• 제목/요약/키워드: Battery Aging

검색결과 72건 처리시간 0.02초

누적 주행거리에 따른 플러그인 하이브리드 자동차의 연비 특성 연구 (Study on Fuel Economy Characteristics of Plug-In Hybrid Electric Vehicle by Cumulative Distance)

  • 박진성;임재혁;김기호;이정민
    • 한국수소및신에너지학회논문집
    • /
    • 제29권6호
    • /
    • pp.661-667
    • /
    • 2018
  • Electric vehicles are taken a long time to charge and are restricted driving where charging infrastructure was not sufficiently constructed. The vehicle developed to solve these problems is a plug-in hybrid vehicle. It is possible to drive a certain distance by using electric motor and when the battery runs out, it operate the engine. Plug-in hybrid vehicle have a complicated structure and a lot of parts comparing a general vehicle because the electric parts and the internal combustion engine are installed together. Therefore, as the aging (mileage) of the plug-in hybrid vehicle, the influence which change of fuel consumption is expected to be larger than a general vehicle, but an experimental data are lacking. In this paper, we cumulate a mileage of the plug-in hybrid vehicle about 15,000 km and measured the fuel economy when the cumulated distance reached within 160 km, 6,500 km, 15,000 km respectively, by using domestic public test method. For measuring fuel economy of the vehicle, CD mode (driving distance on a single charge) which use only motor and the CS mode which operate motor and combustion engine were measured respectively. As a result, the fuel economy slightly increased at cumulated mileage of 6,500 km compared to the 160 km and the fuel economy of 15,000 km was similar to 160 km.

한국형 기동헬기 APU 시동모터 결함원인 분석 및 신뢰성 개선 (Research on fault analysis and reliability improvement of APU start motor for Korea Utility Helicopter)

  • 강태우;염효원;이희랑;안종무
    • 한국산학기술학회논문지
    • /
    • 제18권6호
    • /
    • pp.703-709
    • /
    • 2017
  • 한국형 기동헬기(이하 수리온) 사업은 군이 운용중인 노후헬기를 국산헬기로 대체하기 위하여 연구개발한 사업으로 소요군의 전투력 향상과 운용, 유지 경제성을 고려한 사업이다. 수리온 보조동력장치는 주 발전기의 고장 시 장착 된 교류발전기로 체계에 비상 전원을 공급하는 장치이며 시동모터는 배터리의 전기적 에너지를 기계적 회전에너지로 변환 하여 보조동력장치 엔진을 회전시키는 장치이다. 수리온의 전력화 및 운용이 지속됨에 따라 시동모터의 결함이 발견되었고 이를 해소하기 위한 개선 활동을 진행하였다. 고장모드 분석에서는 결함발생에 대한 현상을 확인하고 결함원인을 5가지로 분류하였다. 5가지 인자에 대한 분석결과 결함의 주요 원인은 기계적 마모이며 이는 스프링 압력과 관련이 있다는 사실을 확인 하였다. 이론적으로 결정 된 압력조절을 통해 250회의 시험검증을 수행하였고 4개의 샘플링 마모량으로 회귀분석을 수행한 결과 모두 0.05이하의 유의수준을 보였기에 대립가설을 채택 하였다. 결론적으로 브러쉬 이상마모와 마모로 인한 파손은 압력조절을 통해 해결할 수 있었으며 시험을 통해 마모량 예측 및 결과 타당성을 확인 할 수 있었다.