• Fashion & Textile Research Journal
• /
• v.17 no.2
• /
• pp.265-277
• /
• 2015

The aim of this study was to successfully reflect human body changes on the transformation of the virtual body within 3D virtual fitting spaces. For this purpose, existing problems of shape transformation of the virtual body were analyzed and regression equations which provides useful basic data for transformation of the virtual body that can be applied usefully to the 3D virtual fitting system was developed. Necessary data for the analyses were body measurement and 3D scan data of women with average physical form between the ages of 40 through 49. The reason that we used human body changes of the female subjects in their forties was based on the recognition that fundamental female body changes start to occur from age of forty. Body shapes were largely divided into 3 groups according to obesity which was found to be the biggest factor of shape change. Seven factors were extracted based on factor analysis of 47 body measurement categories and regression equations were created to extract specific measurements for each BMI group based on these seven factors. The major contribution of this paper can be summarized as follows. First, the regression equations to extract specific measurements based on the 7 representative variables remediated existing problem of virtual bodies as it increased the number of body shape transformation areas. Second, the regression equations helped to overcome the problem of current failing to reflecting changes in body cross-section shape based on simple girth measurements based on analysis of cross-section distances.

• Structural Engineering and Mechanics
• /
• v.44 no.6
• /
• pp.775-799
• /
• 2012

This work approaches the structural performance of masonry arches that have a small ratio between number of vossoirs and span length. The aim of this research is to compare and validate three different methods of analysis (funicular limit analysis F.L.A., kinematic limit analysis K.L.A. and plane stress Finite Element Analysis F.E.A.) with an experimental campaign. 18 failure tests with arches of different shapes and boundary conditions have been performed. The basic failure mechanism was the formation of enough hinges in the geometry. Nevertheless, in few cases, sliding between vossoirs also played a relevant influence. Moreover, few arches didn't reach the collapse. The FLA and KLA didn't find a solution close to the experimental values for some of the tests. The low number of vossoirs and joints become a drawback for an agreement between kinematic mechanism, equilibrium of forces and geometry constraints. FLA finds a lower bound whereas KLA finds an upper bound of the ultimate load of the arch. FEA is the most reliable and robust method and it can reproduce most of the mechanism and ultimate loads. However, special care is required in the definition of boundary conditions for FEA analysis. Scientific justification of the more suitability of numerical methods in front of classic methods at calculating arches with a few vossoirs is the main original contribution of the paper.

• Structural Engineering and Mechanics
• /
• v.75 no.6
• /
• pp.747-769
• /
• 2020

This paper provides a semi-analytical approach to investigate the variations of 3D displacement components, electric potential, stresses, electric displacements and transverse vibration frequencies in laminated piezoelectric composite plates based on the scaled boundary finite element method (SBFEM) and the precise integration algorithm (PIA). The proposed approach can analyze the static and dynamic responses of multilayered piezoelectric plates with any number of laminae, various geometrical shapes, boundary conditions, thickness-to-length ratios and stacking sequences. Only a longitudinal surface of the plate is discretized into 2D elements, which helps to improve the computational efficiency. Comparing with plate theories and other numerical methods, only three displacement components and the electric potential are set as the basic unknown variables and can be represented analytically through the transverse direction. The whole derivation is built upon the three dimensional key equations of elasticity for the piezoelectric materials and no assumptions on the plate kinematics have been taken. By virtue of the equilibrium equations, the constitutive relations and the introduced set of scaled boundary coordinates, three-dimensional governing partial differential equations are converted into the second order ordinary differential matrix equation. Furthermore, aided by the introduced internal nodal force, a first order ordinary differential equation is obtained with its general solution in the form of a matrix exponent. To further improve the accuracy of the matrix exponent in the SBFEM, the PIA is employed to make sure any desired accuracy of the mechanical and electric variables. By virtue of the kinetic energy technique, the global mass matrix of the composite plates constituted by piezoelectric laminae is constructed for the first time based on the SBFEM. Finally, comparisons with the exact solutions and available results are made to confirm the accuracy and effectiveness of the developed methodology. What's more, the effect of boundary conditions, thickness-to-length ratios and stacking sequences of laminae on the distributions of natural frequencies, mechanical and electric fields in laminated piezoelectric composite plates is evaluated.

• The Research Journal of the Costume Culture
• /
• v.12 no.4
• /
• pp.663-675
• /
• 2004

The plastic arts is used when designers draw inspirations to create fashion design. The author referred to fashion magazines for designing ideas of Mondrian＇s geometrical abstract painting in practical applications used by designers in Paris, Italy, London and New York during the 10-year period(1991-2000). The collections of data were analyzed as following: ◇ Fashion Designing Idea 1. Matching Idea The art is reproduced in the design as how it is with no transformation. First, the painting＇s complete figure is reproduced on the entire or parts of clothing. Second, the painting＇s partial figure is reproduced on the entire or parts of clothing. 2. Contrasting Ideas The composition elements in Mondrian＇s geometrical abstract painting, for example, structures of shapes, vertical and horizontal lines and different colors are applied in the design. First, one particular shape in painting is transformed into different shape of square, circle or triangle and reproduced in designing. Second, one particular shape in painting is disassembled and then reshaped into different form in reproduction. Third, additional lines are put in to create different look from the original painting. Forth, existing lines are extended over the boundary to create different look from the original painting. Fifth, achromatic colors: black and white, and three basic colors: red, blue and yellow in the original painting are modified into different shades or color scheme is increased in broad range.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.13 no.1
• /
• pp.253-266
• /
• 2000

In order to strengthen objectivity and availability of oriental herb medicine, the standard formula for herbs has been attempted to set up by experimenting and documentary testing original herbs which were recorded in authorized document. The object herb medicine is Codonopsis Pilosulae Radix. The internal and external morphological standard in this study is expected to supply the search for several physiochemical reaction, biological reaction, determination of indicator material and identification of gene with basic sources in the future. The result of study is as follows; In the external shape, it was possible that herbs were distinguished according to artificial classification and that same genus-degree of relatedness among herbs could be distinguished by more precise and active observation. In the shape of real herbs, I compared current herbs in market with original herbs which were just collected or were on the course of drying. In addition, it was possible that the internal shape could be identified by using microscope after butanol series. In powder herbs, it was possible to purify the shape by microscope through maceration of natural and powder herbs. Though it was impossible to make distinction of herbs which are not current in my search contents, this search contents will be a standard for alpplying herbs in the future. Despite such a useful character, it was difficult to deal with power herbs because it was uncertain to make a standard for them on account of the crush of these tissue. Since powders shape of herbs in a few documents were regard not as the powder shapes of natural herbs but as the maceration state of them. It is suggested that we should inspect the original herbs which are not crushed yet with a microscope in order to identify crushed shape of powder herbs from now on. An Additional standard establishment including physiochemical reaction and gene research is required in order to supplement the fault of this search. As for the supplement about this search, considering that many kinds of same genus-degree of relatedness are being current now, it is necessary that each herb should he collected only after identifying and that the succeeding search of each herb should be proceeded for the regular establishment of internal and external standard.

• Korean Journal of Human Ecology
• /
• v.3 no.1
• /
• pp.1-14
• /
• 2000

This paper is on the Kasaya that reveals conspicuously the religious meaning among the Korean Buddhist costumes. The Kasaya has the most special meaning among Korean costume culture. It has the most important historical value, for Buddhism is the oldest religion that begins at 4th century A.D.. It has the most unordinary shape that we could not find any other costume culture. It has very important meaning to study on the Kasaya in the religious and cultural history of Korean costume. We have to study Korean Kasaya from surveying Indian Buddhist Kasaya diachronicaly. Buddha establishes himself the rules of weaving, coloring and wearing Kasaya. Bunso costume(분소의)is the first shape of Kasaya that he has worn during his ascetic practice. Bunso costume was a kind of shari. It is made with diapers those clean ordure of baby It symbolizes the life of ascetic practice. However Buddha could not stick to it as the only costume of monks. From his age Buddhist devotees have thought Buddha and monks as sacred beings. So they eagerly want to Provide the sacred beings with foods. clothes and other things that samgha(승가) need to live and accomplish their duties. At that time there are many kings, aristocracies and rich merchants among the devotees. They often offered them the luxurious silk Kasaya. that the ascetic monks could not wear. to express their deep faith. So the rules of the samgha has been distorted. The samgha has enlarged day by day as a great huge religious association. There are many different shapes of Kasaya. The Buddhist samgha need to establish a minute and rigid rules of Kasaya to order living of monks and to teach the moral and educational life to ordinary people. That book of rule is Vinaya pitaka(율장) . There are many kinds of Vinaya pitaka. This paper surveys the rules of Kasaya from Southern Vinaya pitaka(남전율장). This study will be the basic ground to research the Korean Buddhist Kasaya.

• Journal of Environmental Science International
• /
• v.27 no.7
• /
• pp.519-529
• /
• 2018

With rapid economic growth, the urban environment has created a problem of human physical and mental illness. In order to solve these problems, urban forests have emerged as a way to mitigate the environmental risks through improving the polluted environment of the city and improve the quality of life. As the urban forests have expanded, the school forests movement has also been taking an important place recently. The study focused on the performance of school forests by comparing the perceptions among teachers and students about their functions. The questionnaire was composed of 4 questions concerning human matters, 10 questions for space recognition, 4 questions for thermal environment, 2 questions for health promotion, and 20 total questions for composition of survey items. The reliability of the school forest function, number of tree planting areas and quantities, the harmony of the planting, and the satisfaction of the school forest were analyzed in the questionnaire conducted by the school members. Although it does not recognize school forests, it has a positive response to the green space that is built outdoors. It is considered that outdoor education and environmental education are sufficient in school forests and green spaces. The results showed that the outdoor green space was more satisfactory when compared with the general school. Teachers and students' preferences were similar to 'seasonal changes' and' trees of various colors and shapes'. The reliability analysis between each item shows that the coefficient for cronbach's ${\alpha}$ was .700 to .834. The purpose of this study is to identify the perception of forest function among school forest members and to utilize them as a basic data in the future.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.7
• /
• pp.998-1009
• /
• 1999

In this paper, a microstrip aperture-patch antenna and a microstrip ring antenna, which have single microstrip line feeding systems for the circular polarization, are designed, and experimental results are presented at X-band. The microstrip aperture-patch antenna is characterized by its wide operating frequency range, and the microstrip ring antenna is suitable for a basic radiator in the large array antenna due to its small size. Several design parameters for these antennas are considered and analyzed to improve antenna characteristics such as VSWR bandwidth and axial ratio. Initially, the sizes of the aperture and ring radiator are determined on a basis of the cavity model, then shapes of the patch within the aperture and the inner stub of the ring are optimized using Ensemble software. Measurement results show that the aperture-patch antenna has 25% of VSWR bandwidth and 1.2dB of axial ratio at the boresight, and the ring antenna has 6.7% of VSWR bandwidth and 1.6dB of axial ratio at the boresight.

• Journal of Korea Game Society
• /
• v.14 no.2
• /
• pp.55-66
• /
• 2014

Image warping is a technology to transform input images to be suitable for given conditions and has been recently utilized in changing face shape of characters in the field of movies or animation. Mesh warping which is one of warping methods that change shapes based on the features of face forms warping images by forming rectangular mesh groups around the eyes, nose, and mouth and matching them 1:1. This method has a problem in the resultant images are distorted in the segments of boundaries between meshes when there are errors in mesh control points or when meshes have been formed as many small area meshes. This study proposes a triangle based image interpolation technique to minimize the occurrence of errors in the process of forming natural warping images of face and process accurate results with a small amount of arithmetic operation and a short time. First, feature points that represent the face are found and these points are connected to form basic triangle meshes. The fact that the proposed method can reduce errors occurring in the process of warping while reducing the amount of arithmetic operation and time is shown through experiments.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.1
• /
• pp.591-596
• /
• 2016

Numerical analyses were performed on the heat flow characteristics of a heat transfer plate with six different shapes (basic, rectangle, triangle, wave type) to reduce the level of white smoke at a stack. In this study, to examine the heat transfer performance (heat transfer capacity, pressure drop, turbulence kinetic energy, heat transfer coefficient) on the heat transfer plates, simulations were conducted using the commercial computational fluid dynamics software, ANSYS CFX Ver.14 under uniform flow conditions. The thermal flow phenomenon in a channel with six heat transfer plates could be predicted adequately under uniform flow conditions. The heat transfer capacity, pressure drop, turbulence kinetic energy, and heat transfer coefficient were affected by the flow rate, aspect ratio and plate shape. These results provide guidelines to design an effective heat exchanger with the wave type to reduce white smoke.