• Proceedings of the IEEK Conference
• /
• summer
• /
• pp.110-113
• /
• 2004

Underwater acoustic(UWA) communication is one of the most difficult field because of several factors such as multipath propagation, high temporal and spatial variability of channel conditions. Therefore, it is important to model and analyze the characteristics of underwater acoustic channel such as multipath propagation, transmission loss, reverberation, and ambient noise. In this paper, UWA communication channel is modeled with a ray tracing method and applied to image transmission. Quadrature phase shift keying(QPSK) and multichannel decision feedback equalizer(DFE) are utilized as phase-coherent modulation method and equalization technique, respectively. The objective is to improve the performance of vertical sensor array than that of single sensor in the viewpoint of bit error rate(BER), constellation output, and received image quality.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.1586-1589
• /
• 2002

RLS algorithm is a kind of the adaptive algorithms in smart antennas and adapts the weight vector using the difference between the output signal of array antennas and the known training sequence. In this paper, we propose a new algorithm based on the RLS algorithm. It calculates the error signal with reference signal derived from blind scheme. Simulation results show that the proposed algorithm yields more user capacity by 67∼74% than other blind adaptive algorithms(LS-DRMTA, LS-DRMTCMA) at the same BER and the beamformer forms null beams toward interference signals and the main beam toward desired signal.

• International Journal of Internet, Broadcasting and Communication
• /
• v.15 no.3
• /
• pp.8-13
• /
• 2023

We propose a method for removing interference and noise to estimate target information. In wireless channels, information signals are subject to interference and noise, making it is difficult to accurately estimate the desired signal. To estimate the desired information signal, it is essential to remove the noise and interference from the received signal, extracting only the desired signal. If the received signal noise and interference are not removed, the estimated information signal will have a large error in distance and direction, and the exact location of the target cannot be estimated. This study aims to accurately estimate the desired target in space. The objective is to achieve more presice target estimation than existing methods and enhance target resolution.An estimation method is proposed to improve the accuracy of target estimation. The proposed target estimation method obtains optimal weights using linear constraints and the minimum variance method. Through simulation, the performance of the proposed method and the existing method is analyzed. The proposed method successfully estimated all four targets, while the existing method only estimated two targets. The results show that the proposed method has better resolutiopn and superior estimation capability than the existing method.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.49 no.2
• /
• pp.130-136
• /
• 2012

In this paper, we propose a near-field range estimation method for a uniform linear array that can calibrate bearing estimation error which give a bad influence on a range estimation process. When a range is fixed, the bearing error is calibrated to maximize the beamformer output by the proposed algorithm based on the gradient method. Simulation results show that the proposed algorithm can compensate the bearing error which is less than the mainlobe beamwidth so that reduce the range estimation error as similar as the case of no bearing error.

• The Journal of the Acoustical Society of Korea
• /
• v.25 no.1
• /
• pp.30-35
• /
• 2006

In this paper. we Propose a frequency domain beamforming algorithm composed of inverse-filtering stages followed by a MVDR (Minimum-Variance Distortionless Response) beamformer or a GSC (Generalized Sidelobe Canceller). The proposed method is shown to require less complexity than the conventional RTF-MVDR and TF-GSC. respectively, and it is shown that the Proposed method is equivalent to the conventional RTF-MVDR and TF-GSC in optimum solution. In order to evaluate the performance of the Proposed method. speech recognition experiments are performed using the speech database recorded in a car. The Proposed method shows equal or slightly degraded Performance comparing to the conventional methods in terms of the speech recognition rate.

• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.11
• /
• pp.567-570
• /
• 1997

In a conventional digital beamformer received signal were sampled at least Nyquist rate of its maximum frequency. But it is wide band signal and its coherent sum must be obtained, the sampling clock of about $8f_o$ and $16f_o$ is necessary or high quality images. This paper described how image qualities are varied according to sampling clock. Mainly, we compared the SDF(Sampled Delay Focusing) that had maximum precision of $8f_o$ with $16f_o$ sampling system and analyze its characteristics.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.6
• /
• pp.1583-1591
• /
• 1998

In this paper, we consider the quasi maximum likelihood(quasi-ML) detector which uses antenna arrays in asynchronous time-varing channels. It is shown that the proposed quasi-ml detector can be regarded as a beamformer followed by a decorrelator: a method based on the eigendecomposition of the correlation matrix of the inverse-filtered signal is proposed to estimate the channel vectors. We also show that the proposed algorithm estimates the channel vector within small mismatch loss in severe propagation environment through computer simulations.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.9 no.2 s.25
• /
• pp.20-25
• /
• 2006

Low frequency towed line array with high array gain and beam resolution is a long range surveillance sensor for anti-submarine warfare. The beam characteristics is however deteriorated due to the distorted line array sensor caused by low towing speed, wind, current, and towing ship maneuvering. An adaptive beamforming method is utilized in this paper to enhance the distorted line array beam performance by estimating and compensating the nonlinear array shape. A polynomial curve fitting in the least square sense is used to estimate the array shape iteratively with the distributed heading sensors data along the array. Real time array shape estimation and nonlinear array beam calculation is applied to a very long towed line array sensor system and the beam performance is evaluated and compared to the linear beamformer for the simulation and sea trial data.

• Journal of Electrical Engineering and information Science
• /
• v.1 no.1
• /
• pp.156-159
• /
• 1996

Element failure occurs with high probability for every array used in the real world ; that is, it is a common phenomenon that there are one or more elements with no output. Element failure produces an elevated sidelobe level and fails to reject the interference signals in an adaptive beamformer. In this paper, we present the adaptive beamforming algorithm for array with element failure. The presented method minimizes the array output power subject to a set of linear constraints which maintain the frequency response in the look direction and force the weights of the inoperative elements to zero. Numerical results have been included.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.14 no.5
• /
• pp.549-560
• /
• 1989

In this paper, the method of determining the initial weighting vlaues fuctioning as a filter under the Directional Constrained Minimization of Power(DCMP) algorithm is presented. By analyzing the sideband beamformer with the Finite Impulse Response (FIR) filter concepts, the constraints of any desired directions are obtained and the initial weighing values with fast adaptation time are formulated from those constraints. By applying this proposed initial weighting values to the DCMP and the spatial averaging processor, the interference of a desired direction and the coherent noises are eliminated at the same time. The improvement of this method compared with the existing algorithm is confirmed by computer simulation.