• Journal of the Korea Institute of Military Science and Technology
• /
• v.12 no.3
• /
• pp.360-367
• /
• 2009

In this paper, the RADANT phase scanning scheme and the transmission-type loaded line phase shifter scheme, which are applicable to the phased array systems, are studied. Using these two schemes, a theoretical method to design an electronic beam steering RADANT lens is introduced. The validity of the presented theoretical method is verified through the simplified circuit simulation results.

• Journal of Korean Society of Steel Construction
• /
• v.16 no.1 s.68
• /
• pp.61-72
• /
• 2004

This study investigated the inelastic lateral-torsional buckling of simply supported beams under a central concentrated load and a uniformly distributed load. A line-type finite element, method was incorporated with the "so-called" simplified and polynomial patterns of residual stresses. The effect of the load height was also considered in this study. The polynomial residual stresses assumed in this study was a quartic distribution in the flange and a parabolic distribution in the web. The inelastic lateral-torsional buckling of beam was analyzed with four different I-sections manufactured in Korea. Results obtained in this study were compared with KSDM(design method in the 1995 Korean Steel Designers' Manual). The design method in KSDM was found to be generally conservative with and without a sub-beam attached to the main beam, which acted as an intermediate restraint.

• International conference on construction engineering and project management
• /
• 2024.07a
• /
• pp.495-500
• /
• 2024

This paper aims to make clear the transition process of information transfer in wooden post and beam construction in Japan during the introduction and development of machine precutting technology. The machine precutting technology started from 1970s and developed toward line production or automated CAD-CAM production and have got over 90 % market share in the Japanese newly built wooden houses. Based on literature review and interviews with manufacturers of precutting machines, the transition of wooden post and beam construction houses was divided into four periods: i) before the introduction of precutting, ii) the introduction of precutting (the early stage), iii) the automation of precutting, and iv) the maturity of precutting, and the review reveals how the information of design and processing was made and transfered in each period. In addition, the modeling and comparison of information transfer in each period visually shows the transition of information transfer with the development of machine precutting technology. Before the introduction of precutting, when carpenters were responsible for the generation of both design and processing information, information was coordinated at each stage of the process based on expert knowledge, but highly precise and uniform processing of machine precutting reduced the need for such coordination skills. On the other hand, the review suggested that the precut processing technology has changed step by step based on the traditional technical system, which has maintained the rational transfer of information.

• Proceedings of the KIEE Conference
• /
• 1997.07e
• /
• pp.1779-1781
• /
• 1997

The 2.0 GeV Pohang Light Source (PLS) is consisted of a full energy Linac and a storage ring. Four kicker magnets are installed in the storage ring tunnel to move the stored beam orbit in the storage ring closer to the injected beam from the beam transfer line. The injected beam then falls into the storage ring beam dynamic aperture. A kicker magnet modulator drives all four kicker magnets to maintain field balance and also synchronized kick of the beam. The kicker modulator can handle 2 GeV full energy beam. The kicker magnet modulator is installed in the storage ring tunnel and under stable operation. Specification of the kicker magnet modulator is ${\sim}6.0{\mu}s$ pulse-width, 200 ns flat-top width with ${\pm}0.2%$ regulation, ${\sim}24\;kA$ peak current, and 10 Hz repetition rate. Two thyratron switches (EEV CX-1536AX) are used in the system. In this article, design, and experimental results of the kicker magnet modulator are discussed.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.6
• /
• pp.82-87
• /
• 2012

The purpose of this study is to produce a side impact beam with high tensile steel using a roll forming process. The door side impact beam plays an important roll in a car because it protects passengers from external crash. The roll forming process is a continuous bending process wherein a long metal sheet is bended as it continuously passes several rolls. The characteristic of this study is that an impact beam is produced by a continuous process using a ultra high strength steel without a hardening heat treatment. A model was determined by analysing plasticity of a cross section shape considering high strength. Design parameters of the impact beam was determined by crash-analysing the model. Workpiece products were manufactured by designing dies for roll forming and setting them up in a following process line. Results of a bending test and a FEM analysis was considered and reviewed.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.5
• /
• pp.16-22
• /
• 2001

A novel microstrip circular slot antenna fed by a spiral line is presented in this paper. This antenna is a planar equivalent structure of an eccentric spiral antenna generates a circularly-polarized wave. We have investigated the input impedance and radiation characteristics of this antenna by using an EM (electromagnetic) simulator, and obtained a design method [or optimum structure. The main characteristic of the antenna is that the main beam direction is off-normal to the antenna plane and moves linearly into ${\theta }$ and ${\phi }$ direction as the frequency increases. This feature allows one to predict the main beam direction easily for a given operating frequency. This antenna has axial ratio lower than 3 dB in the direction of main beam over one octave bandwidth.

• Journal of IKEEE
• /
• v.7 no.1 s.12
• /
• pp.16-21
• /
• 2003

A rigorous modal transmission-line theory (MTLT) based on effective dielectric method (EDM) is introduced and developed to analyze the polarization beam-splitting of optical rib-type directional coupler with three guiding layers. Furthermore, to confirm the validity of approach proposed in this paper, we compare our results with those ones of BeamPROP, which is a commercial software package used widely. Consequently, the numerical results reveal that the hybrid modes incident into a guiding channel of rib-type coupler are split well through upper and lower guiding channels in a polarization length.

• Steel and Composite Structures
• /
• v.26 no.5
• /
• pp.621-634
• /
• 2018

Flush end-plate (FEP) beam-to-column joints are commonly used for gravity load resisting parts in steel multi-storey buildings. However, in seismic resisting structures FEP joints should also provide rotation capacity consistent with the global structural displacements. The current version of EN1993-1-8 recommends a criterion aiming at controlling the thickness of the end-plate in order to avoid brittle failure of the connection, which has been developed for monotonic loading conditions assuming elastic-perfectly plastic behaviour of the connection's components in line with the theory of the component method. Hence, contrary to the design philosophy of the hierarchy of resistances implemented in EN1998-1, the over strength and the hardening of the plastic components are not directly accounted for. In light of these considerations, this paper describes and discusses the results obtained from parametric finite element simulations aiming at investigating the moment-rotation response of FEP joints under cyclic actions. The influence of bolt diameter, thickness of end-plate, number of bolt rows and shape of beam profile on the joint response is discussed and design requirements are proposed to enhance the ductility of the joints.

• Current Optics and Photonics
• /
• v.2 no.3
• /
• pp.241-249
• /
• 2018

We report a midinfrared dual-field-of-view (FOV) optical system design for an airborne electro-optical targeting system. To achieve miniaturization and weight reduction of the system, it has a common aperture and fore-optics for three different spectral wavelength bands: an electro-optic (EO) band ($0.6{\sim}0.9{\mu}m$), a midinfrared (IR) band ($3.6{\sim}4.9{\mu}m$), and a designation laser wavelength ($1.064{\mu}m$). It is free to steer the line of sight by rotating the pitch and roll axes. Our design co-aligns the roll axis, and the line of sight therefore has a fixed entrance pupil position for all optical paths, unlike previously reported dual-FOV designs, which dispenses with image coregistration that is otherwise required. The fore-optics is essentially an achromatized, collimated beam reducer for all bands. Following the fore-optics, the bands are split into the dual-FOV IR path and the EO/laser path by a beam splitter. The subsequent dual-FOV IR path design consists of a zoom lens group and a relay lens group. The IR path with the fore-optics provides two stepwise FOVs ($1.50^{\circ}{\times}1.20^{\circ}$ to $5.40^{\circ}{\times}4.32^{\circ}$), due to the insertion of two Si lenses into the zoom lens group. The IR optical system is designed in such a way that the location and f-number (f/5.3) of the cold stop internally provided by the IR detector are maintained when changing the zoom. The design also satisfies several important performance requirements, including an on-axis modulation transfer function (MTF) that exceeds 10% at the Nyquist frequency of the IR detector pitch, with distortion of less than 2%.

• Korean Journal of Computational Design and Engineering
• /
• v.8 no.3
• /
• pp.150-156
• /
• 2003

Direct Metal Deposition (DMD) is a new additive process producing three-dimensional metal components or tools directly from CAD data, which aims to take mold making and metalworking in an entirely new direction. It is the blending of five common technologies: lasers, CAD, CAM, sensors and materials. In the resulting process, alternatively called laser cladding, an industrial laser is used to locally heat a spot on a tool-steel work piece or platform, forming a molten pool of metal. A small stream of powdered tool-steel metal is then injected into the metal pool to increase the size of the molten pool. By moving the laser beam back and forth, under CNC control, and tracing out a pattern determined by a computerized CAD design, the solid metal part is eventually built line-by-line, one layer at a time. DMD produces improved material properties in less time and at a lower cost than is possible with traditional fabrication technologies.