• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2009년도 추계학술대회
• /
• pp.953-955
• /
• 2009

본 논문에서는 두 개의 선형 MLCA(Maximum Length Cellular Automata)을 이용한 영상 암호화 방법을 제안한다. 암호화 방법은 먼저 8 비트 초기 값을 임의로 설정한다. 그 다음, 설정된 초기 값을 이용하여 행과 열을 단계적으로 변화시켜 고품질의 PN(pseudo noise) 수열을 생성한다. 생성된 수열을 이용하여 기저영상을 생성한다. 마지막으로 기저영상을 원 영상과 XOR 연산함으로서 암호화 수준이 높은 결과 영상을 얻는다. 히스토그램 및 안정성 분석을 통하여 제안한 방법이 높은 암호화 수준의 성질을 가졌음을 검증한다.

• 지질공학
• /
• 제19권3호
• /
• pp.351-363
• /
• 2009

경상분지 내 구미노두와 다사노두 지역에서 신동층군의 사암층을 대상으로 절리 연구가 집중적으로 이루어졌다. 사암-이암 시퀀스의 양 지역 노두에서 똑같이 두 조의 직교 절리가 사암층에 전형적으로 발달하고 있다. 여러 가지 절리 자료들을 양 지역의 동일한 두께의 층에서 비교하여보면 상당히 유사한데 이는 절리 조들이 동일한 응력장에서 신장 변형 작용으로 균질하게 생성되었음을 이야기 한다. 대부분의 절리들은 퇴적물이 매몰되어 고화되는 과정에서 수압단열작용에 의해 생성된 것으로 생각되며, 사암층의 층 경계에 수직이고 층 경계에 이르러 중지한다. 두 조의 직교하는 절리들은 단열 격자차단 양상으로 해석되는 상호 접경하는 관계로 볼 때 ${\sigma}_1$은 수직으로 고정된 상태에서 ${\sigma}_2$ 와 ${\sigma}_3$의 빠른 교환에 의해 거의 동시에 생성된 것으로 판단된다. 사암층에서의 절리조들은 인접한 절리 간에 평행한 배향을 가지며 규칙적인 간격을 가지고 절리면은 평탄하다. 절리간격은 층 두께에 비례하고 간격분포는 대부분의 층에서 대수-정규분포 내지 정규 분포를 나타낸다. 그러나 다중층에서는 간격의 분포범위가 크고 불규칙한 형태를 보여준다. 연구지역에서 두 조의 절리들은 최빈값/평균값의 비가 1 내외로 포화상태를, 또 다른 척도인 변동계수(Cv)도 1이하의 낮은 값으로 포화를 지시한다. 절리의 개구는 모든 사암충의 절리에서 균질하기보다는 절리의 길이가 증가함에 따라 증가하는 경향을 갖는다.

• 한국지구과학회지
• /
• 제23권4호
• /
• pp.349-356
• /
• 2002

한반도 동해에서 Topex/Poseidon위성 고도레이더로부터 관측된 해수면과 울릉도, 포항, 속초의 조위계에서 관측된 해수면을 비교하여 두 자료의 연계성을 분석하고 위성에서 관측된 해수면자료의 객관성을 검증하였다. 1992년부터 1997년 사이에 관측된 T/P MGDR 관측자료로부터 해수면을 추출하기 위하여 대기보정 및 지구물리학적인 보정을 실시하였다. 조위계로부터 관측된 해수면과의 비교를 위해 조위관측소로부터 반경 약 55km내에 위치하는 관측값들을 평균하였다. 위성 해수면과 조위계 해수면을 비교한 결과 내해역에 위치한 포항 및 속초가 외해역에 위치한 울릉도에비해서 낮은 연관성을 보였다. 200일을 기준으로 저역통과필터를 처리했을 때 외해역에 위치한 울릉도는 상관값이 0.91로 매우 높은 유의성을 보였고, 내해역에 위치한 포항 및 속초는 각각 0.58 및 0.65로서 울릉도에 비해서 상대적으로 낮은 유의성을 보였다. 이러한 큰 차이는 M2, S2, K1 분조 등에 의한 조석변형 때문에 발생하는 현상으로 볼 수 있고, 이는 주로 T/P 자료처리에 사용된 조석모델의 오차로 볼 수 있고, 이를 저역통과필터를 적용하여 효과적으로 제거하였다. 대체로 외해역의 경우는 60, 120, 180, 200일의 필터를 순차적으로 처리함에 따라 상호 두 자료간의 유의성이 점차적으로 개선되는 것을 확인할 수 있었으나 내해역의 경우에는 거의 유의성이 개선되지 않는 것으로 확인되었다.

• Bulletin of the Korean Chemical Society
• /
• 제35권5호
• /
• pp.1422-1432
• /
• 2014

Convergent all-electron multi-reference configuration-interaction (MRCI) calculations are performed for a lithium dimer with Kaufmann's Rydberg basis functions. A comparison of the results of these calculations with those of the effective core potential/core polarization potential (ECP/CPP) method and experimental data reveals the deficiency of the all-electron ab initio method. The deficiency is related to the mere 51.9% attainment of electron correlation for the ground state. The percent attainment of electron correlation for the first excited state is slightly better than that for the ground state, preventing us from obtaining better agreements with experimental data by means of increasing the size of basis sets. The Kaufmann basis functions are then used with the ECP/CPP method to obtain the accurate convergent potential energy curves for the $^1\prod_u$ states correlated to Li(2p) + Li(2p) and Li(2s) + Li(n = 2, 3, 4). Quantum defect curves (QDCs) calculated for both the $X^2\sum_g$ and 1 $^2\prod_u$ states of the $Li{_2}^+$ ion and the Lu-Fano plot reveal a strong series-series interaction between the two $2snp{\pi}$ and $2pnp{\pi}$ Rydberg series. The QDCs are then used to resolve assignment problems in the literature. The reassignments, performed by Jedrzejewski-Szemek et al., of the dissociation product of the D $^1\prod$ state from (2s+3d) to (2s+3p) and that of the 6 $^1\prod_u$ from (2s+4d) to (2s+4p) are found to be incorrect. It may be more natural to assign their $2snp{\pi}$ Rydberg series as a $2snd{\pi}$ series. The state, assigned as 5p $^1\prod_u$ by Ross et al. and 4d $^1\prod$ by Jedrzejewski-Szemek et al., is assigned as the 7 $^1\prod_u$ state, correlated to the Li(2s) + Li(4f) limit.

• 대한한의진단학회지
• /
• 제19권3호
• /
• pp.141-149
• /
• 2015

Objectives Recently the fuzzy logic is widely used in the decision making, identification, pattern recognition, optimization in various fields. In this study, we propose the fuzzy logic as the objective method of distinguishing hot and cold, the basis of diagnosis in Korean medicine. Methods We developed fuzzy inference system to distinguish whether the subjects had hot or cold. The cold and hot questionnaire of Korean traditional university textbook, the pulse rate and the DITI value of face used in the system. These three kinds of information were defined as 'fuzzy sets,' and 54 fuzzy rules were established on the basis of clinical practitioners' knowledge. The fuzzy inference was performed by using the Mamdani's method. To evaluate the usefulness of the fuzzy inference system, 200 cases of data measured in the Woosuk university hospital of oriental medicine were used to compare the determining hot, normal, cold results obtained from the experts and from the proposed system. Results As a result, 100 cases of "cold", 54 cases of "normal", and 34 cases of "hot" were matched between the experts and the proposed system. This fuzzy system showed the conformity degree of 94%(${\kappa}=0.853$). Conclusions In this study, we could express the process of distinguishing hot-cold using the fuzzy logic for objectification and quantification of hot-cold identification. This is the first study that introduce a fuzzy logic for distinguish pattern identification. The degree of the heat characteristic of the patients inferred by this system could provide a more objective basis for diagnosing the hot-cold of patients.

• 한국전산응용수학회:학술대회논문집
• /
• 한국전산응용수학회 2003년도 KSCAM 학술발표회 프로그램 및 초록집
• /
• pp.1-1
• /
• 2003

In this talk, a reduced-order modeling methodology based on centroidal Voronoi tessellations (CVT's)is introduced. CVT's are special Voronoi tessellations for which the generators of the Voronoi diagram are also the centers of mass (means) of the corresponding Voronoi cells. The discrete data sets, CVT's are closely related to the h-means clustering techniques. Even with the use of good mesh generators, discretization schemes, and solution algorithms, the computational simulation of complex, turbulent, or chaotic systems still remains a formidable endeavor. For example, typical finite element codes may require many thousands of degrees of freedom for the accurate simulation of fluid flows. The situation is even worse for optimization problems for which multiple solutions of the complex state system are usually required or in feedback control problems for which real-time solutions of the complex state system are needed. There hava been many studies devoted to the development, testing, and use of reduced-order models for complex systems such as unsteady fluid flows. The types of reduced-ordered models that we study are those attempt to determine accurate approximate solutions of a complex system using very few degrees of freedom. To do so, such models have to use basis functions that are in some way intimately connected to the problem being approximated. Once a very low-dimensional reduced basis has been determined, one can employ it to solve the complex system by applying, e.g., a Galerkin method. In general, reduced bases are globally supported so that the discrete systems are dense; however, if the reduced basis is of very low dimension, one does not care about the lack of sparsity in the discrete system. A discussion of reduced-ordering modeling for complex systems such as fluid flows is given to provide a context for the application of reduced-order bases. Then, detailed descriptions of CVT-based reduced-order bases and how they can be constructed of complex systems are given. Subsequently, some concrete incompressible flow examples are used to illustrate the construction and use of CVT-based reduced-order bases. The CVT-based reduced-order modeling methodology is shown to be effective for these examples and is also shown to be inexpensive to apply compared to other reduced-order methods.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1519-1519
• /
• 2001

The aim of this work was to test the feasibility of NIRS in analysing textural characteristics of “Pasta Filata” cheese during the shelf-life. For this purpose, 128 samples of “Pasta Filata” cheese, subdivided into two sets on the basis of the wax used to avoid mechanical damages (paraffin, biodegradable wax), were analysed by using an InfraAlyzer 500 (Bran+Luebbe). Analyses were performed at room temperature. Samples were cut into small cylinders (D=3.2 cm, height = 1 cm), in agreement with literature information. Data were processed by using Sesame Software (Bran+Luebbe). Samples were analysed, during the shelf-life, at 90 and 120 days. In parallel, textural characteristics were detected carrying out a compression method by using an Universal Testing Machine Instron model 4301 (Instron Corporation, Canton, Massachusetts). As compression probe was used a cylinder (D = 5.8 cm, height = 3.7 cm) and a speed rate of 20mm/min was applied. The load at 20 mm of compression was recorded on sample cylinders of 1.7 cm (D) by 2 cm (height). Qualitative analysis of full spectra showed the possibility to gather samples on the basis of the days of shelf-life. The textural characteristics of cheese during the shelf-life was evaluated by comparing NIRS data with rheological results. The best correlation was obtained applying MLR to the first derivative of normalized absorbance values at seven wavelengths. Load values were plotted against the NIR prediction values based on first derivatives. NIRS proved to be an useful tool in classifying samples on the basis of the shelf-life period as well as in predicting their textural characteristics ($R^2$= 0.916, SEC = 0.192, SEP = 0.248, SEV = 0.345).

• 한국지진공학회논문집
• /
• 제23권2호
• /
• pp.89-99
• /
• 2019

In order to increase the seismic safety of nuclear power plant (NPP) structures, a technique to reduce the seismic load transmitted to the NPP structure by using a seismic isolation device such as a lead-rubber bearing has recently been actively researched. In seismic design of NPP structures, three directional (two horizontal and one vertical directions) artificial synthetic earthquakes (G0 group) corresponding to the standard design spectrum are generally used. In this study, seismic analysis was performed by using three directional artificial synthetic earthquakes (M0 group) corresponding to the maximum-minimum spectrum reflecting uncertainty of incident direction of earthquake load. The design basis earthquake (DBE) and the beyond design basis earthquakes (BDBEs are equal to 150%, 167%, and 200% DBE) of G0 and M0 earthquake groups were respectively generated for 30 sets and used for the seismic analysis. The purpose of this study is to compare seismic responses and seismic fragility curves of seismically isolated NPP structures subjected to DBE and BDBE. From the seismic fragility curves, the probability of failure of the seismic isolation system when the peak ground acceleration (PGA) is 0.5 g is about 5% for the M0 earthquake group and about 3% for the G0 earthquake group.

• 영어어문교육
• /
• 제6호
• /
• pp.159-178
• /
• 2000

In systemic grammar an English clause is analysed simultaneously from the point view of its ideational function, interpersonal function and textual function. This study deals with only the ideational function of the three functions, which accounts for the underlying content of a clause. Transitivity is the subsystem of the ideational function. It specifies the different types of process that are recongnized in the language and the structures by which they are expressed. The purpose of the paper is to describe the transitivity of English clause on the basis of systemic approach. For this we analyzed the three subsystems of transitivity which are physical process, mental process and relational process in the form of features. And we described the sets of the features of the three different types of process in English clause in the framework of the system network.

• 경영과정보연구
• /
• 제12권
• /
• pp.181-201
• /
• 2003

An employee employment of Enterprise must consider efficiency, balance attribute and effectiveness as important variable. but Our country's Enterprise reduce the personnel without basic guide line about employee employment. because Our country's Enterprise thinks of personnel expenses or sales amount decrease as important variable. Therefore, Research background sets out that there is no basic guideline for employment management one of the most important elements in Enterprise administration. and I examined employment control's concept and concept about softness of labor market in theoretical background setting. Also, was abreast of employment control effect, case study and literature research about employment control's basis. Finally, In fluctuation change of Enterprise's employee number, I examined which relation is formed in comparison with sales amount, net profit and the employee number of individual Enterprise using investment analysis material of Stock Company focused on Enterprise that stock is listed on the stock exchange.