• Journal of the Korean Ceramic Society
• /
• v.14 no.3
• /
• pp.163-168
• /
• 1977

As a wet chemical drying process "hot petroleum drying method" was applied and developed for preparing uniformly fine oxide powder with high purity and sinterreactivity. Using this method solution of sulfates was dried in hot petroleum bath (~17$0^{\circ}C$) to sulfate powder from which corresponding mullite doped by Fe3+ ion was formed. Particle size, shape, decomposition by heat, and phase identification of sulfate andoxide powders determined by DTA, TGA, X-ray diffraction, analysis and electron microscopy: sulfate powder prepared by this drying method is an intimate mixture of the amorphous form of uniformly and finely distributed spherical particles (0.05-0.1$\mu$). Mullitization with the sulfate powder occurs at 110$0^{\circ}C$ in air. The morphology of mullite particle made by firing the sulfate powder at 135$0^{\circ}C$ in oxygen atmosphere is granular of 0.1-0.3$\mu$ in size. This drying process proved to be a very effective method for preparing fine, homogeneous, and highly sinterreactive multicomponent oxide powder without conventional ceramic process of mixing, milling, and granulating. This process can be also applied for preparing electronic ceramic materials which are requisite for high purity and homogeneity.mogeneity.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.1 s.139
• /
• pp.149-156
• /
• 2005

The purpose of this study was to produce the high quality of electromagnetic wave shielding fabrics. In this study, we have produced polyester fabrics by electroless Ag plating. The untreated polyester was etched with $4\%$ NaOH solution added accelerant(Benzyl Dimethyl Dodecyl Ammonium Chloride) then it was catalyzed by $SnCl_2$ solution and activated by $PdCl_2$ solution. Electroless Ag plating was carried out by changing conditions such as temperature. time, weight loss rate of polyester and kind of reducing agents. The electromagnetic wave shielding effectiveness of polyester fabric by electroless Ag plating was measured by RF Impedance Analyzer and element of electromagnetic wave shielding substance was measured using Electron probe micro analyzer. The results were as follows; The plating bath using potassium sodium tartrate by reducing agent was excellent electromagnetic wave shielding effectiveness. Element of electromagnetic wave shielding substance was silver. Electromagnetic wave shielding effectiveness was shown over 64dB at the temperature of $40^{\circ}C$, treating time 30min., weight loss rate $20\%$.

• Journal of the Korean Applied Science and Technology
• /
• v.12 no.2
• /
• pp.51-58
• /
• 1995

To prepare a durable softening water repellent, quaternized octadecyl methacrylate-2-diethyl-aminoethyl methacrylate as a mother resin and quaternized 1, 3-dioctadecyl-2, 7-dioxy-6, 8-di(2-hydroxyethyl)-1, 3, 6, 8-tetraazacyclodecane which increase the softening effect and the hydrostatic pressure blended with waxes and their emulsifier in various proportions to give water repellent PADWC. As the results of the measurement of water repellency, washable, tear strength and crease recovery to polyestercotton(P/C) blended fabrics treated with PADWC only or addition of textile finishing resin, the physical properties were increased. There was no significant lowering effect in water repellency when PADWC was treated the antistatic agent by the one-bath method, and the effect of water repellency by the adding the catalyst was studied. PADWC was confirmed as durable water repellent with the results of making little difference of water repellency as ${\pm}5$ point after and before washing.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.222-225
• /
• 2009

In this paper, $TiO_2$ nanotube is prepared and the preparation is influenced by electrochemical etching rate and chemical dissolution rate. Especially, the chemical dissolution rate is lowered as the length $TiO_2$ nanotube increases. Titanium foil were anodized at various bias or current such as 20V, 55V and 0.1A (bath temperature $25^{\circ}C$) in organic electrolytes (ethylene glycol, glycerol) and then annealed at $450^{\circ}C$ and $650^{\circ}C$ to obtain the crystallized tubular $TiO_2$ on the Ti foil. Higher efficiency (89.1%) for the Cr(VI) reduction was obtained with the prepared sample compared to that (20.9%) with the sample in 0.5% HF electrolyte earlier studied.

• The Korean Journal of Pharmacology
• /
• v.16 no.1 s.26
• /
• pp.35-39
• /
• 1980

In this study, the effects of phenoxybenzamine and related drugs on the action of CCK-PZ and caerulein were examined in isolated gall bladder of guinea pig and higher esophagus strip of fowl. The strips were placed in a bath containing Locke-Ringer solution maintained at $38^{\circ}C$. Oxygen was continuously bubbled through the solution. The contractile response was measured isometrically by a force displacement transducer connected to polygraph. In isolated gall bladder preparation caerulein produced contractile response of CCK-PZ type, but the relative potency on a weight basis was 30 times stronger than CCK-PZ. The response of caerulein or CCK-PZ was not blocked by cholinergic blocking agent and both alpha and beta adrenergic blockades, however, the response of caerulein or CCK-PZ was exceptionally blocked by phenoxybenzamine. In isolated esophagus strip CCK-PZ with high concentration produced marked contraction which was not modified by atropine and other blocking agents, whereas the response was blocked by phenoxybenzamine. These results lead to the conclusion that phenoxybenzamine inherently inhibits the contractile response of CCK-PZ and caerulein on esophagus and other smooth muscle.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1575-1577
• /
• 2009

We have investigated the characteristics of transparent indium zinc oxide(IZO)/Ag/IZO multilayer electrode grown on polyethylene terephthalate (PET) substrates using a specially designed roll-to-roll sputtering system for use in flexible device are described. By the continuous R2R sputtering of the bottom IZO, Ag, and top IZO layers at room temperature, we were able to fabricate an IZO-Ag-IZO multilayer electrode with a sheet resistance of 6.15 ${\Omega}$/square, optical transmittance of 87.4 %, and figure of merit value of 42.03 10-3 ${\Omega}$-1. In addition, the IZO-Ag-IZO multilayer electrode exhibited superior flexibility to the RTR sputter grown single ITO electrode, due to the existence a ductile Ag layer between the IZO layers. This indicates that the RTR sputtered IZO-Ag-IZO multilayer is a promising flexible electrode that can substitute for the conventional single ITO electrode grown by bath type sputtering for use in low cost flexible device, due to its low resistance, high transparency, superior flexibility and fast preparation by the R2R process.

• Proceedings of the Membrane Society of Korea Conference
• /
• 2003.07a
• /
• pp.107-114
• /
• 2003

This study investigated the effect of 2-methoxy ethanol (2-Me) non-solvent as additive included in casting solution. Macroporous polymer membranes were prepared by using polyethersufone (PES)/N-methyl-2-pyrrolidone (NMP)/2-Me casting solution and water coagulant. The phase separation co-process of the vapor-induced phase separation (VIPS) and liquid-induced phase separation (LIPS) were used by means of membrane preparation method. The pore size and pore size distribution were controlled with additive (non-solvent), and measured with Automated Perm Porometer. By increasing additive (non-solvent) in the casting solution, the membranes produced changed from finger structure to sponge structure. That is due to the different diffusion rates. At slow diffusion process, sponge-like structure was formed and at fast diffusion process, finger-like structure was formed. Also relative humidity, evaporation time, temperature of casting solution and coagulation bath etc. had effects on the pore size distribution and the porosity of the membrane.

• Proceedings of the Korea Society of Environmental Biology Conference
• /
• 2003.11a
• /
• pp.86-91
• /
• 2003

In this study, in order to examine whether salt and heat shock stress would alter or not contraction and relaxation of isolated rat aorta. Under anesthesia with sodium pentobarbital(50 mg Kg$^{-1}$ i.p.), male Sprague Dawley rats weighing 300-330 g were subjected to 0, heat shock combined salt stress, where as the sham group was left at modified Krebs-bicarbonate solution. To measure contractile response of vascular ring preparation isolated from rat was determined in organ bath and was recorded on physiograph connected to isometric transducer. And the strip was checked for expression of heat shock protein(Hsps) by means of western blotting. The combination group of heat and 50 mM NaCl group increased vascular contractility, and the heat and 150 mM NaCl group decreased vascular contractility for 5 hours, and then recovered for 8 hours compared to that of control. Expressin of Hsp 70 of vascular muscle of rat aorta more increased by combination of heat and NaCl treatment than those of single treatment of heat or NaCl treatment, and vascular Hsp 70 showed a little decrease at 8 hours compared at 5 hours. These result indicate that mixed environmental stress either increased or decreased in vascular contractility by combination of heat and NaCl concentration.

• Journal of the Korean institute of surface engineering
• /
• v.49 no.1
• /
• pp.1-13
• /
• 2016

This review deals with one of the surface modification techniques, chemical conversion coating and particularly cerium-based conversion coatings (CeCC) as a promising substitute for chromium and phosphate conversion coating on magnesium and its alloys. The CeCCs are commonly considered environmentally friendly. The effects of surface preparation, coating thickness, bath composition, and e-paint on the corrosion behavior of CeCCs have been studied on the AZ31 magnesium alloy. This review also correlates the coating microstructural, morphological, and chemical characteristics with the processing parameters and corrosion protection. Results showed that the as-deposited coating system consists of a three layer structure (1) a nanocrystalline MgO transition layer in contact with the Mg substrate, (2) a nanocrystalline CeCC layer, and (3) an outer amorphous CeCC layer. The nanocrystalline CeCC layer thickness is a function of immersion time and cerium salt used. The overall corrosion protection was crucially dependent on the presence of coating defects. The corrosion resistance of AZ31 magnesium alloy was better for thinner CeCCs, which can be explained by the presence of fewer and smaller cracks. On the other hand, maximum corrosion protection was achieved when AZ31 magnesium samples with thin CeCCs are e-painted. The e-paint layer further restricts and hinders the movement of chloride and other aggressive ions present in the environment from reaching the magnesium surface.

• Nuclear Engineering and Technology
• /
• v.9 no.1
• /
• pp.1-6
• /
• 1977

Monoiodobromosulfophthalein-$^{131}$ I (MIBSP-$^{131}$ I), one of the useful radiopharmaceuticals for liver function studies, has been prepared by a simple isotope exchange between the MIBSP and the molecular iodine-$^{131}$ I in phosphate buffer, pH 5.3. The pooled cold MIBSP was prepared by a normal iodination of BSP using iodine monochloride, and separated from the iodination mixture by applying a Sephadex LH-20 chromatography. At 10$0^{\circ}C$, the exchange rate was so fast that the reaction could be terminated in 5 min to show upto 95% yield. The final product could be obtained simply by further heating for about 5 min in a boiling water bath in the presence of a small amount of hydrogen peroxide, and subsequent pH adjustment and membrane filtration.