• Bulletin of the Korean Chemical Society
• /
• 제26권3호
• /
• pp.470-472
• /
• 2005

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2003년도 제24회 학술발표회 초록집
• /
• pp.170-170
• /
• 2003

• Bulletin of the Korean Chemical Society
• /
• 제24권10호
• /
• pp.1538-1540
• /
• 2003

• Bulletin of the Korean Chemical Society
• /
• 제24권5호
• /
• pp.681-683
• /
• 2003

• 대한화학회지
• /
• 제54권6호
• /
• pp.766-770
• /
• 2010

본 연구는 전이금속이 치환된 묽은 자성 반도체의 자기적 특성을 연구하였다. 울츠자이트(wurtzite) 구조를 가지는 화합물은 졸-겔(sol-gel)법을 이용하여 합성하였다. 열역학적 특성과 자기적 특성을 가진 $Zn_{1-x}Co_xO$은 단일상으로 나타났으며, 농도에 따라 다른 특성을 보여주었다. 묽은 자성 반도체의 특성을 조사하기 위해 X-ray diffraction (XRD), scanning electronic microscope (SEM) 및 vibrating sample magnetometer (VSM)을 사용하였다. 구조 분석을 통해 단일상이 확인된 시료에서는 모두 강자성 특성이 발견되었고, 전이금속 이온의 농도를 5%이상 치환이 되면 강자성이 감소하는 현상이 나타났다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.333-333
• /
• 2013

The poor conductivity of poly (3,4-ethylene dioxythiophene): poly (styrenesulfonate) (PEDOT:PSS) film hinders to use for a flexible electrode in solar cells. In this report we demonstrate that the conductivity of PEDOT:PSS film can be enhanced by modifying structures in a mixture of PEDOT: PSS aqueous solution and various organic solvents such as polar protic (2-propanol, methanol, ethanol, formic acid) and aprotic solvents (acetone and acetonitrile). To comparatively study the structural effects on the resulted electrical properties, the films are spin-coated on glasses and ITO. At the same time, a contact angle goniometer is used for clarifying a mechanism of wettability of PEDOT (hydrophobic) and PSS (hydrophilic) on the observed conductivity. The structures and electrical properties are investigated by FE-SEM (Field Emission Scanning Electron Microscopy), AFM (Atomic Force Microscopy), and 4-point probe, respectively.

• Bulletin of the Korean Chemical Society
• /
• 제30권1호
• /
• pp.201-204
• /
• 2009

$BaTiO_3/SrTiO_3$ and $PbTiO_3/PbZrO_3$ superlattice thin films were fabricated on $Pt/Ti/SiO_2/Si$ substrate by the pulsed laser deposition process. The morphologies and physical properties of deposited films were characterized by using X-ray diffractometer, HR-SEM, and Impedance Analyzer. XRD data and SEM images of the films indicate that each layer was well deposited alternatively in the superlattice structure. The dielectric constant of $BaTiO_3/SrTiO_3$ superlattice thin film was higher than that of individual $BaTiO_3$ or $SrTiO_3$ film. Same result was obtained in the $PbTiO_3/PbZrO_3$system. The dielectric constant of a superlattice film was getting higher as the number of layer is increased.

• Structural Engineering and Mechanics
• /
• 제6권6호
• /
• pp.659-671
• /
• 1998

Exercise of complete control on all aspects of any manufacturing / fabrication process is very difficult, leading to uncertainties in the material properties and geometric dimensions of structural components. This is especially true for laminated composites because of the large number of parameters associated with its fabrication. When the basic parameters like elastic modulus, density and Poisson's ratio are random, the derived response characteristics such as deflections, natural frequencies, buckling loads, stresses and strains are also random, being functions of the basic random system parameters. In this study the basic elastic properties of a composite lamina are assumed to be independent random variables. Perturbation formulation is used to model the random parameters assuming the dispersions small compared to the mean values. The system equations are analyzed to obtain the mean and the variance of the plate natural frequencies. Several application problems of free vibration analysis of composite plates, employing the proposed method are discussed. The analysis indicates that, at times it may be important to include the effect of randomness in material properties of composite laminates.

• 한국의류학회지
• /
• 제24권1호
• /
• pp.87-95
• /
• 2000

The changes on shrinkage, dyeability, antimicrobial activities and other physical properties of wool fabrics by chitosan treatment were investigated. A acid dye, a basic dye and natural artemisia were used for dyeing of wool fabrics. For Antimicrobial test of wool fabrics, S.Aureus was used. As the results, The wool fabrics treated with chitosan showed a marked decrease in shrinkage. Dyeability increased slightly as concentration of chitosan treatment increased, Dyeability of acid dye was the highest than other dyes. On the other hand, the dyeability of basic dye on chitosan treated fabrics was lower than untreated fabrics. Reduction rates of colony of chitosan-treated wool fabrics showed from 64.8% to 85.24% as chitosan concentration increased. Reduction rates of colony of the chitosan-treated fabrics decreased by dyeing with acid and basic dye. But increased by retreating with chitosan. Fabrics dyeing with atremisia showed above 90% reduction rate against S.Aureus on all chitosan concentrations. The Tensile properties of chitosan-treated fabrics showed little decrease. The moisture regain and the air permeability was decreased on chitosan concentration on 0.1% but recovered as chitosan concentration increased. The warmth retention was increased a little by chitosan treatment. The drapeability became hard as chitosan concentration increased.

• International Journal of Reliability and Applications
• /
• 제1권2호
• /
• pp.133-143
• /
• 2000

Data from weighted distributions appear, among other situations, when some of the data are missing or are damaged, a case that is important in reliability and life testing. The kernel method for hazard rate estimation is discussed for these data where the basic large sample properties are given. As a by product, the basic properties of the kernel estimate of the distribution function for data from weighted distribution are presented.