• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2003년도 추계학술발표대회 개요집
• /
• pp.18-20
• /
• 2003

Optimal processing and system to produce the laser welded tube for one body formed bumper beam are studied. The calculated size of tube is a thickness of 1.4mm, diameter of 105.4mm and length of 2000mm. The tube is shaped from cool rolled high strength steel sheet(tensile strength: 60kgf/$\textrm{mm}^2$ grade). Two roll bending method is the optimal tube shaping process compared to UO-bending, bending on press brake, multi-step continuous roll forming and 3 roll bending methods. Weld quality monitoring and seam tracking along the butt-joint lengthwise to the tube axis are also studied. The longitudinal butt-joint is welded by the $CO_2$ laser welding system equipped with a seam tracker and plasma sensor. The constructed $CO_2$ laser tube welding system can be used for the precision seam tracking and the real-time monitoring of weld quality. Finally, the obtained laser welded tube can be used for one-body formed automobile bumper beam.

• 한국군사과학기술학회지
• /
• 제22권3호
• /
• pp.320-331
• /
• 2019

In this paper, we propose a method of TMA(Target Motion Analysis) performance improvement using target elevation tracking and fusion in conformal array sonar. One of the most important characteristics of conformal array sonar is to detect a target elevation by a vertical beam. It is possible to get a target range to maximize advantages of the proposed TMA technology using this characteristic. And the proposed techniques include target tracking, target fusion, calculation of target range by multipath as well as TMA. A simulation study demonstrates the outstanding performance of proposed techniques.

• Journal of Positioning, Navigation, and Timing
• /
• 제13권3호
• /
• pp.257-268
• /
• 2024

The Korea Augmentation Satellite System (KASS) satellite was successfully launched and service is being started. By receiving messages transmitted from the KASS satellite, users can employ the messages to improve positioning accuracy or to verify the integrity of Global Positioning System (GPS). In this paper, we propose a test method for a beam-formed GPS receiver developed to improve the survivability of KASS augmented messages that can enhance positioning accuracy even in an environment with jamming or interfering signals. Through the test method proposed in this paper, quantitative verification is performed for a beam-formed GPS receiver aimed at maintaining the augmented navigation solution to which KASS augmented messages are applied by tracking the KASS signal as much as possible under conditions where the jamming signal strength is gradually increasing. In addition, the proposed test method includes three conditions; first, a static lab test method for repeated verification of functions under the same conditions; second, a static outdoor test method for performance verification in an operating environment of a platform equipped with the beam-formed GPS receiver; and finally, a dynamic lab test method for performance verification of a moving platform equipped with the beam-formed GPS receiver toward a jammer. In this paper, we propose a method for simulating the jamming signal incident direction through the phase delay of an RF cable designed to prevent unintentional jamming signal emission in both lab and outdoor tests, and a method of applying test software for injecting a jamming signal to compare the survivability performance consistently according to the presence or absence of beamforming signal processing. Through the proposed test method, it was verified that the augmented navigation solution could be output for a longer time period when the beamforming signal processing was applied to the KASS satellite signal in the beam-formed GPS receiver.

• 전자공학회논문지
• /
• 제52권5호
• /
• pp.206-213
• /
• 2015

함정용 전자광학추적장비의 센서부에서 해수면반사파에 의해 발생하게 되는 영상추적간섭 현상을 최소화하고자 전방향성, 점진적인 굴절률 및 표면 요철구조를 갖는 산화아연에 플루오르화마그네슘을 코팅한 반사방지막을 전자빔 증착 장비를 통해 제작하였다. 최적화된 산화아연에 플루오르화마그네슘을 코팅한 반사방지막은 기존의 산화아연 반사방지막과 비교하여 점진적인 굴절률 변화에 따라 표면 프레넬 반사를 최소화하고 이를 통해 전자광학추적장비의 영상추적간섭 현상을 제거하는 장점이 있다. 본 실험을 통해, 산화아연에 플루오르화마그네슘을 코팅한 반사방지막이 다양한 전자광학장비의 반사방지막으로써 적용이 가능함을 확인하였다.

• 수산해양기술연구
• /
• 제39권4호
• /
• pp.318-325
• /
• 2003

SPB방식과 시스템을 수조실험에서 검증하였다. 이상의 연구 성과를 정리하면 다음과 같다. 1) 핑거와 비슷한 펄스를 하이드로폰으로부터 발생시켜 수파기의 협빔과 광빔의 양빔 모드의 위상빔어레이 중심간 거리를 보정하여 전후, 좌우의 위상빔에 대한 위치측정 정도를 비교, 분석하였다. 측정위치오차는 협빔 모드의 전후위상빔에서 6.4cm, 좌우위상빔에서 6.3cm로 위치측정 정도는 고정도 이었으며, 광범 모드에서는 각각 24cm, 23cm로 협빔 모드보다 위치측정 정도는 4 배 정도 낮았다. 2) 핑거를 이미 계산된 위치로 이동시켜 핑거동기방식에 의한 거리정보와 SSBL 방식에 의한 방위정보를 자동, 연속으로 측정하였으며, 핑거동기 방식에 의한 핑거의 측정거리, SSBL. 핑거동기 바이오텔레메터리 방식에 의한 핑거의 측정위치, 핑거의 측정이동속도를 구해 기존의 값과 비교하여 새롭게 개발한 방식과 시스템의 유효성을 검증하였다. 핑거동기 방식에 의해 구한 핑거의 측정거리 오차는 1.8cm, SSBL. 핑거동기 바이오텔레메터리 방식에 의해 구한 핑거의 측정위치 오차는 7.7cm로 고정도로 측정이 기능하였으며, 핑거의 측정이동속도는 기존의 값에 대체적으로 일치하였다.

• 한국전자파학회논문지
• /
• 제25권2호
• /
• pp.235-244
• /
• 2014

항공기 능동 위상 배열(AESA) 레이더에 적용할 수 있는 레이더 안테나 부배열 채널 구성 및 보정에 대한 내용을 기술하였다. 설계된 부배열 채널 구조의 성능시험을 위하여 디지털 빔 형성이 가능한 12개 부배열 채널을 갖는 AESA 레이더 시연기(demonstrator)를 설계하고 제작하였다. 제작한 부배열 채널에서는 채널 간 크기 및 위상 오차가 필수적으로 발생하게 된다. 본 논문에서는 부배열 채널 간 발생하는 오차를 보정하는 방법을 제안하였다. 오차 보정후 채널의 신호 레벨과 모노펄스 기울기를 측정하여 보정된 효과를 확인하였다. 채널 보정 후 부배열 채널로 형성된 디지털 모노펄스 채널을 검증하기 위하여 별도로 구성된 아날로그 모노펄스 채널과 성능을 비교하였다. AESA 레이더 시연기의 성능 확인을 위하여 지상에서 원전계(far field) 시험을 수행하였다. 표적 모의 장치를 이용하여 단일 표적을 생성하고, 동일한 파형 및 탐색 조건하에서 탐지 및 추적시험을 수행하였다. 설계된 12개 부배열 채널 신호로 구성한 디지털 모노펄스 채널의 표적 탐지 추적 성능이 기존 아날로그 모노펄스 채널의 성능과 유사함을 확인하였다. 또한, 부엽으로 입사하는 재머 신호에 대하여 부배열 채널에서 적응 빔 형성(adaptive beam-forming) 기능이 효과적으로 동작함을 확인하였다.

• International Journal of Precision Engineering and Manufacturing
• /
• 제6권3호
• /
• pp.19-23
• /
• 2005

To minimize the weld defect in manufacturing of the welded tube by using $CO_2$ laser, the monitoring of the welding quality and the seam tracking along the butt-joint lengthwise to the tube axis are studied. The longitudinal butt-joint is shaped from $60kgf/mm^2$ grade steel sheet by 2 roll bending method, and welded by the $CO_2$ laser welding system equipped with the seam tracker and plasma sensor. The laser welded tube has the thickness of 1.5mm, diameter of 105.4mm and length of 2000mm. The precise positioning of the laser beam on the butt-joint to be assembled is obtained within $200{\mu}m$ by the laser vision sensor. The artificial defects in the butt-joint are well observed by the signal of plasma intensity measured from the plasma sensor of UV wavelength range within 400nm. The developed $CO_2$ laser tube welding system has the function of the precision seam tracking and the real-time monitoring of the welding quality. In conclusion, the laser welded tube can be used for manufacturing of automobile chassis and components after hydro-forming.

• 한국전자통신학회논문지
• /
• 제18권6호
• /
• pp.1245-1258
• /
• 2023

산림자원의 효율적인 관리를 위한 정보획득을 위해서는 서로 다른 센서를 장착한 다수의 무인항공기가 동시에 운영되어야 한다. 이에 따라 지상제어국 안테나는 지속적으로 대국에 대한 추적을 수행해야 할 뿐만 아니라 타 무인항공기에 대한 전파간섭 영향을 억제해야 한다. 본 논문에서는 위상배열안테나 시스템을 기반으로 구축된 지상제어국에 있어, VPR 알고리즘을 기반으로 지속적인 추적 및 전파간섭 억제를 위한 빔 형성 기법에 관하여 연구하였다. 다양한 무인항공기 운영 환경에 대한 모의실험 결과, 제시된 기법을 기반으로 운항중인 무인항공국에 대한 지속적인 추적을 할 수 있을 뿐만 아니라, 다수의 전파간섭원에 대해 지속적인 패턴 널을 형성하여 전파간섭을 억제할 수 있음을 확인하였다.

• 소음진동
• /
• 제6권6호
• /
• pp.763-770
• /
• 1996

This paper proposes a method to determine the initial shape and size of the suspension beam of an optical pickup actuator subjected to specified dynamic characteristics. For the analysis, a simplified model consisting of a concentrated mass, rotational springs and beams is developed. Based on this model, the key dimensionless design parameters are introduced, which govern low-frequency vibration characteristics i. e., the resonant frequencies in the tracking and focusing directions. A systematic procedure for sizing and shaping the actuator suspension beams is described and applied to a sample case. The effectiveness of the present technique is verified through the comparison of the present and the finite element results.

• 수산해양기술연구
• /
• 제35권3호
• /
• pp.301-311
• /
• 1999

The investigation to evaluate the possible effects of fish behaviour on acoustic target strength was carried out during the 1997 and 1998 hydroacoustic-demersal trawl surveys in the southern waters of Korea.The swimming speed and the target strength of individual, acoustically resolved fished swimming through the sound beam were measured using the split-beam tracking method on board R/V Kaya.The results obtained can be summarized as follows:1. The alongship and athwartship angles between -3dB poionts of a hull mounted 38 kHz split beam tranducer used in these surveys was >$3.76^{\circ}\;and\;6.74^{\circ}$ respectively, and the equal energy contour obtained from the measured beam pattern showed approximately the circular pattern. 2. The swimming speed measured off the south coast of Sorido in 23 January 1997 ranged 0.10 to 0.80 m/s with the average swimming spped of 0.36 m/s, and the target strength ranged -64.8 to -31.7 dB with the average target strength of -52.7 dB. The most dominant species sampled in this survey area were Japanese scaled sardine, Sardinella zunasi and Konoshiro gizzard shad, Konosirus punctatus, respectively.3. The swimming speed measured off the east coast of Kojedo in 24 March 1997 ranged 0.10 to 1.10 m/s with the average swimming speed of 0.40 m/s, and the target strength ranged -64.8 to -51.5 dB with the average target strength of -59.2 dB. The most dominant species sampled in this survey area were Swordtip squid, Photololigo edulis, Konoshiro gizzard shad and Japanese flying squid, Toddarodes pacificus, respectively and the swimming activity of these species seems to be controlled at speeds between 0.20 and 0.60 m/s. 4. The swimming speed measured the south coast of Kojedo in 25 March 1997 ranged 0.10 to 1.40 m/s with the average swimming speed of 0.51 m/s and the target strength ranged -64.3 to -47.7 dB with the average target strength of -55.1 dB. The most dominant species sampled in this survey area were Swordtip squid, Blotchy sillage, Sillago maculata and japanese scaled sardine, respectively and the swimming activity of these species seems to be controlled at speeds between 0.20 and 0.70 m/s.5. The swimming speed measured during morning twilight in the southeastern water of Cheju Island in 11 July 1998 ranged 0.20 to 1.0 m/s with the average swimming speed of 0.53 m/s, and the target strength ranged -65.0 to -47.0 dB with the average target strength of -57.1 dB. The most dominant species sampled in this survey area were Swordtip squid, Black scraper, Thamnaconus modesutus and japanese flying squid, respectively and the tile angle ranged$ +28^{\circ}\;to\;+2^{\circ}$ with the average tilt angle of -8.1$^{\circ}$ showing the downward migration.