• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.315-315
• /
• 2006

A variable surface coating with the potential to fulfill the requirements of industry will be presented. Via controlled radical polymerization methods from a functionalized Polymethylsilsesquioxane delivers an inorganic-organic block copolymer, which can be easily modified and tuned for different applications. Spin coated or dip coated on various substrates show promising results. By using different block copolymers the contact angle on a silicon wafer can be varied in a range of $90^{\circ}\;up\;to\;145^{\circ}$ After curing and complete condensation a perfect adhesion on glasses, plastics and metals is achieved.

• Steel and Composite Structures
• /
• v.17 no.3
• /
• pp.305-320
• /
• 2014

The lowest critical value of the compressive force acting in the plane of symmetrically laminated quasi-isotropic thin rectangular plates is investigated. The critical buckling loads of plates with different types of lamination and aspect ratios are parametrically calculated. Finite Differences Method (FDM) and Galerkin Method are used to solve the governing differential equation for Classical Laminated Plate Theory (CLPT). The results calculated are compared with those obtained by the software ANSYS employing Finite Elements Method (FEM). The results of Galerkin Method (GM) are closer to FEM results than those of FDM. In this study, the primary aim is to conduct a parametrical performance analysis of proper plates that is typically conducted at preliminary structural design stage of composite vessels. Non-dimensional values of critical buckling loads are also provided for practical use for designers.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2003.11a
• /
• pp.598-602
• /
• 2003

The general red-mud minerals consist of hematite, sodalite, anatase, quartz, gibbsite and miner impurities. This gives serious environmental damage for the ocean disposal. It mixed with chloride compound and the content of chlorine is about 2,000-3,000ppm. This paper can be suggested the chloride reduction technology that is applied basically mineral processing by physical separation. Then it can be possible to produce the totally 24wt. $\%$ useful red-mud which chloride content is less then 400ppm.

• The Plant Pathology Journal
• /
• v.16 no.5
• /
• pp.283-285
• /
• 2000

Two field tests were conducted in 1995 to examine the effects of composts and soil amendments on physicochemical properties of soil in relation to Phytophthora root and crown rot of bell pepper. Chitosan, crab shell waste, humate, sewage sludge-yard trimmings, and wood chips were applied to test plots, some of which affected the levels of P, K, Mg, pH, and H. Physicochemical properties were not related with disease incidence, but percent organic matter, estimated nitrogen release, K, and Mg were correlated with total microbial activity. The elements K and Mg were especially responsible for the increased soil microbial activity that could affect development of root and crown rot of pepper.

• Journal of Veterinary Clinics
• /
• v.14 no.1
• /
• pp.37-41
• /
• 1997

For the inspection of the occurrence situation of porcine pleuropneumonia and serotyping of Actinobacillus pleuropneumoniae strains isolated from lung lesions of pig in Korea, a series of experimentation have been carried out by the isolation and identification of A pleuropneumoniae, serotyping by coagglutination test, observation of lung lesion and clinical signs from 360 cases of porcine pneumonia in Clinical Pathology Laboratory, Bayer Veterinary Medical Research Institute. The results could be summarized as follows. The reaction of coagglutination between the reference antigens and the specific reagents of A pleuropneumoniae was strongly agglutinatied within 30 seconds without cross reaction. The 89 strains of A pleuropneumoniae were isolated from 360 cases of porcine pleuropneumonis and the biochemical properties of the isolates were same as the reference strains. The 89 isolated strains could be serotyped 39 strains as setotype 5, 34 strains as serotype 2, 8 strains as serotype 3, 2 strains as serotype 7 by coagglutination test, respectively. The clinical signs of pleuropneumonia were weakness, fever, anorexia, dyspnea and laboured breath in the later stages. The gross lesions of lung were haemorrhages, enlargement of interlobular septa, nodular formation and adhesion of the pleura.

• Korean Journal of Clinical Laboratory Science
• /
• v.44 no.3
• /
• pp.142-146
• /
• 2012

Hepatitis B surface antigen (HBsAg) seroclearance is a rare event in chronic hepatitis B virus (HBV) infection which acquires the disease early in life. A case study have examined with asymptomatic chronic hepatitis B carrier who exhibits HBsAg seroclearance in anti-HBe positive. We comprehensively studied the biochemical, virological and clinical aspects of a patient with HBsAg seroclearance. Liver biochemistry, serological markers, serum HBV DNA levels, and development of clinical complications were monitored. Mutation of hepatitis B virus is suspected serum HBsAg detected by the HBsAg assay systems of VITROS (OrthoClinical Diagnostics, USA), AxSYM (Abbott Laboratories, USA), Elecsys (Roche Diagnostics, Germany) and ADVIA Centaur (Bayer Diagnostics, USA). These four immunoassays showed negative results. Also, the patient had undetectable serum HBV DNA. Therefore, no mutation within the "a" determinant of HBsAg, which might escape detection from HBsAg immunoassay were found. Natural seroclearance was confirmed.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.6 no.4
• /
• pp.270-274
• /
• 2006

A color filter array (CFA) helps a single electrical image sensor to recognize color images. The Red-Green-Blue (RGB) Bayer CFA is commonly used, but the amount of the light which arrives at the photodiode is attenuated with this CFA. Red-White-Blue (RWB) CFA increases the amount of the light which arrives at photodiode by using White (W) pixels instead of Green (G) pixels. However, white pixels are saturated earlier than red and blue pixels. The pseudo multiple capture scheme and the corresponding RWB CFA were proposed to overcome the early saturation problem of W pixels. The prototype CMOS image sensor (CIS) was fabricated with $0.35-{\mu}m$ CMOS process. The proposed CIS solves the early saturation problem of W pixels and increases the dynamic range.

• Journal of the Korean earth science society
• /
• v.38 no.5
• /
• pp.323-332
• /
• 2017

The Digital Single Lens Reflex (DSLR) camera combined with a small aperture telescope is an efficient equipment for an astronomy-related lab exercise. This paper compares the different photometry softwares to provide insights on using the GUI-based photometry tool to the conventional command-line based photometry tool. The magnitude of the same point source measured within the aperture is consistent regardless of the software used although the background estimation, partial pixel treatment, and error estimation are slightly different. In a crowded field image where the aperture photometry is less reliable, the aperture photometry with varying aperture size is useful to see the qualitative trend for the magnitude. Due to the variation in ISO settings and the color dependence on the RGB Bayer system, an initial uncertainty of ~0.15mag is expected to be embedded in the magnitude derived from the DSLR images.

• 한국생물공학회:학술대회논문집
• /
• 2002.04a
• /
• pp.500-503
• /
• 2002

In order to improve the physical properties of food such as texture and food self-life. Transglutaminase(mTG) from Streptoverticillum morbarense was prepared. In the preliminary experiments, presence of proteases in the crude enzyme did not improve the texture of dough, which mean the inteference of mTG reaction by the proteases. Among the cation exchange resins tested for the removal of proteases, Monoplus S 100(Bayer, Germany) was the most efficient resin with 20 fold increase in the mTG/protease activity ratio. By further purification steps with a quaternary ammonia salt resin and a gel permeation chromatography, proteases were effectively removed from the preparation. Therefore, the improvement of flour texture was shown by adding the protease-free mTG.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.05a
• /
• pp.248-249
• /
• 2017

Red mud is an industrial by-product produced during the manufacturing aluminum hydroxide (Al(OH)₃) and aluminum oxide(Al₂O₃) from Bauxite ores. In Korea, approximately 2tons of red mud in a sludge form with 40~60% moisture content is produced when 1 ton of Al₂O₃ is produced through the Bayer process. An annual production of approximately 20tons are produced by company K, which is responsible for most of the domestic production. Therefore, in order to utilize Red Mud in the construction industry, this study evaluated the pore characteristics of ordinary portland cement mortar according to the red mud replacement ratio.