• 한국구조물진단유지관리공학회 논문집
• /
• 제4권3호
• /
• pp.197-204
• /
• 2000

Tensile strength (stress) of bar splice is important in the research of mechanical behavior of reinforced concrete structures-beam, column etc.- with bar splice. The purpose of this research is to evaluate the flexural behavior - deflection of beam specimens, strain of main bars - of reinforced concrete beam with Lock Joint Coupler. To make a comparative research, reinforced concrete beam specimens with normal deformed bar and lap splice are tested and analyzed. Test results, Comparing a deflection of three types flexural specimens, a flexural specimen with Lock Joint Coupler is 40% greater than the other flexural specimens. At the center of flexural specimen, the strain of main bar(D29) with lock joint coupler is 50% less, and vice versa, at the point of 14cm far from the center of flexural specimen, the strain of main bar(D29) with lock joint coupler is 9% larger than the strain of main bar(D29) which calculated using the classical flexure theory. A discords, between a deflection behavior of the flexural specimens and a strain of the main bar, are caused by the difference of strain between the lock joint coupler and main bar, near the lock joint coupler. So, additional research is need to verify as stated above discords.

• 한국통신학회논문지
• /
• 제19권1호
• /
• pp.100-110
• /
• 1994

본 연구에서는 효율적인 광원과 광도파로간의 결합방법으로서 많은 연구가 진행중인 monolithic laser-waveguide coupler 특성해석에 beam propagation method를 도입하여 기존의 방법과 비교검토 한 결과 타당성을 입증할 수 있었으며, 또한 결합효율을 향상시키기 위하여 taper 구조를 가진 monlithic laser-waveguide coupler를 제시하였다. monolithic laser-waveguide coupler는 능동소자인 laser의 특성과 수동소자인 waveguide의 특성을 동시에 가지고 있으므로 고려하여야할 요소가 매우 많고, 또 각 요소들의 변화에 따라 결합기의 성능이 크게 좌우되므로 그 특성 연구가 많은 어려움이 있었다. 때문에 본 연구에서는 방향성 결합기를 사용한 모델을 해석하는 방법으로 기존의 coupled mode 이론을 사용할 수도 있겠으나, 본 연구에서와 같이 많은 변수를 가지는 경우의 해석에는 적용하기 어렵다는 단점 때문에 beam propagation method를 사용한 해석을 시도하였다. 또한 해석에 있어서 가장 기본이 되는 초기전개의 계산에서도 종래의 연구에서와 달리 근사식을 이용해 전계를 계산하지 않고, 주어진 구조에 대하여 직접 finite difference method를 적용하여 초기전계를 구하였다. 이러한 새로운 시도들이 가지는 잇점을 방법과 비교하여 알아 보았으며, 새로운 방법의 적용을 통하여 보다 많은 변수를 고려하여 monolithic laser-waveguide coupler의 특성을 연구할 수 있었다. 이러한 과정을 통하여 결합기의 특성을 파악하고 그 결과로 monolothic laser-waveguide coupler의 특성중 가장 중요한 결합특성을 향상 시키기 위해서 taper영역을 가지는 monolothic laser-waveguide coupler를 제안하였다. 본 연구에서 제안한 구조에 대하여 특성을 조사해본 결과 79%정도의 좋은 결합효율을 얻을 수 있었다.

• 전기학회논문지P
• /
• 제63권3호
• /
• pp.200-205
• /
• 2014

In this paper, 5.8GHz band $4{\times}4$ Butler matrix is designed using easily accessible commercial $90^{\circ}$ hybrid coupler and semirigid coaxial cable as a transmission line. This Butler matrix is very flexible to changes of antenna system specification like a frequency band because $90^{\circ}$ hybrid coupler changing is all to do. The result of design is the distance of $2{\times}2$ array antenna element is $\sqrt{2}{\lambda}/4$, the 4 beam directions are diagonal of array antenna and phase shifter is not necessary. The beam width is roughly $25^{\circ}$ narrower because of array antenna geometry and the side lobe is about 10dB higher partially than theoretical beam pattern. But the overall beam pattern is similar with theoretical beam. This Butler matrix can be applied to switching beam antenna of 5.8GHz band Wi-Fi and WAVE system.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 추계 학술논문 발표대회
• /
• pp.169-170
• /
• 2011

In the connection of green frame, the bottom rebar of the precast concrete beam needs joint or anchorage to ensure structural integrity. However, given the characteristics of composite precast concrete joint, enough length over which rebar can be anchored or lap-spliced is not secured. In addition, due to issues with constructability, cost or quality, it is difficult to apply welding or mechanical connection techniques. Therefore, this study analyze the requirement for a bolt-type rebar coupler as a solution for the coupling issue between the lower rebars of green frame beam. The requirement for bolt-type rebar coupler proposed herein will provide basic data for development studies of the rebar coupler.

• Journal of Electrical Engineering and Technology
• /
• 제4권3호
• /
• pp.405-409
• /
• 2009

A polarization-independent multiwavelength-switchable fiber filter is proposed based on a polarization beam splitter and fiber coupler, which can function as a polarization-independent transmission or reflection-type interleaving filter. The proposed filter consists of a polarization beam splitter and a Sagnac birefringence loop composed of a 50:50 coupler, high birefringent fibers, and two quarter-wave plates. In the proposed filter, a transmission-type interleaver with a channel isolation > 18 dB or a reflection-type one with a channel isolation of ${\sim}3$ dB, whose channel spacing and switching displacement were 0.8 and 0.4 nm in common, respectively, could be obtained. A channel interleaving operation could be performed by the proper control of waveplates within the Sagnac birefringence loop.

• 한국소음진동공학회논문집
• /
• 제16권11호
• /
• pp.1172-1178
• /
• 2006

Measurement of blade strain with sensors directly installed on the blade has one critical issue, how to send the sensor signal to the ground. Strain-gauges have been dominantly used to directly measure stress of a blade and either a slip ring or a telemetry system has to be used to send measured signal to the ground. However, both systems have many inherent problems and sometimes very severe limitations to be practically used. In this paper, new on-line strain monitoring method using. FBG(Fiber Bragg Grating) sensors and a beam coupler is introduced. Measurement of rotor stress using FBG sensors is nothing new, but unlike other system which installs all necessary instruments on the rotor and use telemetry system to send data to the ground, this system makes use of light's unique characteristic - light travels through space. In this new approach, single optical fiber with many FBG sensors is installed on the blade and all other necessary instruments can be installed at ground thereby giving tremendous advantages over slip ring or telemetry system. A reference sensor is also introduced to compensate the beam coupler's transmission loss change due to rotation. The suggested system's good performance is demonstrated with experiments.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.976-979
• /
• 2002

A focusing grating coupler (FGC) was not fabricated by the 'Continuous Path Control' writing strategy but by an electron-beam lithography system of more general exposure mode, which matches not only the address grid with the grating period but also an integer multiple of the address grid resolution (5 nm), To more simplify the fabrication, we are able to reduce a process step without large decrease of pattern quality by excluding a conducting material or layer such as metal (Al, Cr, Au), which are deposited on top or bottom of an e-beam resist to prevent charge build-up during e-beam exposure. A grating pitch period and an aperture feature size of the FGC designed and fabricated by e-beam lithography and reactive ion etching were ranged over 384.3 nm to 448.2 nm, and $0.5{\times}0.5mm^2$ area, respectively, This fabrication method presented will reduce processing time and improve the grating quality by means of a consideration of the address grid resolpution, grating direction, pitch size and shapes when exposing. Here our investigations concentrate on the design and efficient fabrication results of the FGC for coupling from slab waveguide to a spot in free space.

• 한국음향학회지
• /
• 제3권2호
• /
• pp.23-29
• /
• 1984

In this paper surface acoustic wave beam track changers using symmetric multistrip coupler are designed on the basis of the perturbation theory, and its characteristics are studied. SAW beam track changers, which have the configuratio of the periodic array of metal strips, are designed with the following specifications ; the number of strips : 140, the strip period: 0.25λ, the ratios of the strip width to the period a/p: 0.5, 0.375, 0.25, respectively, and approximately consistent with the theoretical values, and also the bulk wave mode and the 2nd-order effects are suppressed by these track changers.

• 조명전기설비학회논문지
• /
• 제23권10호
• /
• pp.7-13
• /
• 2009

본 논문에서는 편광 빔 분배기와 광섬유 결합기를 이용하여, 입력 편광에 무관한 반사형 및 투과형 인터리빙 필터로 동작할 수 있는 다파장 스위칭 가능한 광섬유 인터리빙 필터를 제안한다. 제안된 필터는 50:50 광섬유 결합기, 편광 유지 광섬유, 그리고 2개의 1/4 파장판으로 구성되는 Sagnac 복굴절 필터의 출력 양단을 편광 빔 분배기의 출력 양단과 연결함으로써 구성하였다. 제작된 필터는 반사형 및 투과형 모두 0.8[nm]의 채널 간격을 가지는 것으로 측정되었으며, 필터 내부의 1/4 파장판의 방위각을 조절함으로써 0.4[nm]의 스위칭 변위를 갖는 인터리빙 동작이 가능하였다. 또한, 필터의 채널 고립도는 반사형과 투과형에서 각각 ~3[dB]와 > 18[dB]로 측정되었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 D
• /
• pp.1528-1530
• /
• 1998

In this work, a possible new PD detection technique, based on the Michelson Interferometer, has been proposed. Laser beam transmitted by optical fiber is spliced into two-laser beam by 50/50 coupler, one is reflected on diaphragm, which is vibrated by ultrasonic sound, and then modulated. The other one is reference beam. They are collected into 50/50 coupler making interferenced beam which could be detected by photo detector.