multi-user diversity gain. The opportunistic space-division multiple access system (OSDMA-S) scheme performs multiple weighting matrices during the training phase and chooses the best weighting matrix to be used to broadcast data during the transmitting phase. The OSDMA-S scheme works better than the original ORBF by decreasing the inter-user interference during the transmitting phase. To save more time in the training phase, a partly random multiple weighting matrices selection scheme is proposed in this paper. In our proposed scheme, the Base Station does not need to use several unitary matrices to broadcast pilot symbol. Actually, only one broadcasting operation is needed. Each subscriber generates several virtual equivalent channels with a set of pre-saved unitary matrices and the channel status information gained from the broadcasting operation. The signal-to-interference and noise ratio (SINR) of each beam in each virtual equivalent channel is calculated and fed back to the base station for the weighting matrix selection and multi-user scheduling. According to the theoretical analysis, the proposed scheme relatively expands the transmitting phase and reduces the interactive complexity between the Base Station and subscribers. The asymptotic analysis and the simulation results show that the proposed scheme improves the throughput performance of the multi-user MIMO system.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.15 no.6
• /
• pp.812-819
• /
• 2012

Interference and jamming are becoming increasing concern to a radar system nowdays. AESA(Active Electronically Steered Array) antennas and adaptive beamforming(ABF), in which antenna beam patterns can be modified to reject the interference, offer a potential solution to overcome the problems encountered. In this paper, we've developed a planar active phased array radar system, in which ABF, target detection and tracking algorithm operate in real-time. For the high output power and the low noise figure of the antenna, we've designed the S-band TRMs based on GaN HEMT. For real-time processing, we've used wavelenth division multiplexing technique on fiber optic communication which enables rapid data communication between the antenna and the signal processor. Also, we've implemented the HW and SW architecture of Real-time Signal Processor(RSP) for adaptive beamforming that uses SMI(Sample Matrix Inversion) technique based on MVDR(Minimum Variance Distortionless Response). The performance of this radar system has been verified by near-field and far-field tests.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.1
• /
• pp.43-52
• /
• 2010

In this paper, the mobile-WiMAX (m-WiMAX) using the Smart antenna technique is implemented. Experiments are performed to compare Smart antenna system with conventional single antenna system. To implement the m-WiMAX smart antenna system there are many considerations, key issues of which are symbol time acquisition, beamforming, calibration. In the paper, symbol time acquisition, beamforming, calibration are implemented in WiMAX Smart antenna system and we verified that Smart antenna system is superior to single antenna system. The experimental results show 5.5 dB performance enhancement of implemented Smart antenna system in throughput compared with a single antenna system. The experimental result is almost same as theoretical result of 6 dB.

• Journal of Broadcast Engineering
• /
• v.15 no.1
• /
• pp.122-132
• /
• 2010

AT-DMB system has been developed to increase data rate up to double of conventional T-DMB in the same bandwidth while maintaining backward compatibility. The AT-DMB system adopted hierarchical modulation which adds BPSK or QPSK signal as enhancement layer to existing DQPSK signal. The enhancement layer signal should be small enough to maintain backward compatibility and to minimize the coverage loss of conventional T-DMB service coverage. But this causes the enhancement layer signal of AT-DMB susceptible to fading effect in transmission channel. A turbo code which has improved error correction capability than convolutional code, is applied to the enhancement layer signal of the AT-DMB system for compensating channel distortion. However there is a need for other solutions for better reception of AT-DMB signal in receiver side without increasing transmitting power. In this paper, we propose adaptive array antenna system with Eigen-space beamforming algorithm which benefits beamforming gain along with diversity gain. We analyzed the reception performances of AT-DMB system in indoor and mobile environments when this new smart antenna system and algorithm is introduced. The computer simulation results are presented along with analysis comments.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.784-788
• /
• 2008

In this research, we propose a remote speech input unit, a new method of user-friendly speech input in speech recognition system. We focused the user friendliness on hands-free and microphone independence in speech recognition applications. Our module adopts two algorithms, the automatic speech detection and speech enhancement based on the microphone array-based beamforming method. In the performance evaluation of speech detection, within-200msec accuracy with respect to the manually detected positions is about 97percent under the noise environments of 25dB of the SNR. The microphone array-based speech enhancement using the delay-and-sum beamforming algorithm shows about 6dB of maximum SNR gain over a single microphone and more than 12% of error reduction rate in speech recognition.

• Proceedings of the KIEE Conference
• /
• 2005.07d
• /
• pp.2998-3000
• /
• 2005

The orthogonal frequency-division multiplexing (OFDM) technique is well known to be robust against the frequency-selective fading in wireless channels. It is due to the exploitation of a guard interval that is inserted at beginning of each OFDM symbol. Based or the conventional OFDM and a polyphase filtered orthogonal frequency division multiplexing (PF-OFDM) technique, we developed an adaptive beamforming algorithm for antenna arrays. The proposed algorithm would lead to an efficient use of channel, since it is possible to eliminate a guard interval and also easily suppress interchannel interference at the same time. In this paper, a series of computer simulations have been provided to show the performance of the proposed system.

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.109-110
• /
• 2007

The sum-rate capacity of multi-antenna broadcast channels recently has attracted much research interests. However, those effort mainly has focused on a single-cell system. In this paper, we consider a multi-cell system where a transmitter uses zero-forcing beamforming with multiple antennas. We select a linear zero-forcing weight that maximizes the sum-rate when intercell interference exists. With numerical investigation, we will show the sum-rate gain achieved by the proposed method gets larger when the number of interfering cells increases.

• Journal of Positioning, Navigation, and Timing
• /
• v.11 no.2
• /
• pp.91-98
• /
• 2022

In the next generation wireless communication system, the beamforming technique based on a massive antenna is one of core technologies for transmitting and receiving huge amounts of data, efficiently and accurately. For highly performed and highly reliable beamforming, it is required to accurately estimate the Angle of Arrival (AOA) for the desired signal incident to an antenna. Employing the massive antenna with a large number of elements, although the accuracy of the AOA estimation is enhanced, its computational complexity is dramatically increased so much that real-time communication is difficult. In order to improve this problem, AOA estimation algorithms based on the massive antenna with the low computational complexity have been actively studied. In this paper, we compute and analyze the computational complexity of the cascade AOA estimation algorithm based on the Flexible Massive Concentric Circular Array (FMCCA). In addition, its computational complexity is compared to conventional AOA estimation techniques such as the Multiple Signal Classification (MUSIC) algorithm with the high resolution and the Only Beamspace MUSIC (OBM) algorithm.

• ETRI Journal
• /
• v.38 no.6
• /
• pp.1052-1063
• /
• 2016

We propose a millimeter wave (MMW)-based mobile hotspot network (MHN) system for application in high-speed railways that is capable of supporting a peak backhaul link throughput of 1 Gbps per train at 400 km/h. The MHN system can be implemented in subways and high-speed trains to support passengers with smart devices and provide access to the Internet. The proposed system can overcome the inherent high path loss in MMW through system designs and high antenna gains. We present a simulation of the system performance that shows that a fixed beamforming strategy can provide high signal-to-interference-plus-noise-ratio similar to those of an adaptive beamforming strategy, with the exception of 15% of the train path in which the network can use link adaptation with low-order modulation formats or trigger a handover to maintain the connection. We also demonstrate the feasibility of the MHN system using a test bed deployed in Seoul subway line 8. The backhaul link throughput varies instantaneously between 200 Mbps and 500 Mbps depending on the SNR variations while the train is running. During the field trial, the smartphones used could make connections through offloading.