• The Journal of Pediatrics of Korean Medicine
• /
• v.25 no.2
• /
• pp.102-110
• /
• 2011

Objectives: The purpose of this study is to analyze the baby bath preparation and provide necessary information on the upcoming herbal bath preparation for atopic dermatitis. Methods: We selected 113 baby bath preparation by searching typing in "baby bath preparation" in 6 major web-search-engines, and 17 web shopping malls in Korea. 11 items were evaluated under three criteria : type of product, function and ingredient of goods. Results: Result showed that the most common type of bath preparation were liquid type. 96% of the products contained medical agents. Ingredients of the medical agents were herbal medicine, aroma oil, spring and sea ingredients, vitamin and extract. 33% of the products were bath preparation for the atopic dermatitis and 74% of the products were only for the baby. Conclusions: It is necessary to make a government level guideline for natural materials used in bath preparation, and to develop new products contained herbal medicine abide by oriental medical theory.

• Membrane and Water Treatment
• /
• v.13 no.3
• /
• pp.139-145
• /
• 2022

Development in advanced separation processes leads to the significant advancement in polymeric membrane preparation methodology. Therefore, present research investigated the preparation and characterization of cellulose acetate membrane by phase inversion separation method to determine optimized operating parameters. Prepared CA membrane's performance was been analyzed in terms of % rejection and flux. Investigation was conducted to study effect of different parameters such as polymer concentration, evaporation rate, thickness of film, coagulation bath properties, temperature of polymer solution and of the coagulation bath etc. CA membrane was fabricated by taking polymer concentration 10wt% and 11wt% with zero second evaporation time and varying film thickness over non-woven polyester fabric. Effect of coagulation bath temperature (CBT) and casting solution temperature were also been studied. The experimental results from SEM showed that the surface morphology had been changed with polymer r concentration, coagulation bath and casting solution temperature, etc. Lower polymer concentration leads to lower precipitation time giving porous membrane. The prepared membrane was tested for advanced waste water treatment of relevant effluent stream in pilot plant to study flux and rejection behavior of the membrane.

• Transactions of the Korean hydrogen and new energy society
• /
• v.3 no.2
• /
• pp.9-15
• /
• 1992

Electroless copper plating method using an alkaline bath have been employed in copper coating of the (LM)Ni4.5Co0.1MnO.2A10.2 hydrogen storage alloy powders for electrode preparation. The plating were conducted without any pretreatment of alloy powders. For the preparation of the electrodes, about 0.12g of the copper coated alloy powder (copper to alloy ratio 1/3 by weight) was compacted with pressure of 6 tons/cm2 at room temperature. The disk-type compacts had a diameter of 10mm and thickness of about 0.24mm. The electrode characteristics were examined through SEM observations and electrochemical measurements in a half cell. The electrochemical measurement showed that the maximum discharge capacity of the electrodes prepared by using alkaline bath were 245mAh per gram of coated alloy (327mAh per gram of alloy) and appeared a considerable degradation with increasing number of cycles. The decrease of the discharge capacity after 100 cycles was about 30% It can be suggested that, with a slight of improvement, this electroless copper plating method could be applied to the preparation of the rare earth-nickel based alloy electrode.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.7
• /
• pp.1111-1120
• /
• 2013

Zizania latifola has used for folk medicine in Korea. It is effective in treating skin trouble and sensitivity skins. The purpose of this study was to develop high valuable types of bath preparation of Zizania latifolia. The natural materials were manufactured by the mixed ratio of Zizania latifolia. Product was manufactured by the mixed ratio of Zizania latifolia and 3 natural materials. Green tea was highest in sensory evaluation as similar with Zizania latifolia. optimum condition of mixed ratio was adaptive 50% Houttuynia cordata, 30% green tea with 20% Artemisia vularis. Product's sensory evaluation was showed best in mixing 40% and Zizania latifolia extract 60%. There were optimal condition for manufacturing of cleansing. Therefore, The development of a bath preparation used by Zizania latifolia is very useful for manufacturing cleansing. We suggest that it help for improve skin trouble and make healthy skin.

• Applied Microscopy
• /
• v.28 no.3
• /
• pp.315-328
• /
• 1998

The present study was carried out to investigate the effect of ultrasonic bath in tissue preparation for transmission electron microscopy. The method used standard reagents and media, and employed ultrasonic bath agitation to accelerate fluid exchange. The liver kidney, stomach and cardiac muscle tissues of male Sprague-Dawley rats were used for the experiment, and the experimental design was divided into 4 groups; The control group using rotators (Traditional method, 1,625 mins) and the three experimental groups using ultrasonic bath (UB) in the primary fixation through the infiltration processes (UB I; 62.5 mins, UB II; 125 mins, UB III; 250 mins). The results were as follows; 1. In the control group, tissues were easily sectioned, and showed well preserved intact membranes, and cell organelles such as mitochondria, lysosome, peroxisome, rough endoplasmic reticulum and smooth endoplasmic reticulum. 2. In the UB treated group I, tissues showed holes due to the inadequate removal of both water and fluids used in the dehydration process. Also the mitochondria of cell organelles, especially, showed swollen intracristal spaces and dense matrices due to poor fixation. 3. In the UB treated group II, tissues showed good preservation of cell organelles and specimen slice sections. Also, no holes were observed. 4. In the UB treated group III, tissues showed leaching of structural components in the cytoplasm, but no holes were observed. In conclusion, the ultrasonic bath procedure takes approximately 120 minutes from specimen fixation to resin infiltration and gives excellent results.

• Journal of the Korean institute of surface engineering
• /
• v.29 no.6
• /
• pp.709-713
• /
• 1996

Mechanical solderless chip packaging with small gold bumps or metal balls has increased in the electronic devices. The preparation of conductive particles (5~7 $\mu\textrm{m}$ diamiter) by electroless nickel plating have been investigated. Generally, batch type electroless plating is applied to provide conductivity on the nonconductors. Since the surface areas of particles are much larger than the bulk substrate, accordingly the electroless plating bath becomes unstable. Thus, we applied the continuous dropping method for the preparation of conductive particles. The uniform coverage of deposited nickel on the particles was obtained by using ammonium acetate as a complexing agent, and surface coverage is further improved without coagulation of particles by the surface active agent treatment before enter the plating bath.

• The Korean Journal of Physiology
• /
• v.1 no.1
• /
• pp.67-72
• /
• 1967

Present paper is attempted to introduce the phenomenon of 'after contraction' in isolated cardiac-muscle. Papillary muscles were removed from cat right ventricle and were used as a preparation. The muscle strip was Placed in tissue bath which is kept in steady temperature of around $25^{\circ}C$ and was perfuced by Tyrode solution, saturated with 95% $O_2$ and 5% $CO_2.$ under the condition of high calcium (8.2-10.0 mM/l), low sodium (72.4-70.0 mM/l) perfusion with the administration of epinephrine (1-2 mg/l) into tile tissue bath normally triggered muscle contraction was followed by oscillatory, repetitive contractions - after contraction. The phenomenon of after contraction was augumented by decrease in tissue bath temperature and by increase in number of preceding beats and in driving rate. Authors were able to maintain the phenomenon in prominent and steady state giving proper experimental conditions such as fixed bath temperature (ranged from $22^{\circ}C\;to\;27^{\circ}C$), suitable driving rate (20 per minute in average) and perfusion of high calcium, loll sodium and 1-2 mg/l of epinephrine. In some preparations, the strength of after contraction (second contraction) reached up-to 80% of normally triggered contraction and five repetitive contractions were observed as largest number of after contractions. Intracellular action potential measured in the muscle which was beating regulary showing steady after contraction revealed no oscillating after potential in most parts of the muscle but in few cases oscillating changes of after potentials were detectable. In electrogram of the muscle preparation recorded by means of contact electrode prominent, oscillating after potentials were observable when the recorder was set at highest sensitivity. It still is not clear that whether after contraction is the phenomenon which corresponds to those changes in action potential, oscillating after potential, of the muscle preparation. Possible mechanism of the phenomenon of after contraction relating with after potential changes was proposed. Detailed results obtained from further studies on after contraction and concrete discussion on the phenomenon will be reported by authors.

• Membrane and Water Treatment
• /
• v.5 no.2
• /
• pp.109-122
• /
• 2014

Polyvinylidene fluoride (PVDF) hollow fiber membrane is widely used for water treatment. However, the weak mechanical strength of PVDF limits its application. To enhance its tensile strength, a double-layer composite hollow fiber membrane, with PVDF and polyetherimide as the external and inner layers, respectively, was successfully prepared through phase inversion technique. The effects of additive content, air gap distance, N,N-dimethyl-acetamide content in the inner core liquid, and the temperature of external coagulation bath on the membrane structure, permeation flux, rejection, tensile strength, and porosity were determined. Experimental results showed that the optimum preparation conditions for the double-layer composite hollow fiber membrane were as follows: PEG-400 and PEG-600, 5 wt%; air gap distance, 10 cm; inner core liquid and the external coagulation bath should be water; and temperature of the external coagulation bath, 40 C. A single layer PVDF hollow fiber membrane (without PEI layer) was also prepared under optimum conditions. The double-layer composite membrane remarkably improved the tensile strength compared with the single-layer PVDF hollow fiber membrane. The permeation flux, rejection, and porosity were also slightly enhanced. High-tensile strength hollow fiber PVDF ultrafiltration membrane can be fabricated using the proposed technique.

• Journal of the Korean Ceramic Society
• /
• v.34 no.6
• /
• pp.611-619
• /
• 1997

Optimal Mullite sol was synthesized by sol-gel process using Aluminium sec-butoxide(ASB), Tetraethoxysilane(TEOS) and then, Mullite films were dip-coated with various holding time in sol bath and heat-treated at 130$0^{\circ}C$ above for crystallization. The thickness of coated film increased linearly with holding time in sol bath and average pore size was controllable within 20~30$\AA$.

• Journal of the Korean institute of surface engineering
• /
• v.47 no.5
• /
• pp.269-274
• /
• 2014

Electroless plating process as a solution deposition method is a viable means of preparing conductive metal films on non-conducting substrates through chemical reactions. In the present study, the preparation and properties of electroless Ni-plating on flexible silicone rubber are described. The process has been performed using a conventional Ni(P) chemical bath. Additives and complexing agents such as ammonium chloride and glycine were added and the reaction pH was controlled by NaOH aqueous solution. Ni deposition rate and crystallinity have been found to vary with pH and temperature of the plating bath. It was shown that Ni-films having the high crystallinity, enhanced adhesion and optimum electric conductivity were formed uniformly on silicone rubber substrates under pH 7 at $70^{\circ}C$. The conductive Ni-plated silicone rubber showed a high electromagnetic interference shielding effect in the 400 MHz-1 GHz range.