• Proceedings of the KIEE Conference
• /
• 2001.07c
• /
• pp.1594-1596
• /
• 2001

The purpose of this paper is to provide the fundamental data which can be used for the design of pole transformers. For the purpose, electrical characteristics of aged mineral oil and silicone oil were analyzed by comparing with the results of virgin ones. For the experiment, an oil bath which can keep constant temperature was constructed to thermally deteriorate the specimens. And transformer materials were put together in the bath according to the their ratio in weight in the pole transformer. And the parameters such as relative permittivety, tan$\delta$ and specific resistance were measured. As a results, the permittivity of silicone oil was higher than that of mineral oil, and its decreasing rate with temperature was also higher. In addition, it was found that tan$\delta$ and specific resistance of virgin and aged oil began to differ at similar temperature.

• Journal of the Korean institute of surface engineering
• /
• v.37 no.1
• /
• pp.40-48
• /
• 2004

Hardness and internal stress are very important in nickel electroforming. Nickel sulfamate bath has been widely used in electroforming because of its low internal stress and moderate hardness. Nickel sulfamate bath without chloride was chosen to investigated the effect of plating variable such as temperature, PH, current density and sodium naphthalene trisulfonate as addition agent on the hardness and internal stress. It was found that hardness increased with increasing temperature and decreasing current density and ranged from 150∼310 DPH. The hardness was highest at $55^{\circ}C$ and 10∼40 mA/$\textrm{cm}^2$. The internal stress increased with increasing current density and decreasing temperature. It was minimum at PH 3.0∼3.8. Low internal stress within $\pm$1,500 psi was obtained at both $50^{\circ}C$ and $55^{\circ}C$ in 10-20 mA/$\textrm{cm}^2$. The addition of sodium naphthalene trisulfonate was found to be effective in refine columnar grains thus resulted in decreasing internal stress, increasing hardness and improving brightness.

• Science of Emotion and Sensibility
• /
• v.13 no.2
• /
• pp.309-316
• /
• 2010

This paper proposes healthcare bathing system for improving the multisensory function and not washing. We designed various types of bathtub for developing bathing system. This system consists of whirlpool bathtub for multisensory stimulation, a cover of bathtub with visual-auditory stimulation function, a small size PC for main control, touch panel, digital multimedia broadcasting (DMB), color-changeable LED mood lighting system for improving visual sensibility and speaker. We investigate the effects on autonomic nervous system during bathing with healthcare bathing system for improving the multisensory functions. To analysis physiological parameter, body temperature, blood pressure, intraocular pressure and heart rate variability (HRV) were measured before, during and after bath using healthcare bathing system. Experiments were performed on partial immersion bath and the water temperature was kept $39{\pm}0.5^{\circ}C$. The body temperature and the heart rate variability of the subject were measured every 5 minutes before, during, and after the bath. In analysis of HRV, the parasympathetic nerve increased from starting bath and decreased after 15 minutes. So the subjects felt comfortable at 15 minutes after starting bath. Blood pressure decreased to 16mmHg maximumly however pulse increased. Bath using healthcare bathing system for improving the multisensory functions affects positively the circulation of the blood. From this results, it leaves something to be desired in evaluation of serviceability and physiological analysis using the healthcare bathing system, however, we expect to analyze more clearly the relationship between the serviceability of product, physiological change and sensibility by various physiological parameters.

• Journal of the Korean Society of Physical Medicine
• /
• v.3 no.2
• /
• pp.97-102
• /
• 2008

Purpose : The purpose of this study was to find the effect of foot bath on blood pressure(BP) following treadmill exercise. Methode : Subject of study were forty healthy males without any cardiovascular, musculoskeletal, and neurologic diseases. Following twenty minutes walking at a speed of 5m/s on the treadmill, ten twenty subjects in experimental group received foot bath, on the dominant lower limb while sitting in chair. Foot bath was applied to the level of the lateral and medial malleoli keeping the temperature of the paraffin bath at $40{\pm}0.5^{\circ}C$. Twenty subjects in control group took a rest sitting in chair in a comfortable position. BP was measured in right brachial artery. BP was measured five times(before exercise, immediately after exercise, 5 minutes, 10 minutes, and fifteen minutes after exercise). Results : The study showed that for diastolic blood pressure, there was no significant difference between the experimental and the control group. However, systolic blood pressure(SBP) increased significantly after exercise compared with SBP before exercise (p<.05). In addition, SBP in five minutes after exercise decreased significantly compared with SBP in immediately after exercise (p<.05). On the other hand, the control group had significant difference between SBP measured before exercise and SBP measured at the other measure time (p<.05). In five minutes after exercise, SBP in experimental group had significant difference with SBP in control group (p<.05). Similarly, in ten and fifteen minutes after exercise, SBP in experimental group had significantly difference with SBP in control group (p<.05). Conclusion : Consequently it was confirmed that when foot bath was applied, the increased BP induced by the exercise returned to normal range rapidly.

• Proceedings of the KWS Conference
• /
• 1997.05a
• /
• pp.157-158
• /
• 1997

• Textile Coloration and Finishing
• /
• v.4 no.2
• /
• pp.76-83
• /
• 1992

Wool tropical and nylon taffeta were treated with low temperature plasma of $O_2$, $N_2$, NH$_3$, CF$_4$ and CH$_4$ for the intervals of 10 to 300 sec, and then dyed with leveling and milling type acid dyes in presence or absence of buffer solution. From the color depth of dyed fabrics, effect of plasma gases, treated time, dyeing time and temperature on dyeing property was studied. The results of the experiment can be summarized as follows: 1) The plasma treatments except methane gas increased the color depth of dyed wool fabrics, but not that of dyed nylon fabrics regardless of the plasma gases used. 2) The color depth of wool fabrics dyed in the dye bath without buffer solution was increased by the low temperature plasma, especially increased much more by CF$_4$ plasma treatment. It is found that with the identification of F- ion in the residual dye bath the hydrogen fluoride gas was adsorbed on wool fabrics in the plasma treatment. 3) The color depth of wool fabrics was increased with the time of $O_2$ and CF$_4$ plasma treatments. 4) In both cases of the leveling and milling type acid dyes, the rate of dyeing was increased in the low temperature plasma treatments, and it is found that the leveling type acid dye increased the color depth at relatively low temperature below 4$0^{\circ}C$, compared with the milling type acid dye.

• The Research Journal of the Costume Culture
• /
• v.22 no.3
• /
• pp.503-510
• /
• 2014

Nowdays, costumer's washing behavior were often times for remove to light-duty dirt. The purpose of this study is to provide the most effective washing conditions of detergent concentration and temperature conditions for help save energy and water resources required to the washing process. Washing conditions were as follows: 2 kinds of detergents and 4 types of artificially soiled fabrics were used. Detergent concentration was 0%, -10%, and -20% below the recommended conc. of manufacturer's standard. Temperature of bath was $20^{\circ}C$ and $40^{\circ}C$. The results of this study were as follows: First, washing performances of all kind of artificially soiled fabric improved as the temperature of bath at $40^{\circ}C$. Second, the test was conducted under the condition of decreasing respectively -10% and -20% below of the recommended concentration of manufacturer's standard detergent. The average of washing efficiency was not considerably affected by the reduction of 10% below of manufacturer's standard. Third, in case of the water temperature were $20^{\circ}C$, polyester/cotton blended fiber were higher degree of washing efficiency than cotton fiber.

• Child Health Nursing Research
• /
• v.18 no.4
• /
• pp.201-206
• /
• 2012

Purpose: In this study changes were observed in body temperature, heart rate and arterial oxygen saturation (SaO2) of newborns after bathing and to determine the effects of covering their heads with cotton hats after bathing. Methods: Participants were 58 newborn infants, 31 in the experimental group had their heads covered with cotton hats after their bath while 27 in the control group did not. Body temperature, arterial oxygen saturation and heart rate were measured at 8 consecutive times after bathing. Data were analyzed using t-test and repeated measures ANOVA. Results: Body temperature declined shortly after bathing. The experimental group showed faster recovery (p<.001). Heart rate increased after bathing in both groups. Heart rate in the experimental group decreased for 120 minutes and gradually increased to baseline (p<.001). In the control group, heart rate decreased for 180 minutes and then increased but did not reach the baseline (p<.001). Arterial oxygen saturation decreased shortly after bathing and recovery to the baseline was more rapid in the experimental group (30 minutes vs. 60 minutes) (p<.001). Conclusion: With significant changes observed in newborns' body temperature, arterial oxygen saturation and heart rate, covering the head right after bathing is effective in stabilizing infants' physiological system.

• YAKHAK HOEJI
• /
• v.39 no.4
• /
• pp.373-379
• /
• 1995

Coupling of tetracycline (Tc) to dithiocarbamate chitosan(DTCC) via chelate bond was carried out in the presence of Mg (II) ion by one- and two-bath process. In one-bath process, DTCC was treated with Mg(II)-Tc solution. In two-bath process, DTCC was treated with Mg(II) to produce DTCCMg(II), which was isolated and treated in turn with Tc solution. The effect of pH and temperature on binding of Tc, was investigated varying the pH of the solution from 2.6 to 3.2 at 10 and $30^{\circ}C$. Binding of Tc was not affected greatly by such variations in pH and temperature. Amount of Tc bound to 1 gm of matrix reached to 180 mg. Release of Tc from DTCC-Mg(II)-Tc was investigated by batch and flow method, and the amount of Tc released against time followed by flow method exhibited near linear relationship. DTCC-Mg(II)-Tc showed very prolonged antimicrobial activity compared to that of free Tc when it was tested against Escherichia coli TG-1 and Bacillus subtilis NA-1.

• Membrane and Water Treatment
• /
• v.5 no.2
• /
• pp.109-122
• /
• 2014

Polyvinylidene fluoride (PVDF) hollow fiber membrane is widely used for water treatment. However, the weak mechanical strength of PVDF limits its application. To enhance its tensile strength, a double-layer composite hollow fiber membrane, with PVDF and polyetherimide as the external and inner layers, respectively, was successfully prepared through phase inversion technique. The effects of additive content, air gap distance, N,N-dimethyl-acetamide content in the inner core liquid, and the temperature of external coagulation bath on the membrane structure, permeation flux, rejection, tensile strength, and porosity were determined. Experimental results showed that the optimum preparation conditions for the double-layer composite hollow fiber membrane were as follows: PEG-400 and PEG-600, 5 wt%; air gap distance, 10 cm; inner core liquid and the external coagulation bath should be water; and temperature of the external coagulation bath, 40 C. A single layer PVDF hollow fiber membrane (without PEI layer) was also prepared under optimum conditions. The double-layer composite membrane remarkably improved the tensile strength compared with the single-layer PVDF hollow fiber membrane. The permeation flux, rejection, and porosity were also slightly enhanced. High-tensile strength hollow fiber PVDF ultrafiltration membrane can be fabricated using the proposed technique.